![header thumbnail](/images/publishers\astm_cover.gif)
ASTM E 2756 : 2019
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
![header thumbnail](/images/publishers\astm_cover.gif)
Standard Terminology Relating to Antimicrobial and Antiviral Agents
Hardcopy , PDF
22-05-2024
English
12-11-2019
Committee |
E 35
|
DocumentType |
Reference Material
|
Pages |
5
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1The purpose of this terminology standard is to establish uniformity in terms used in the field of antimicrobial and antiviral agent testing. Terms are adapted from related fields such as regulatory terms defined by law and definitions as supported by test requirements.
1.2The terms are appropriate to the wide range of interest related to standards developed in the area of antimicrobial and antiviral testing.
1.3This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM E 3161 : 2018 | Standard Practice for Preparing a <emph type="bdit">Pseudomonas aeruginosa</emph > or <emph type="bdit">Staphylococcus aureus</emph> Biofilm using the CDC Biofilm Reactor |
ASTM E 3160 : 2018 | Standard Test Method for Quantitative Evaluation of the Antibacterial Properties of Porous Antibacterial Treated Articles |
ASTM E 3135 : 2018 | Standard Practice for Determining Antimicrobial Efficacy of Ultraviolet Germicidal Irradiation Against Microorganisms on Carriers with Simulated Soil |
ASTM E 1326 : 2015 : REV A | Standard Guide for Evaluating Non-culture Microbiological Tests |
ASTM E 1428 : 2015 : REV A | Standard Test Method for Evaluating the Performance of Antimicrobials in or on Polymeric Solids Against Staining by <i>Streptomyce species </i> (A Pink Stain Organism) (Withdrawn 2024) |
ASTM E 2197 : 2017 : EDT 1 | Standard Quantitative Disk Carrier Test Method for Determining Bactericidal, Virucidal, Fungicidal, Mycobactericidal, and Sporicidal Activities of Chemicals |
ASTM E 3179 : 2018 | Standard Test Method for Determining Antimicrobial Efficacy of Ultraviolet Germicidal Irradiation against Influenza Virus on Fabric Carriers with Simulated Soil |
ASTM E 3180 : 2018 | Standard Test Method for Quantification of a <emph type="ital">Bacillus subtilis</emph > Biofilm Comprised of Vegetative Cells and Spores Grown Using the Colony Biofilm Model |
ASTM E 2871 : 2019 | Standard Test Method for Determining Disinfectant Efficacy Against Biofilm Grown in the CDC Biofilm Reactor Using the Single Tube Method |
ASTM E 2895 : 2019 | Standard Practice for Producing High Titers of Viable and Semi-Purified Spores of Clostridium difficile using a Liquid Medium |
ASTM E 2870 : 2019 | Standard Practice for Evaluating Relative Effectiveness of Antimicrobial Handwashing Formulations using the Palmar Surface and Mechanical Hand Sampling |
ASTM E 723 : 2013 : R2019 | Standard Practice for Evaluation of Antimicrobials as Preservatives for Aqueous-Based Products Used in the Paper Industry (Bacterial Spoilage) |
ASTM E 2839 : 2018 | Standard Practice for Production and Storage of Spores of <emph type="bdit">C. difficile</emph > for Use in Efficacy Evaluation of Antimicrobial Agents |
ASTM E 1052 : 2011 | Standard Test Method to Assess the Activity of Microbicides against Viruses in Suspension |
ASTM E 1153 : 2014 | Standard Test Method for Efficacy of Sanitizers Recommended for Inanimate, Hard, Nonporous Non-Food Contact Surfaces |
ASTM E 1173 : 2015 | Standard Test Method for Evaluation of Preoperative, Precatheterization, or Preinjection Skin Preparations |
ASTM E 1839 : 2013 | Standard Test Method for Efficacy of Slimicides for the Paper Industry—Bacterial and Fungal Slime |
ASTM E 2274 : 2016 | Standard Test Method for Evaluation of Laundry Sanitizers and Disinfectants |
ASTM E 2406 : 2016 | Standard Test Method for Evaluation of Laundry Sanitizers and Disinfectants for Use in High Efficiency Washing Operations |
ASTM E 2613 : 2014 | Standard Test Method for Determining Fungus-Eliminating Effectiveness of Hygienic Handwash and Handrub Agents Using Fingerpads of Adults |
ASTM E 2722 : 2014 | Standard Test Method for Using Seeded-Agar for the Screening Assessment of Antimicrobial Activity in Fabric and Air Filter Media (Withdrawn 2022) |
ASTM E 2755 : 2015 | Standard Test Method for Determining the Bacteria-Eliminating Effectiveness of Healthcare Personnel Hand Rub Formulations Using Hands of Adults |
