ASTM E 2616 : 2009 : R2014
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Guide for Remedy Selection Integrating Risk-Based Corrective Action and Non-Risk Considerations
Hardcopy , PDF
19-11-2020
English
23-01-2015
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 11.05, 2015 Defines the selection of appropriate remedial actions at sites where a release of chemicals (for example, vapor-phase, dissolved-phase, or non-aqueous phase liquids (NAPL)) into the environment has occurred.
| Committee |
E 50
|
| DocumentType |
Guide
|
| Pages |
17
|
| ProductNote |
Reconfirmed 2014
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This guide covers the selection of appropriate remedial actions at sites where a release of chemicals (for example, vapor-phase, dissolved-phase, or non-aqueous phase liquids (NAPL)) into the environment has occurred. This overall remedy selection process is illustrated in Fig. 1. The guide is intended to be applied within a risk-based corrective action (RBCA) framework.
1.5.1Development of risk-based remedial action objectives that includes identification of complete exposure pathways and numeric remedial action levels (Section 5).
1.5.2Development of non-risk remedial action objectives based on resource protection and other non-risk considerations. Resource protection objectives typically include numeric remedial action levels while other non-risk criteria are typically non-numeric and may include: remediation timeframe, implementability, cost effectiveness, regulatory compliance, property use requirements, liability control, and community concern (Section 5).
1.5.3Evaluation of protectiveness to identify protective remedial actions that will be effective and timely for each risk-based remedial action objective for the site (Section 6).
1.5.4Evaluation of the retained remedies using the non-risk remedial action objectives to identify acceptable remedial actions that satisfy the minimum level for each non-risk criterion (Section 7).
1.5.5Remedial action selection to select the acceptable remedial action to be implemented at the site (Section 8).
1.5.6Remedy design and implementation to ensure that the selected remedy is effectively implemented at the site and satisfies the remedial action objectives (Section 9).
1.6This guide is intended for use in the selection of final remedial actions. This guide may also be used in the selection of interim measures provided that risk-based remedial action objectives and non-risk remedial action objectives are available for the evaluation of these interim measures.
1.7The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.8This guide is not intended to specifically address contractor health and safety issues. It is the responsibility of the user of this guide to ensure that Occupational Safety and Health Administration (OSHA) regulatory requirements are met,and appropriate industry practices are consulted for guidance.
1.9This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM E 2681 : 2013 | Standard Guide for Environmental Management of Underground Storage Tank Systems Storing Hazardous Substances or Petroleum |
| ASTM E 3164 : 2018 | Standard Guide for Sediment Corrective Action – Monitoring |
| ASTM E 2091 : 2017 | Standard Guide for Use of Activity and Use Limitations, Including Institutional and Engineering Controls |
| ASTM E 3155 : 2019 | Standard Guide for Assessing Mammal Health at Chemically Contaminated Terrestrial Sites Using Rodent Sperm Analysis |
| ASTM E 2531 : 2006 | Standard Guide for Development of Conceptual Site Models and Remediation Strategies for Light Nonaqueous-Phase Liquids Released to the Subsurface |
| ASTM E 1689 : 1995 : R2008 | Standard Guide for Developing Conceptual Site Models for Contaminated Sites |
| ASTM E 2091 : 2011 | Standard Guide for Use of Activity and Use Limitations, Including Institutional and Engineering Controls |
| ASTM D 6235 : 2004 | Standard Practice for Expedited Site Characterization of Vadose Zone and Ground Water Contamination at Hazardous Waste Contaminated Sites |
| ASTM E 2531 : 2006 : EDT 1 | Standard Guide for Development of Conceptual Site Models and Remediation Strategies for Light Nonaqueous-Phase Liquids Released to the Subsurface |
