ASTM E 2910 : 2012 : R2018
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Guide for Preferred Methods for Acceptance of Product
Hardcopy , PDF
18-10-2024
English
01-04-2018
Committee |
E 11
|
DocumentType |
Guide
|
Pages |
11
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This guide establishes lot or batch and continuous sampling plans using MIL-STD-1916 as a basis. It represents an alternative sampling approach to attributes sampling (MIL-STD-105E, same as Practice E2234), variables sampling (MIL-STD-414, Practice E2762), and continuous sampling (MIL-STD-1235B, Practice E2819).
1.2This guide provides the sampling plans of MIL-STD-1916 in ASTM format for use by ASTM committees and others. It recognizes the continuing usage of MIL-STD-1916 in industries supported by ASTM. Most of the original text in MIL-STD-1916 is preserved in Sections 4 – 6 of this guide. The original wording of “Government” in MIL-STD-1916 has been changed to “consumer”, and “contractor” has been changed to “producer” to make this standard more generic.
1.3Purpose—To encourage producers supplying goods and services to its consumers to submit efficient and effective process control (prevention) procedures in place of prescribed sampling requirements. The goal is to support the movement away from an AQL-based inspection (detection) strategy to implementation of an effective prevention-based strategy including a comprehensive quality system, continuous improvement and a partnership with the consumer. The underlying theme is a partnership between consumer and the producer, with the requisite competence of both parties, and a clear mutual benefit from processes capable of consistently high quality products and services. The objective is to create an atmosphere where every noncompliance is an opportunity for corrective action and improvement rather than one where acceptable quality levels are the contractually sufficient goals.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM F 3303 : 2018 | Standard for Additive Manufacturing – Process Characteristics and Performance: Practice for Metal Powder Bed Fusion Process to Meet Critical Applications |
ASTM E 2819 : 2011 : R2015 | Standard Practice for Single- and Multi-Level Continuous Sampling of a Stream of Product by Attributes Indexed by AQL |
ASTM E 456 : 2002 | Standard Terminology for Relating to Quality and Statistics |
ASTM E 2234 : 2008 | Standard Practice for Sampling a Stream of Product by Attributes Indexedby AQL |
ASTM E 456 : 2013 : REV A : R2022 | Standard Terminology Relating to Quality and Statistics |
ASTM E 2234 : 2005 | Standard Practice for Sampling a Stream of Product by Attributes Indexedby AQL |
ASTM E 456 : 2013 : REV A : R2022 : EDT 1 | Standard Terminology Relating to Quality and Statistics |
ASTM E 2762 : 2010 : R2020 | Standard Practice for Sampling a Stream of Product by Variables Indexed by AQL |
ASTM E 2819 : 2011 : R2021 | Standard Practice for Single- and Multi-Level Continuous Sampling of a Stream of Product by Attributes Indexed by AQL |
ASTM E 456 : 2013 : REV A : R2017 : EDT 5 | Standard Terminology Relating to Quality and Statistics |
ASTM E 2762 : 2010 | Standard Practice for Sampling a Stream of Product by Variables Indexed by AQL |
ASTM E 2234 : 2009 : R2013 | Standard Practice for Sampling a Stream of Product by Attributes Indexed by AQL |
ASTM E 2819 : 2011 | Standard Practice for Single- and Multi-Level Continuous Sampling of a Stream of Product by Attributes Indexed by AQL |
ASTM E 2234 : 2009 : R2018 | Standard Practice for Sampling a Stream of Product by Attributes Indexed by AQL |
ASTM E 2234 : 2009 : R2023 | Standard Practice for Sampling a Stream of Product by Attributes Indexed by AQL |
ASTM E 456 : 2013 : REV A : R2017 : EDT 4 | Standard Terminology Relating to Quality and Statistics |
ASTM E 456 : 2013 : REV A : R2017 : EDT 6 | Standard Terminology Relating to Quality and Statistics |
ASTM E 2762 : 2010 : R2014 | Standard Practice for Sampling a Stream of Product by Variables Indexed by AQL |
ASTM E 2234 : 2009 | Standard Practice for Sampling a Stream of Product by Attributes Indexedby AQL |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.