ASTM E 2894 : 2013 | Standard Test Method for Applying Aerosolized <i>Bacillus</i> Spores as Dry Inocula to Inanimate Surfaces (Withdrawn 2022) |
ASTM D 7847 : 2017 | Standard Guide for Interlaboratory Studies for Microbiological Test Methods |
ASTM E 2946 : 2013 | Standard Test Method for Determining the Bacteria-Reducing Effectiveness of Food-Handler Handwash Formulations Using Hands of Adults |
ASTM E 2922 : 2015 | Standard Guide for The Use of Standard Test Methods and Practices for Evaluating Antibacterial Activity on Textiles |
ASTM E 3011 : 2015 | Standard Test Method for In vitro production of <emph type="ital">Clostridium Difficile</emph > Spores |
ASTM E 3031 : 2015 | Standard Test Method for Determination of Antibacterial Activity on Ceramic Surfaces |
ASTM E 2967 : 2015 | Standard Test Method for Assessing the Ability of Pre-wetted Towelettes to Remove and Transfer Bacterial Contamination on Hard, Non-Porous Environmental Surfaces Using the Wiperator (Withdrawn 2024) |
ASTM E 3058 : 2016 | Standard Test Method for Determining the Residual Kill Activity of Hand Antiseptic Formulations |
ASTM E 3092 : 2018 | Standard Practice for Evaluating Efficacy of Vaporous Decontaminants on Materials Contaminated with <emph type="bdit">Bacillus</emph> Spores and Contained Within 0.2µm Filter-Capped Tubes |
ASTM E 3151 : 2018 | Standard Test Method for Determining Antimicrobial Activity and Biofilm Resistance Properties of Tube, Yarn, or Fiber Specimens |
ASTM E 2275 : 2019 | Standard Practice for Evaluating Water-Miscible Metalworking Fluid Bioresistance and Antimicrobial Pesticide Performance |
ASTM D 7978 : 2014 : R2019 | Standard Test Method for Determination of the Viable Aerobic Microbial Content of Fuels and Associated Water—Thixotropic Gel Culture Method |
ASTM E 645 : 2018 | Standard Practice for Evaluation of Microbicides Used in Cooling Water Systems |
ASTM E 2111 : 2012 : R2018 | Standard Quantitative Carrier Test Method to Evaluate the Bactericidal, Fungicidal, Mycobactericidal, and Sporicidal Potencies of Liquid Chemicals |
ASTM E 2799 : 2022 | Standard Test Method for Testing Disinfectant Efficacy against <emph type="bdit">Pseudomonas aeruginosa</emph> Biofilm using the MBEC Assay |
ASTM E 875 : 2020 | Standard Practice for Evaluation of Fungal Control Agents as Preservatives for Aqueous-Based Products Used in the Paper Industry |
ASTM E 2946 : 2021 | Standard Test Method for Determining the Bacteria-Reducing Effectiveness of Food-Handler Handwash Formulations Using Hands of Adults |
ASTM E 3161 : 2021 | Standard Practice for Preparing a <emph type="bdit">Pseudomonas aeruginosa</emph > or <emph type="bdit">Staphylococcus aureus</emph> Biofilm using the CDC Biofilm Reactor |
ASTM D 8070 : 2023 | Standard Test Method for Screening of Fuels and Fuel Associated Aqueous Specimens for Microbial Contamination by Lateral Flow Immunoassay |
ASTM E 2471 : 2023 | Standard Test Method for Using Seeded-Agar for the Screening Assessment of Antimicrobial Activity In Carpets |
ASTM E 1052 : 2020 | Standard Practice to Assess the Activity of Microbicides against Viruses in Suspension |
ASTM E 3152 : 2023 | Standard Guide for Standard Test Methods and Practices Available for Determining Antifungal Activity on Natural or Synthetic Substrates Treated with Antimicrobial Agents |
ASTM E 2315 : 2023 | Standard Guide for Assessment of Antimicrobial Activity Using a Time-Kill Procedure |
ASTM E 2149 : 2020 | Standard Test Method for Determining the Antimicrobial Activity of Antimicrobial Agents Under Dynamic Contact Conditions |
ASTM E 3371 : 2022 | Standard Test Method for Measuring the Ability of a Synthetic Polymeric Material to Resist Bacterial Adherence |
ASTM E 1326 : 2020 | Standard Guide for Evaluating Non-culture Microbiological Tests |
ASTM E 1839 : 2020 | Standard Practice for Efficacy of Slimicides for the Paper Industry—Bacterial and Fungal Slime |
ASTM E 3218 : 2021 | Standard Test Method for Quantitative Method for Testing Antimicrobial Agents against Spores of <emph type="ital">C. difficile</emph> on Hard, Nonporous Surfaces |
ASTM E 1874 : 2022 : EDT 1 | Standard Practice for Recovery of Microorganisms From Skin using the Cup Scrub Technique |
ASTM D 7847 : 2022 | Standard Guide for Interlaboratory Studies for Microbiological Test Methods |
ASTM E 3286 : 2021 | Standard Practice for Preparation Of Cell Monolayers on Glass Surfaces for Evaluation of Microbicidal Properties of Non-Chemical Based Antimicrobial Treatment Technologies |
