ASTM E 2798 : 2011
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Characterization of Performance of Pesticide Spray Drift Reduction Adjuvants for Ground Application
Hardcopy , PDF
18-12-2019
English
01-01-2011
CONTAINED IN VOL. 11.05, 2012 Describes the performance of pesticide spray drift reduction adjuvants with respect to spray droplet size spectra, volume of fines, and other use parameters under simulated field ground application conditions.
Committee |
E 35
|
DocumentType |
Test Method
|
Pages |
6
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy |
1.1 This test method is used to characterize the performance of pesticide spray drift reduction adjuvants with respect to spray droplet size spectra, volume of fines, and other use parameters under simulated field ground application conditions. This test method does not include any procedures to evaluate if pump shear degrades the performance of the spray drift reduction adjuvant.
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
Note 1—This method uses industry-standard units. The following conversions to SI units are provided for convenience: 1 mph = 1.61 kph; 1 in = 2.54 cm; 1 gal/acre = 9.36 L/hectare.
1.3 This test method does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
ASTM E 177 : 2014 : REDLINE | Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods |
ASTM E 1519 : 2010 | Standard Terminology Relating to Agricultural Tank Mix Adjuvants |
ASTM E 1519 : 2013 | Standard Terminology Relating to Agricultural Tank Mix Adjuvants |
ASTM E 1620 : 1997 : R2012 | Standard Terminology Relating to Liquid Particles and Atomization |
ASTM D 3825 : 2009 | Standard Test Method for Dynamic Surface Tension by the Fast-Bubble Technique (Withdrawn 2016) |
ASTM E 1519 : 2016 | Standard Terminology Relating to Agricultural Tank Mix Adjuvants |
ASTM E 1519 : 2015 : REV A | Standard Terminology Relating to Agricultural Tank Mix Adjuvants |
ASTM E 1519 : 2015 | Standard Terminology Relating to Agricultural Tank Mix Adjuvants |
ASTM E 1519 : 2005 | Standard Terminology Relating to Agricultural Tank Mix Adjuvants |
ASTM E 1519 : 2016 : REDLINE | Standard Terminology Relating to Agricultural Tank Mix Adjuvants |
ASTM E 1519 : 2015 : REV B | Standard Terminology Relating to Agricultural Tank Mix Adjuvants |
ASTM E 1260 : 2003 | Standard Test Method for Determining Liquid Drop Size Characteristics in a Spray Using Optical Nonimaging Light-Scattering Instruments |
ASTM E 1620 : 1997 : R2016 | Standard Terminology Relating to Liquid Particles and Atomization |
NFPA 33 : 2016 | SPRAY APPLICATION USING FLAMMABLE OR COMBUSTIBLE MATERIALS |
ASAE S572.1 : 2009(R2013) | SPRAY NOZZLE CLASSIFICATION BY DROPLET SPECTRA |
ASTM E 1620 : 1997 : R2004 | Standard Terminology Relating to Liquid Particles and Atomization |
ASTM E 1260 : 2003 : R2009 | Standard Test Method for Determining Liquid Drop Size Characteristics in a Spray Using Optical Nonimaging Light-Scattering Instruments |
ASTM E 1260 : 2003 : R2015 | Standard Test Method for Determining Liquid Drop Size Characteristics in a Spray Using Optical Nonimaging Light-Scattering Instruments |
ASTM E 1519 : 2004 : REV A | Standard Terminology Relating to Agricultural Tank Mix Adjuvants |
ASTM D 3825 : 1990 : R2005 | Standard Test Method for Dynamic Surface Tension by the Fast-Bubble Technique |
ASTM E 1519 : 2006 : REV A | Standard Terminology Relating to Agricultural Tank Mix Adjuvants |
ASTM E 2408 : 2004 | Standard Test Method for Relative Extensional Viscosity of Agricultural Spray Tank Mixes |
ASTM E 1519 : 2000 | Standard Terminology Relating to Agricultural Tank Mix Adjuvants |
ASTM E 1519 : 2002 : REV A | Standard Terminology Relating to Agricultural Tank Mix Adjuvants |
ASTM E 1519 : 2001 | Standard Terminology Relating to Agricultural Tank Mix Adjuvants |
ASTM E 1519 : 2006 : REV A : EDT 1 | Standard Terminology Relating to Agricultural Tank Mix Adjuvants |
ASTM E 1519 : 2004 | Standard Terminology Relating to Agricultural Tank Mix Adjuvants |
ASTM E 1620 : 1997 | Standard Terminology Relating to Liquid Particles and Atomization |
NFPA 30 : 2018 | FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE |
ASTM E 2408 : 2004 : R2009 | Standard Test Method for Relative Extensional Viscosity of Agricultural Spray Tank Mixes |
ASTM E 1260 : 1995 | Standard Test Method for Determining Liquid Drop Size Characteristics in a Spray Using Optical Nonimaging Light-Scattering Instruments |
ASTM E 1519 : 1999 | Standard Terminology Relating to Agricultural Tank Mix Adjuvants |
ASTM E 1519 : 2003 | Standard Terminology Relating to Agricultural Tank Mix Adjuvants |
ASTM E 2408 : 2004 : R2015 | Standard Test Method for Relative Extensional Viscosity of Agricultural Spray Tank Mixes |
ASTM D 3825 : 1990 : R2000 | Standard Test Method for Dynamic Surface Tension by the Fast-Bubble Technique |
ASTM D 3825 : 1990 : R1995 | Standard Test Method for Dynamic Surface Tension by the Fast-Bubble Technique |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.