ASTM E 2693 : 2019
Current
The latest, up-to-date edition.
Standard Practice for Prevention of Dermatitis in the Wet Metal Removal Fluid Environment
Hardcopy , PDF
English
01-10-2019
Committee |
E 34
|
DocumentType |
Standard Practice
|
Pages |
10
|
ProductNote |
This standard is also refers to 29 CFR 1910.133,29 CFR 1910.134,29 CFR 1910.138,29 CFR 1910.1048,29 CFR 1910.1200,29 CFR 1910 Appendix B to Subpart I.
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
Supersedes |
1.1This practice sets forth guidelines for reducing dermatitis caused by exposure to the wet metal removal environment. The scope of this practice does not include exposure to chemicals that enter the body through intact skin (cutaneous route), which has the potential to cause other toxic effects.
1.2This practice incorporates means and mechanisms to reduce dermal exposure to the wet metal removal environment and to control factors in the wet metal removal environment that have the potential to cause dermatitis.
1.3This practice focuses on employee exposure to the skin via contact and exposure to metal removal fluid (MRF).
1.4The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM E 2148 : 2016 | Standard Guide for Using Documents Related to Metalworking or Metal Removal Fluid Health and Safety |
ASTM E 2889 : 2012 : R2017 | Standard Practice for Control of Respiratory Hazards in the Metal Removal Fluid Environment |
ASTM E 2523 : 2013 : R2018 | Standard Terminology for Metalworking Fluids and Operations |
ASTM E 2525 : 2008 : R2013 | Standard Test Method for Evaluation of the Effect of Nanoparticulate Materials on the Formation of Mouse Granulocyte-Macrophage Colonies (Withdrawn 2022) |
ASTM E 1497 : 2023 | Standard Practice for Selection and Safe Use of Water-Miscible and Straight Oil Metal Removal Fluids |
ASTM E 2889 : 2023 | Standard Practice for Control of Respiratory Hazards in the Metal Removal Fluid Environment |
ASTM E 1542 : 2021 | Standard Terminology Relating to Occupational Health and Safety |
ASTM E 1542 : 2020 : REV A | Standard Terminology Relating to Occupational Health and Safety |
ASTM D 1356 : 2017 | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
ASTM E 2525 : 2022 | Standard Test Method for Evaluation of the Effect of Nanoparticulate Materials on the Formation of Mouse Granulocyte-Macrophage Colonies |
ASTM E 1302 : 2013 : R2017 | Standard Guide for Acute Animal Toxicity Testing of Water-Miscible Metalworking Fluids |
ASTM E 1542 : 2020 : REV B | Standard Terminology Relating to Occupational Health and Safety |
ASTM E 1302 : 2023 | Standard Guide for Acute Animal Toxicity Testing of Water-Miscible Metalworking Fluids |
ASTM E 1542 : 2020 | Standard Terminology Relating to Occupational Health and Safety |
ASTM E 1542 : 2018 | Standard Terminology Relating to Occupational Health and Safety |
ASTM E 1497 : 2017 | Standard Practice for Selection and Safe Use of Water-Miscible and Straight Oil Metal Removal Fluids |
ASTM D 1356 : 2020 | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
ASTM E 2169 : 2022 | Standard Practice for Selecting Antimicrobial Pesticides for Use in Water-Miscible Metalworking Fluids |
ASTM E 2169 : 2017 | Standard Practice for Selecting Antimicrobial Pesticides for Use in Water-Miscible Metalworking Fluids |
ASTM D 2881 : 1973 : R1983 | Classification of Metal Working Fluids and Related Materials (Withdrawn 1990) |
ASTM E 2148 : 2021 | Standard Guide for Using Documents Related to Metalworking or Metal Removal Fluid Health and Safety |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.