ASTM E 2922 : 2023 | Standard Guide for Use of Standard Test Methods and Practices for Evaluating Antibacterial Activity on Textiles |
ASTM E 2362 : 2022 | Standard Practice for Evaluation of Pre-saturated or Impregnated Towelettes for Hard Surface Disinfection |
ASTM E 2562 : 2022 | Standard Test Method for Quantification of <emph type="bdit">Pseudomonas aeruginosa</emph > Biofilm Grown with High Shear and Continuous Flow using CDC Biofilm Reactor |
ASTM E 3285 : 2022 | Standard Test Method for Evaluation of Contact-Mediated Microbial Transference |
ASTM E 1589 : 2021 | Standard Practice for Evaluation of First Aid Antiseptic Drug Products |
ASTM E 3363 : 2023 | Standard Test Method for Quantitative Performance Evaluation of Antimicrobial Towelettes |
ASTM E 1054 : 2022 | Standard Practices for Evaluation of Inactivators of Antimicrobial Agents |
ASTM E 2613 : 2023 | Standard Practice for Determining the Fungus-Eliminating Effectiveness of Hygienic Handwash and Handrub Agents Using the Fingerpads of Adults |
ASTM E 3178 : 2018 | Standard Practice for Evaluating Static and Cidal Chemical Decontaminants against <emph type="bdit">Bacillus</emph> Spores using Centrifugal Filtration Tubes |
ASTM E 3162 : 2018 | Standard Practice Measuring the Durability of Antibacterial Agents Applied to Textiles under Simulated Home Laundering Conditions |
ASTM E 2755 : 2022 | Standard Test Method for Determining the Bacteria-Eliminating Effectiveness of Healthcare Personnel Hand Rub Formulations Using Hands of Adults |
ASTM E 1883 : 2024 | Standard Practice for Assessment of an Antibacterial Handwash Product by Multiple Basin Wash Technique |
ASTM E 3321 : 2021 | Standard Test Method for Intraluminal Catheter Model used to Evaluate Antimicrobial Urinary Catheters for Prevention of <emph type="ital">Escherichia coli</emph> Biofilm Growth |
ASTM E 3273 : 2021 | Standard Practice to Assess Microbial Decontamination of Indoor Air using an Aerobiology Chamber |
ASTM E 1173 : 2023 | Standard Practice for Evaluation of Preoperative, Precatheterization, or Preinjection Skin Preparations |
ASTM E 2196 : 2023 | Standard Test Method for Quantification of <emph type="bdit">Pseudomonas aeruginosa</emph > Biofilm Grown with Medium Shear and Continuous Flow Using Rotating Disk Reactor |
ASTM E 1482 : 2023 | Standard Practice for Use of Gel Filtration Columns for Cytotoxicity Reduction and Neutralization |
ASTM D 8506 : 2023 | Standard Guide for Microbial Contamination and Biodeterioration in Turbine Oils and Turbine Oil Systems |
ASTM E 3226 : 2019 | Standard Test Method for Processing Cellulose Sponge-wipes to Detect <emph type="ital" >Bacillus anthracis</emph> Spores Sampled from Environmental Surfaces |
ASTM E 3383 : 2024 | Standard Test Method for Determining the Microbial Barrier Properties of Wound Dressing – in vitro Wound Model |
ASTM E 2839 : 2021 | Standard Practice for Production and Storage of Spores of <emph type="bdit">C. difficile</emph > for Use in Efficacy Evaluation of Antimicrobial Agents |
ASTM E 2011 : 2021 | Standard Test Method for Evaluation of Hygienic Handwash and Handrub Formulations for Virus-Eliminating Activity Using the Entire Hand |
ASTM E 3011 : 2022 | Standard Practice for In vitro production of <emph type="ital">Clostridioides difficile</emph > Spores |
ASTM E 1153 : 2022 | Standard Test Method for Efficacy of Sanitizers Recommended for Inanimate, Hard, Nonporous Non-Food Contact Surfaces |
ASTM E 2871 : 2021 | Standard Test Method for Determining Disinfectant Efficacy Against Biofilm Grown in the CDC Biofilm Reactor Using the Single Tube Method |
ASTM E 2180 : 2024 | Standard Test Method for Determining the Activity of Incorporated Antimicrobial Agent(s) In Polymeric or Hydrophobic Materials |
ASTM E 3364 : 2022 | Standard Test Method for Evaluating the Performance of Antimicrobials in or on Polymeric Porous and Nonporous Materials Against Staining by <emph type="ital" >Streptomyces</emph> species (A Pink Stain Organism) |
ASTM E 1174 : 2021 | Standard Test Method for Evaluation of the Effectiveness of Healthcare Personnel Handwash Formulations |
ASTM E 1891 : 2021 | Standard Guide for Determination of a Survival Curve for Antimicrobial Agents Against Selected Microorganisms and Calculation of a D-Value and Concentration Coefficient |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.