ASTM E 2889 : 2012 : R2017
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Control of Respiratory Hazards in the Metal Removal Fluid Environment
Hardcopy , PDF
19-10-2023
English
09-10-2017
CONTAINED IN VOL. 11.03, 2017 Describes guidelines to control respiratory hazards in the metal removal environment.
Committee |
E 34
|
DevelopmentNote |
Supersedes ASTM E 1972. (03/2017)
|
DocumentType |
Standard Practice
|
Pages |
11
|
ProductNote |
Reconfirmed 2017
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This practice sets forth guidelines to control respiratory hazards in the metal removal environment.
1.2This practice does not include prevention of dermatitis, which is the subject of Practice E2693, but it does adopt a similar systems management approach with many control elements in common.
1.3This practice focuses on employee exposure via inhalation of metal removal fluids and associated airborne agents.
1.4Metal removal fluids used for wet machining operations (such as cutting, drilling, milling, or grinding) that remove metal to produce the finished part are a subset of metalworking fluids. This practice does not apply to other operations (such as stamping, rolling, forging, or casting) that use metalworking fluids other than metal removal fluids. These other types of metalworking fluid operations are not included in this document because of limited information on health effects, including epidemiology studies, and on control technologies. Nonetheless, some of the exposure control approaches and guidance contained in this document may be useful for managing respiratory hazards associated with other types of metalworking fluids.
1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM E 1497 : 2023 | Standard Practice for Selection and Safe Use of Water-Miscible and Straight Oil Metal Removal Fluids |
ASTM E 2148 : 2016 | Standard Guide for Using Documents Related to Metalworking or Metal Removal Fluid Health and Safety |
ASTM E 1497 : 2017 | Standard Practice for Selection and Safe Use of Water-Miscible and Straight Oil Metal Removal Fluids |
ASTM E 2693 : 2014 | Standard Practice for Prevention of Dermatitis in the Wet Metal Removal Fluid Environment |
ASTM E 2275 : 2014 | Standard Practice for Evaluating Water-Miscible Metalworking Fluid Bioresistance and Antimicrobial Pesticide Performance |
ASTM E 1497 : 2023 | Standard Practice for Selection and Safe Use of Water-Miscible and Straight Oil Metal Removal Fluids |
ASTM E 2523 : 2007 | Standard Terminology for Metalworking Fluids and Operations |
ASTM E 1972 : 1998 | Standard Practice for Minimizing Effects of Aerosols in the Wet Metal Removal Environment |
ASTM E 2169 : 2001 | Standard Practice for Selecting Antimicrobial Pesticides for Use in Water-Miscible Metalworking Fluids |
ASTM E 1370 : 2014 : REDLINE | Standard Guide for Air Sampling Strategies for Worker and Workplace Protection |
ASTM E 2694 : 2016 : REDLINE | Standard Test Method for Measurement of Adenosine Triphosphate in Water-Miscible Metalworking Fluids |
ASTM E 2275 : 2003 | Standard Practice for Evaluating Water-Miscible Metalworking Fluid Bioresistance and Antimicrobial Pesticide Performance |
ASTM E 1542 : 2010 | Standard Terminology Relating to Occupational Health and Safety |
ASTM E 1972 : 2004 | Standard Practice for Minimizing Effects of Aerosols in the Wet Metal Removal Environment |
ANSI B11 TR2 : 1997 | MIST CONTROL CONSIDERATIONS FOR THE DESIGN, INSTALLATION, AND USE OF MACHINE TOOLS USING METALWORKING FLUIDS |
ASTM E 1542 : 1993 : R2004 | Standard Terminology Relating to Occupational Health and Safety |