| ASTM E 2091 : 2017 | Standard Guide for Use of Activity and Use Limitations, Including Institutional and Engineering Controls |
| ASTM E 1739 : 1995 : R2015 | Standard Guide for Risk-Based Corrective Action Applied at Petroleum Release Sites (Withdrawn 2024) |
| ASTM E 1739 : 1995 : EDT 1 | Standard Guide for Risk-Based Corrective Action Applied at Petroleum Release Sites |
| ASTM E 1739 : 1995 : R2002 | Standard Guide for Risk-Based Corrective Action Applied at Petroleum Release Sites |
| ASTM E 2081 : 2000 : R2015 | Standard Guide for Risk-Based Corrective Action |
| ASTM D 6235 : 2004 : R2010 | Standard Practice for Expedited Site Characterization of Vadose Zone and Groundwater Contamination at Hazardous Waste Contaminated Sites |
| ASTM E 1689 : 1995 : R2003 : EDT 1 | Standard Guide for Developing Conceptual Site Models for Contaminated Sites |
| ASTM E 2435 : 2005 : R2015 | Standard Guide for Application of Engineering Controls to Facilitate Use or Redevelopment of Chemical-Affected Properties |
| ASTM E 2531 : 2006 : R2014 | Standard Guide for Development of Conceptual Site Models and Remediation Strategies for Light Nonaqueous-Phase Liquids Released to the Subsurface |
| ASTM D 7294 : 2013 : REDLINE | Standard Guide for Collecting Treatment Process Design Data at a Contaminated Site—A Site Contaminated With Chemicals of Interest |
| ASTM E 1689 : 1995 | Standard Guide for Developing Conceptual Site Models for Contaminated Sites |
| ASTM E 2435 : 2005 | Standard Guide for Application of Engineering Controls to Facilitate Use or Redevelopment of Chemical-Affected Properties |
| ASTM E 1739 : 1995 : R2010 : EDT 1 | Standard Guide for Risk-Based Corrective Action Applied at Petroleum Release Sites |
| ASTM E 2091 : 2005 | Standard Guide for Use of Activity and Use Limitations, Including Institutional and Engineering Controls |
| ASTM E 2091 : 2019 | Standard Guide for Use of Activity and Use Limitations, Including Institutional and Engineering Controls |
| ASTM D 6235 : 1998 : REV A | Standard Practice for Expedited Site Characterization of Vadose Zone and Ground Water Contamination at Hazardous Waste Contaminated Sites |
| ASTM D 6235 : 2018 | Standard Practice for Expedited Site Characterization of Vadose Zone and Groundwater Contamination at Hazardous Waste Contaminated Sites |
| ASTM E 1943 : 1998 | Standard Guide for Remediation of Ground Water by Natural Attenuation at Petroleum Release Sites |
| ASTM E 2435 : 2005 : R2010 : EDT 1 | Standard Guide for Application of Engineering Controls to Facilitate Use or Redevelopment of Chemical-Affected Properties |
| ASTM D 7294 : 2013 | Standard Guide for Collecting Treatment Process Design Data at a Contaminated Site—A Site Contaminated With Chemicals of Interest |
| ASTM E 2081 : 2000 | Standard Guide for Risk-Based Corrective Action |
| ASTM E 2205 : 2002 | Standard Guide for Risk-Based Corrective Action for Protection of Ecological Resources |
| ASTM E 1943 : 1998 : R2010 | Standard Guide for Remediation of Ground Water by Natural Attenuation at Petroleum Release Sites |
| ASTM E 1912 : 1998 : R2004 | Standard Guide for Accelerated Site Characterization for Confirmed or Suspected Petroleum Releases (Withdrawn 2013) |
| ASTM D 7294 : 2006 | Standard Guide for Collecting Treatment Process Design Data at a Contaminated Site-A Site Contaminated With Chemicals of Interest |
| ASTM E 1943 : 1998 : R2015 | Standard Guide for Remediation of Ground Water by Natural Attenuation at Petroleum Release Sites (Withdrawn 2024) |
| ASTM E 2081 : 2000 : R2004 : EDT 1 | Standard Guide for Risk-Based Corrective Action |
| ASTM E 1943 : 1998 : R2004 | Standard Guide for Remediation of Ground Water by Natural Attenuation at Petroleum Release Sites |
| ASTM E 2091 : 2000 | Standard Guide for Use of Activity and Use Limitations, Including Institutional and Engineering Controls |
| ASTM E 1912 : 1998 | Standard Guide for Accelerated Site Characterization for Confirmed or Suspected Petroleum Releases |
| ASTM E 1689 : 1995 : R2014 | Standard Guide for Developing Conceptual Site Models for Contaminated Sites |
| ASTM E 2081 : 2000 : R2010 : EDT 1 | Standard Guide for Risk-Based Corrective Action |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.