![header thumbnail](/images/publishers\astm_cover.gif)
ASTM E 2368 : 2010 : R2017
Current
The latest, up-to-date edition.
![header thumbnail](/images/publishers\astm_cover.gif)
Standard Practice for Strain Controlled Thermomechanical Fatigue Testing
Hardcopy , PDF
English
04-12-2017
This practice covers the determination of thermomechanical fatigue (TMF) properties of materials under uniaxially loaded strain-controlled conditions.
Committee |
E 08
|
DocumentType |
Standard Practice
|
Pages |
10
|
ProductNote |
Reconfirmed 2017
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
Supersedes |
1.1This practice covers the determination of thermomechanical fatigue (TMF) properties of materials under uniaxially loaded strain-controlled conditions. A “thermomechanical” fatigue cycle is here defined as a condition where uniform temperature and strain fields over the specimen gage section are simultaneously varied and independently controlled. This practice is intended to address TMF testing performed in support of such activities as materials research and development, mechanical design, process and quality control, product performance, and failure analysis. While this practice is specific to strain-controlled testing, many sections will provide useful information for force-controlled or stress-controlled TMF testing.
1.2This practice allows for any maximum and minimum values of temperature and mechanical strain, and temperature-mechanical strain phasing, with the restriction being that such parameters remain cyclically constant throughout the duration of the test. No restrictions are placed on environmental factors such as pressure, humidity, environmental medium, and others, provided that they are controlled throughout the test, do not cause loss of or change in specimen dimensions in time, and are detailed in the data report.
1.3The use of this practice is limited to specimens and does not cover testing of full-scale components, structures, or consumer products.
1.4The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM F 3122 : 2014 | Standard Guide for Evaluating Mechanical Properties of Metal Materials Made via Additive Manufacturing Processes |
ASTM F 3055 : 2014 : REV A | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion |
ASTM F 2924 : 2014 | Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion |
ASTM F 3213 : 2017 | Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Cobalt-28 Chromium-6 Molybdenum via Powder Bed Fusion |
ASTM F 3318 : 2018 | Standard for Additive Manufacturing – Finished Part Properties – Specification for AlSi10Mg with Powder Bed Fusion – Laser Beam |
ASTM F 3184 : 2016 | Standard Specification for Additive Manufacturing Stainless Steel Alloy (UNS S31603) with Powder Bed Fusion |
ASTM F 3302 : 2018 | Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Titanium Alloys via Powder Bed Fusion |
ASTM E 3097 : 2017 | Standard Test Method for Mechanical Uniaxial Constant Force Thermal Cycling of Shape Memory Alloys |
ASTM F 3056 : 2014 : EDT 1 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion |
ASTM E 3098 : 2017 | Standard Test Method for Mechanical Uniaxial Pre-strain and Thermal Free Recovery of Shape Memory Alloys |
ASTM E 2714 : 2013 | Standard Test Method for Creep-Fatigue Testing |
ASTM E 1823 : 2024 | Standard Terminology Relating to Fatigue and Fracture Testing |
ASTM E 220 : 2019 | Standard Test Method for Calibration of Thermocouples By Comparison Techniques |
ASTM E 83 : 2023 | Standard Practice for Verification and Classification of Extensometer Systems |
ASTM E 1012 : 2014 | Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application |
ASTM E 1823 : 2024 : REV A | Standard Terminology Relating to Fatigue and Fracture Testing |
ASTM E 1823 : 2012 : REV : EDT 0 | Standard Terminology Relating to Fatigue and Fracture Testing |
ASTM E 1823 : 2007 : REV A | Standard Terminology Relating to Fatigue and Fracture Testing |