ASTM E 2564 : 2018 | Standard Practice for Enumeration of <emph type="bdit">Mycobacteria</emph> in Metalworking Fluids by Direct Microscopic Counting (DMC) Method |
ASTM D 1356 : 2015 | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
ASTM E 2144 : 2021 | Standard Practice for Personal Sampling and Analysis of Endotoxin in Metalworking Fluid Aerosols in Workplace Atmospheres |
ASTM E 1497 : 2000 | Standard Practice for Safe Use of Water-Miscible Metal Removal Fluids |
CFR 29(PTS1900-1910) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
ASTM E 2693 : 2014 : REDLINE | Standard Practice for Prevention of Dermatitis in the Wet Metal Removal Fluid Environment |
ASTM E 2523 : 2013 : R2018 | Standard Terminology for Metalworking Fluids and Operations |
ASTM E 1542 : 2021 | Standard Terminology Relating to Occupational Health and Safety |
ASTM E 1370 : 1996 | Standard Guide for Air Sampling Strategies for Worker and Workplace Protection |
ASTM E 2144 : 2001 : R2007 | Standard Practice for Personal Sampling and Analysis of Endotoxin in Metalworking Fluid Aerosols in Workplace Atmospheres |
ASTM E 1542 : 2020 : REV A | Standard Terminology Relating to Occupational Health and Safety |
ASTM D 7049 : 2017 | Standard Test Method for Metalworking Fluid Aerosol in Workplace Atmospheres |
ASTM E 2148 : 2011 : REV A | Standard Guide for Using Documents Related to Metalworking or Metal Removal Fluid Health and Safety |
ASTM D 1356 : 2017 | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
ASTM E 2694 : 2011 | Standard Test Method for Measurement of Adenosine Triphosphate in Water-Miscible Metalworking Fluids |
ASTM E 2694 : 2009 | Standard Test Method for Measurement of Adenosine Triphosphate in Water-Miscible Metalworking Fluids |
ASTM E 2563 : 2007 | Standard Test Method for Enumeration of Non-Tuberculosis Mycobacteria in Aqueous Metalworking Fluids by Plate Count Method |
ASTM E 2564 : 2013 | Standard Practice for Enumeration of <emph type="ital">Mycobacteria</emph> in Metalworking Fluids by Direct Microscopic Counting (DMC) Method |
ASTM E 2148 : 2006 | Standard Guide for Using Documents Related to Metalworking or Metal Removal Fluid Health and Safety |
ASTM E 1972 : 2004 : R2011 | Standard Practice for Minimizing Effects of Aerosols in the Wet Metal Removal Environment (Withdrawn 2017) |
ASTM E 2693 : 2014 | Standard Practice for Prevention of Dermatitis in the Wet Metal Removal Fluid Environment |
ASTM E 1497 : 2005 : R2011 | Standard Practice for Safe Use of Water-Miscible Metal Removal Fluids |
ASTM E 1370 : 1996 : R2002 | Standard Guide for Air Sampling Strategies for Worker and Workplace Protection |
ASTM E 1302 : 2012 | Standard Guide for Acute Animal Toxicity Testing of Water-Miscible Metalworking Fluids |
ASTM E 2275 : 2019 | Standard Practice for Evaluating Water-Miscible Metalworking Fluid Bioresistance and Antimicrobial Pesticide Performance |
ASTM E 2564 : 2007 | Standard Test Method for Enumeration of <i>Mycobacteria</i> in Metalworking Fluids by Direct Microscopic Counting (DMC) Method |
ASTM E 1302 : 2013 : R2017 | Standard Guide for Acute Animal Toxicity Testing of Water-Miscible Metalworking Fluids |
ASTM E 2657 : 2016 | Standard Practice for Determination of Endotoxin Concentrations in Water-Miscible Metalworking Fluids |
ASTM D 1356 : 2015 : REV B | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
ASTM E 2148 : 2001 | Standard Guide for Using Documents Related to Metalworking or Metal Removal Fluid Health and Safety |
ASTM D 2881 : 2012 : R2014 | Standard Classification for Metalworking Fluids and Related Materials |
