• Shopping Cart
    There are no items in your cart

ASTM E 23 : 2024

Current

Current

The latest, up-to-date edition.

Standard Test Methods for Notched Bar Impact Testing of Metallic Materials

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-04-2024

€80.76
Excluding VAT

Committee
E 28
DocumentType
Test Method
Pages
27
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

1.1These test methods describe notched-bar impact testing of metallic materials by the Charpy (simple-beam) test and the Izod (cantilever-beam) test. They give the requirements for: test specimens, test procedures, test reports, test machines (see Annex A1) verifying Charpy impact machines (see Annex A2), optional test specimen configurations (see Annex A3), designation of test specimen orientation (see Terminology E1823), and determining the shear fracture appearance (see Annex A4). In addition, information is provided on the significance of notched-bar impact testing (see Appendix X1), and methods of measuring the center of strike (see Appendix X2).

1.2These test methods do not address the problems associated with impact testing at temperatures below –196 °C (77 K).

1.3The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.3.1Exception—Section 9 and Annex A4 provide inch-pound units for information only.

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in Section 6.

1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM E 1820 : 2024 Standard Test Method for Measurement of Fracture Toughness
ASTM E 2215 : 2024 Standard Practice for Evaluation of Surveillance Capsules from Light-Water Moderated Nuclear Power Reactor Vessels
ASTM B 848/B848M : 2021 Standard Specification for Powder Forged (PF) Ferrous Materials
ASTM E 1823 : 2024 : REV A Standard Terminology Relating to Fatigue and Fracture Testing
ASTM E 1820 : 2023 : REV B Standard Test Method for Measurement of Fracture Toughness
ASTM D 950 : 2003 : R2020 : EDT 1 Standard Test Method for Impact Strength of Adhesive Bonds
ASTM B 969/B969M : 2018 : EDT 1 Standard Specification for Aluminum-Alloy Castings Produced by Squeeze Casting, and the Semi-Solid Thixocast and Rheocast Casting Processes
ASTM E 2215 : 2019 Standard Practice for Evaluation of Surveillance Capsules from Light-Water Moderated Nuclear Power Reactor Vessels
ASTM E 2298 : 2018 Standard Test Method for Instrumented Impact Testing of Metallic Materials
ASTM E 2248 : 2018 Standard Test Method for Impact Testing of Miniaturized Charpy V-notch Specimens
ASTM F 3056 : 2014 : R2021 Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion
ASTM B 86 : 2023 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloy Foundry and Die Castings
ASTM B 176 : 2018 Standard Specification for Copper-Alloy Die Castings
ASTM D 7269/D7269M : 2020 Standard Test Methods for Tensile Testing of Aramid Yarns
ASTM A 333/A333M : 2024 Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness
ASTM A 746 : 2018 : R2022 Standard Specification for Ductile Iron Gravity Sewer Pipe
ASTM F 3213 : 2017 Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Cobalt-28 Chromium-6 Molybdenum via Powder Bed Fusion
ASTM A 334/A334M : 2004 : REV A : R2021 Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service
ASTM E 706 : 2023 Standard Master Matrix for Light-Water Reactor Pressure Vessel Surveillance Standards
ASTM F 3318 : 2018 Standard for Additive Manufacturing – Finished Part Properties – Specification for AlSi10Mg with Powder Bed Fusion – Laser Beam
ASTM A 370 : 2024 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM E 1253 : 2021 Standard Guide for Reconstitution of Charpy-Sized Specimens
ASTM A 716 : 2018 : R2022 Standard Specification for Ductile Iron Culvert Pipe
ASTM B 925 : 2015 : R2022 Standard Practices for Production and Preparation of Powder Metallurgy (PM) Test Specimens
ASTM F 3184 : 2016 : R2023 Standard Specification for Additive Manufacturing Stainless Steel Alloy (UNS S31603) with Powder Bed Fusion
ASTM B 94 : 2018 Standard Specification for Magnesium-Alloy Die Castings
ASTM A 897/A897M : 2022 Standard Specification for Austempered Ductile Iron Castings
ASTM E 636 : 2020 Standard Guide for Conducting Supplemental Surveillance Tests for Nuclear Power Reactor Vessels
ASTM B 929 : 2023 Standard Specification for Copper-Nickel-Tin Spinodal Alloy Rod and Bar
ASTM A 788/A788M : 2023 Standard Specification for Steel Forgings, General Requirements
ASTM A 327/A327M : 2022 Standard Test Methods for Impact Testing of Cast Irons
ASTM F 3055 : 2014 : REV A : R2021 Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion
ASTM A 354 : 2017 : EDT 2 Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners
ASTM F 2924 : 2014 : R2021 Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion
ASTM E 1921 : 2023 : REV B Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >0</inf></emph>, for Ferritic Steels in the Transition Range
ASTM E 185 : 2021 Standard Practice for Design of Surveillance Programs for Light-Water Moderated Nuclear Power Reactor Vessels
ASTM B 1013 : 2022 Standard Specification for High Fluidity (HF) Zinc-Aluminum Alloy Thin Wall Die Castings
ASTM E 1221 : 2023 Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, <emph type="bdit">K<inf>Ia</inf></emph>, of Ferritic Steels
ASTM F 3607 : 2022 Standard Specification for Additive Manufacturing – Finished Part Properties – Maraging Steel via Powder Bed Fusion
ASTM A 1058 : 2019 Standard Test Methods for Mechanical Testing of Steel Products—Metric
ASTM B 752/B752M : 2022 Standard Specification for Castings, Zirconium-Base, Corrosion Resistant, for General Application
ASTM A 571/A571M : 2001 : R2023 : EDT 1 Standard Specification for Austenitic Ductile Iron Castings for Pressure-Containing Parts Suitable for Low-Temperature Service
ASTM F 3302 : 2018 Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Titanium Alloys via Powder Bed Fusion
ASTM A 1084 : 2015 : REV A : R2022 Standard Test Method for Detecting Detrimental Phases in Lean Duplex Austenitic/Ferritic Stainless Steels

ASTM E 1823 : 2024 : REV B Standard Terminology Relating to Fatigue and Fracture Testing
ASTM E 2298 : 2024 Standard Test Method for Instrumented Impact Testing of Metallic Materials
ASTM E 1823 : 2024 : REV C Standard Terminology Relating to Fatigue and Fracture Testing

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.