![header thumbnail](/images/publishers\astm_cover.gif)
ASTM E 2568 : 2017 : REV A
Current
The latest, up-to-date edition.
![header thumbnail](/images/publishers\astm_cover.gif)
Standard Specification for PB Exterior Insulation and Finish Systems
Hardcopy , PDF
English
06-03-2017
Committee |
E 06
|
DocumentType |
Standard
|
Pages |
3
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
Supersedes |
1.1This specification covers PB Exterior Insulation and Finish Systems (EIFS) defined as an exterior, non-bearing wall covering providing a weather-resistant exterior wall envelope on walls required to be combustible or noncombustible, fire-resistance-rated or nonfire-resistance-rated. Further, PB EIFS is a system described as being applied over expanded polystyrene or polyisocyanurate insulation board, an adhesive or mechanical attachment of the insulation board to a substrate, or both, glass fiber reinforcing mesh, a base coat on the face of the insulation board, and a textured protective finish coat.
1.2This specification does not cover Class PB EIFS with drainage.
1.3This specification qualifies EIFS products for use in normal service conditions and is not for evaluating in service EIFS installations.
1.4The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
ASTM C 1397 : 2013 : R2019 | Standard Practice for Application of Class PB Exterior Insulation and Finish Systems (EIFS) and EIFS with Drainage |
ASTM C 1481 : 2012 : R2017 | Standard Guide for Use of Joint Sealants with Exterior Insulation and Finish Systems (EIFS) |
ASTM C 1289 : 2015 | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
ASTM C 1289 : 2011 : REV A | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
ASTM E 84 : 2023 : REV D | Standard Test Method for Surface Burning Characteristics of Building Materials |
ASTM C 1289 : 2014 | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
ASTM D 2247 : 2010 | Standard Practice for Testing Water Resistance of Coatings in 100% Relative Humidity |
ASTM E 2486/E2486M : 2022 | Standard Test Method for Impact Resistance of Class PB and PI Exterior Insulation and Finish Systems (EIFS) |
ASTM C 1289 : 2016 : REV A | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
ASTM E 84 : 2023 : REV C | Standard Test Method for Surface Burning Characteristics of Building Materials |
ASTM E 119 : 2024 | Standard Test Methods for Fire Tests of Building Construction and Materials |
ASTM C 1289 : 2012 : REV A | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
ASTM E 2110 : 2003 | Standard Terminology for Exterior Insulation and Finish Systems (EIFS) |
ASTM G 153 : 2013 | Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials |
ASTM C 1289 : 2023 : REV A | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
ASTM C 1289 : 2008 | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
ASTM D 2247 : 2011 | Standard Practice for Testing Water Resistance of Coatings in 100% Relative Humidity |
ASTM D 2247 : 2002 | Standard Practice for Testing Water Resistance of Coatings in 100% Relative Humidity |
ASTM G 23 : 1993 | Standard Practice for Operating Light-Exposure Apparatus (Carbon-Arc Type) With and Without Water for Exposure of Nonmetalic Materials |
ASTM C 1289 : 2022 | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
ASTM E 84 : 2023 | Standard Test Method for Surface Burning Characteristics of Building Materials |
ASTM D 2247 : 1992 | Standard Practice for Testing Water Reistence of Coatings in 100% Relative Humidity |
ASTM C 1289 : 2006 | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
ASTM E 84 : 2021 | Standard Test Method for Surface Burning Characteristics of Building Materials |
ASTM C 578 : 2019 | Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation |
ASTM E 84 : 2022 | Standard Test Method for Surface Burning Characteristics of Building Materials |
ASTM D 2247 : 2015 | Standard Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity |
ASTM E 119 : 2022 | Standard Test Methods for Fire Tests of Building Construction and Materials |
ASTM E 2110 : 2017 | Standard Terminology for Exterior Insulation and Finish Systems (EIFS) |
ASTM C 1289 : 2008 : EDT 1 | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
ASTM E 330/E330M : 2014 : R2021 | Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference |
ASTM C 1289 : 2005 : REV A | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
ASTM E 119 : 2023 | Standard Test Methods for Fire Tests of Building Construction and Materials |
ASTM C 1289 : 2007 | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
ASTM E 2110 : 2009 : EDT 1 | Standard Terminology for Exterior Insulation and Finish Systems (EIFS) |