ASTM E 2563 : 2013 | Standard Practice for Enumeration of Non-Tuberculosis <emph type="ital">Mycobacteria</emph > in Aqueous Metalworking Fluids by Plate Count Method |
ASTM E 1497 : 2017 : REDLINE | Standard Practice for Selection and Safe Use of Water-Miscible and Straight Oil Metal Removal Fluids |
ASTM D 2881 : 2003 | Standard Classification for Metal Working Fluids and Related Materials |
ASTM E 2144 : 2001 | Standard Practice for Personal Sampling and Analysis of Endotoxin in Metalworking Fluid Aerosols in Workplace Atmospheres |
ASTM E 1542 : 2020 : REV B | Standard Terminology Relating to Occupational Health and Safety |
ASTM D 1356 : 2014 : REV A | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
CFR 40(PTS150-189) : JUL 2017 | PROTECTION OF ENVIRONMENT - ENVIRONMENTAL PROTECTION AGENCY |
ASTM E 1370 : 2014 | Standard Guide for Air Sampling Strategies for Worker and Workplace Protection |
ASTM E 1497 : 2005 | Standard Practice for Safe Use of Water-Miscible Metal Removal Fluids |
ASTM D 2881 : 2003 : R2009 | Standard Classification for Metal Working Fluids and Related Materials |
ASTM E 2657 : 2011 | Standard Test Method for Determination of Endotoxin Concentrations in Water-Miscible Metalworking Fluids |
ASTM E 2144 : 2011 : R2016 | Standard Practice for Personal Sampling and Analysis of Endotoxin in Metalworking Fluid Aerosols in Workplace Atmospheres |
ASTM E 2169 : 2017 : REDLINE | Standard Practice for Selecting Antimicrobial Pesticides for Use in Water-Miscible Metalworking Fluids |
ASTM D 7049 : 2017 : REDLINE | Standard Test Method for Metalworking Fluid Aerosol in Workplace Atmospheres |
ASTM E 1302 : 2023 | Standard Guide for Acute Animal Toxicity Testing of Water-Miscible Metalworking Fluids |
ASTM D 2881 : 2012 | Standard Classification for Metalworking Fluids and Related Materials |
ASTM E 2523 : 2006 | Standard Terminology for Metalworking Fluids and Operations |
ASTM E 2523 : 2011 | Standard Terminology for Metalworking Fluids and Operations |
ASTM E 2693 : 2009 | Standard Practice for Prevention of Dermatitis in the Wet Metal Removal Fluid Environment |
ASTM E 2694 : 2016 | Standard Test Method for Measurement of Adenosine Triphosphate in Water-Miscible Metalworking Fluids |
ASTM E 1542 : 2020 | Standard Terminology Relating to Occupational Health and Safety |
ASTM E 1542 : 2018 | Standard Terminology Relating to Occupational Health and Safety |
ASTM D 1356 : 2015 : REV A | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
CFR 29(PT1910.1000 TO END) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
ASTM D 1356 : 2005 : R2010 | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
ASTM E 1302 : 2000 | Standard Guide for Acute Animal Toxicity Testing of Water-Miscible Metalworking Fluids |
ASTM E 1542 : 1993 : R1998 | Standard Terminology Relating to Occupational Health and Safety |
ASTM D 2881 : 2019 | Standard Classification for Metalworking Fluids and Related Materials |
ASTM E 1497 : 2017 | Standard Practice for Selection and Safe Use of Water-Miscible and Straight Oil Metal Removal Fluids |
ASTM E 2693 : 2019 | Standard Practice for Prevention of Dermatitis in the Wet Metal Removal Fluid Environment |
ASTM E 2148 : 2003 | Standard Guide for Using Documents Related to Metalworking or Metal Removal Fluid Health and Safety |
ASTM D 1356 : 2020 | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
ASTM E 2275 : 2014 : REDLINE | Standard Practice for Evaluating Water-Miscible Metalworking Fluid Bioresistance and Antimicrobial Pesticide Performance |
ASTM D 1356 : 2000 : REV A | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