ASTM E 83 : 2000 : EDT 1 | Standard Practice for Verification and Classification of Extensometer |
ASTM E 606 : 1992 : R1998 | Standard Practice for Strain-Controlled Fatigue Testing |
ASTM E 83 : 2016 | Standard Practice for Verification and Classification of Extensometer Systems |
ASTM E 1823 : 2009 : REV A | Standard Terminology Relating to Fatigue and Fracture Testing |
ASTM E 83 : 1998 : EDT 1 | Standard Practice for Verification and Classification of Extensometer |
ASTM E 337 : 2015 : R2023 | Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures) |
ASTM E 337 : 2015 | Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures) |
ASTM E 3 : 2011 : R2017 | Standard Guide for Preparation of Metallographic Specimens |
ASTM E 1012 : 1999 | Standard Practice for Verification of Specimen Alignment Under Tensile Loading |
ASTM E 1012 : 2012 | Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application |
ASTM E 83 : 2016 : REDLINE | Standard Practice for Verification and Classification of Extensometer Systems |
ASTM E 1012 : 2014 : EDT 1 | Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application |
ASTM E 1823 : 2005 : REV A : EDT 1 | Standard Terminology Relating to Fatigue and Fracture Testing |
ASTM E 1823 : 2010 : REV A | Standard Terminology Relating to Fatigue and Fracture Testing |
ASTM E 1823 : 2021 | Standard Terminology Relating to Fatigue and Fracture Testing |
ASTM E 1823 : 2009 : REV B | Standard Terminology Relating to Fatigue and Fracture Testing |
ASTM E 1823 : 2012 : REV D | Standard Terminology Relating to Fatigue and Fracture Testing |
ASTM E 1823 : 2012 : REV B | Standard Terminology Relating to Fatigue and Fracture Testing |
ASTM E 1012 : 2012 : EDT 1 | Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application |
ASTM E 1012 : 2005 | Standard Practice for Verification of Test Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application |
ASTM E 337 : 2015 : REDLINE | Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures) |
ASTM E 4 : 2021 | Standard Practices for Force Calibration and Verification of Testing Machines |
ASTM E 220 : 2013 : REDLINE | Standard Test Method for Calibration of Thermocouples By Comparison Techniques |
ASTM E 1823 : 1996 : R2002 | Standard Terminology Relating to Fatigue and Fracture Testing |
ASTM E 1823 : 1996 : EDT 1 | Standard Terminology Relating to Fatigue and Fracture Testing |
ASTM E 467 : 2008 : R2014 | Standard Practice for Verification of Constant Amplitude Dynamic Forces in an Axial Fatigue Testing System |
ASTM E 1823 : 2012 : REV A | Standard Terminology Relating to Fatigue and Fracture Testing |
ASTM E 1823 : 2007 | Standard Terminology Relating to Fatigue and Fracture Testing |
ASTM E 111 : 2017 : REDLINE | Standard Test Method for Young’s Modulus, Tangent Modulus, and Chord Modulus |
ASTM E 112 : 2013 : R2021 | Standard Test Methods for Determining Average Grain Size |
ASTM E 112 : 2013 | Standard Test Methods for Determining Average Grain Size |
ASTM E 1823 : 2023 | Standard Terminology Relating to Fatigue and Fracture Testing |
ASTM E 467 : 2021 | Standard Practice for Verification of Constant Amplitude Dynamic Forces in an Axial Fatigue Testing System |
ASTM E 1823 : 2013 | Standard Terminology Relating to Fatigue and Fracture Testing |
ASTM E 1823 : 2012 : REV C | Standard Terminology Relating to Fatigue and Fracture Testing |
ASTM E 1823 : 2020 : REV B | Standard Terminology Relating to Fatigue and Fracture Testing |
ASTM E 112 : 2024 | Standard Test Methods for Determining Average Grain Size |
ASTM E 1012 : 2019 | Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application |
ASTM E 1823 : 2005 : REV A | Standard Terminology Relating to Fatigue and Fracture Testing |
ASTM E 1823 : 2011 | Standard Terminology Relating to Fatigue and Fracture Testing |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.