ASTM C 1289 : 2012 : EDT 1 | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
ASTM E 84 : 2020 | Standard Test Method for Surface Burning Characteristics of Building Materials |
ASTM C 1289 : 2014 : REV A | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
ASTM E 84 : 2021 : REV A | Standard Test Method for Surface Burning Characteristics of Building Materials |
ASTM G 155 : 2021 | Standard Practice for Operating Xenon Arc Lamp Apparatus for Exposure of Materials |
ASTM C 1289 : 2005 | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
ASTM C 578 : 2022 | Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation |
ASTM C 1289 : 2023 | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
ASTM E 2098/E2098M : 2013 : R2023 | Standard Test Method for Determining Tensile Breaking Strength of Glass Fiber Reinforcing Mesh for Use in Class PB Exterior Insulation and Finish Systems (EIFS), after Exposure to a Sodium Hydroxide Solution |
ASTM B 117 : 2019 | Standard Practice for Operating Salt Spray (Fog) Apparatus |
ASTM C 1289 : 2001 | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
ASTM D 2247 : 2015 : R2020 | Standard Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity |
ASTM G 153 : 2013 : R2021 | Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials |
ASTM C 1289 : 2013 | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
ASTM C 1289 : 2002 | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
ASTM C 1289 : 2022 : REV A | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
ASTM G 26 : 1996 | Practice for Operating Light-Exposure Apparatus (Xenon-Arc Type) With and Without Water for Exposure of Nonmetallic Materials (Withdrawn 2000) |
ASTM C 1289 : 2010 | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
ASTM E 84 : 2023 : REV B | Standard Test Method for Surface Burning Characteristics of Building Materials |
ASTM C 1289 : 2020 | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
ASTM C 1289 : 2016 | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
ASTM E 331 : 2000 : R2023 | Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference |
ASTM G 155 : 2013 | Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials |
ASTM C 1289 : 2018 | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
ASTM C 1289 : 2012 | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
ASTM C 1289 : 2021 | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
ASTM C 1289 : 2004 | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
ASTM C 578 : 2023 | Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation |
ASTM E 2110 : 2011 | Standard Terminology for Exterior Insulation and Finish Systems (EIFS) |
ASTM E 119 : 2020 | Standard Test Methods for Fire Tests of Building Construction and Materials |
ASTM G 23 : 1996 | Practice for Operating Light-Exposure Apparatus (Carbon-Arc Type) With and Without Water for Exposure of Nonmetallic Materials (Withdrawn 2000) |
ASTM E 331 : 2000 : R2016 | Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference |
ASTM E 2486/E2486M : 2013 : R2018 | Standard Test Method for Impact Resistance of Class PB and PI Exterior Insulation and Finish Systems (EIFS) |
ASTM E 84 : 2023 : REV A | Standard Test Method for Surface Burning Characteristics of Building Materials |
ASTM C 1289 : 2013 : EDT 1 | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
ASTM E 119 : 2007 | Standard Test Methods for Fire Tests of Building Construction and Materials |
ASTM D 2247 : 2015 : R2020 : EDT 1 | Standard Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity |
ASTM C 1289 : 2011 | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
ASTM D 2247 : 1968 : R1973 | Standard Method for Testing Coated Metal Specimens At 100% Relative Humidity |
ASTM C 1289 : 2017 | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
ASTM E 2098/E2098M : 2013 : R2018 | Standard Test Method for Determining Tensile Breaking Strength of Glass Fiber Reinforcing Mesh for Use in Class PB Exterior Insulation and Finish Systems (EIFS), after Exposure to a Sodium Hydroxide Solution |
ASTM E 2110 : 2000 | Standard Terminology for Exterior Insulation and Finish Systems (EIFS) |
ASTM D 2247 : 1999 | Standard Practice for Testing Water Resistance of Coatings in 100% Relative Humidity |
ASTM C 1289 : 2003 | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
ASTM E 330/E330M : 2014 | Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference |
ASTM C 1289 : 1998 | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
ASTM C 1289 : 2018 : REV A | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.