ASTM E 2275 : 2003 : R2008 | Standard Practice for Evaluating Water-Miscible Metalworking Fluid Bioresistance and Antimicrobial Pesticide Performance |
ASTM E 2657 : 2021 | Standard Practice for Determination of Endotoxin Concentrations in Water-Miscible Metalworking Fluids |
ASTM E 2694 : 2021 | Standard Test Method for Measurement of Adenosine Triphosphate in Water-Miscible Metalworking Fluids |
ASTM E 2169 : 2022 | Standard Practice for Selecting Antimicrobial Pesticides for Use in Water-Miscible Metalworking Fluids |
ASTM E 2275 : 2013 | Standard Practice for Evaluating Water-Miscible Metalworking Fluid Bioresistance and Antimicrobial Pesticide Performance |
ASTM D 1356 : 2014 : REV B | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
ASTM D 1356 : 2014 | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
ASTM E 1370 : 1996 : R2008 | Standard Guide for Air Sampling Strategies for Worker and Workplace Protection |
ASTM E 1302 : 2000 : R2007 | Standard Guide for Acute Animal Toxicity Testing of Water-Miscible Metalworking Fluids |
ASTM E 1370 : 2021 | Standard Guide for Air Sampling Strategies for Worker and Workplace Protection |
ASTM E 2657 : 2009 | Standard Test Method for Determination of Endotoxin Concentrations in Water-Miscible Metalworking Fluids |
ASTM E 2169 : 2017 | Standard Practice for Selecting Antimicrobial Pesticides for Use in Water-Miscible Metalworking Fluids |
ASTM E 2563 : 2018 | Standard Practice for Enumeration of Non-Tuberculosis <emph type="bdit">Mycobacteria</emph > in Aqueous Metalworking Fluids by Plate Count Method |
ASTM E 2275 : 2003 : EDT 1 | Standard Practice for Evaluating Water-Miscible Metalworking Fluid Bioresistance and Antimicrobial Pesticide Performance |
ASTM E 2148 : 2016 | Standard Guide for Using Documents Related to Metalworking or Metal Removal Fluid Health and Safety |
ASTM E 2148 : 2011 : REV B | Standard Guide for Using Documents Related to Metalworking or Metal Removal Fluid Health and Safety |
ASTM E 1302 : 2013 | Standard Guide for Acute Animal Toxicity Testing of Water-Miscible Metalworking Fluids |
ASTM D 1356 : 2005 | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
ASTM D 2881 : 1973 : R1983 | Classification of Metal Working Fluids and Related Materials (Withdrawn 1990) |
ASTM E 2144 : 2011 | Standard Practice for Personal Sampling and Analysis of Endotoxin in Metalworking Fluid Aerosols in Workplace Atmospheres |
ASTM E 2169 : 2001 : R2007 | Standard Practice for Selecting Antimicrobial Pesticides for Use in Water-Miscible Metalworking Fluids |
ASTM E 2148 : 2016 : REDLINE | Standard Guide for Using Documents Related to Metalworking or Metal Removal Fluid Health and Safety |
ASTM E 2523 : 2013 | Standard Terminology for Metalworking Fluids and Operations |
ASTM E 2564 : 2011 | Standard Test Method for Enumeration of <i>Mycobacteria</i> in Metalworking Fluids by Direct Microscopic Counting (DMC) Method |
ASTM E 2169 : 2012 | Standard Practice for Selecting Antimicrobial Pesticides for Use in Water-Miscible Metalworking Fluids |
ASTM E 2275 : 2014 | Standard Practice for Evaluating Water-Miscible Metalworking Fluid Bioresistance and Antimicrobial Pesticide Performance |
ASTM D 7049 : 2004 | Standard Test Method for Metal Removal Fluid Aerosol in Workplace Atmospheres |
ASTM E 2657 : 2016 : REDLINE | Standard Practice for Determination of Endotoxin Concentrations in Water-Miscible Metalworking Fluids |
ASTM E 2148 : 2021 | Standard Guide for Using Documents Related to Metalworking or Metal Removal Fluid Health and Safety |
ASTM D 7049 : 2004 : R2010 | Standard Test Method for Metal Removal Fluid Aerosol in Workplace Atmospheres |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.