ASTM E 340 : 2023
Current
The latest, up-to-date edition.
Standard Practice for Macroetching Metals and Alloys
Hardcopy , PDF
English
21-11-2023
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
E 04
|
| DocumentType |
Standard Practice
|
| Pages |
11
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1These procedures describe the methods of macroetching metals and alloys to reveal their macrostructure.
1.2The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to the International System (SI) units that are provided for information only and are not considered standard.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
For specific warning statements, see 6.2, 7.1, 8.1.3, 8.2.1, 8.8.3, 8.10.1.1, and 8.13.2. It is further recommended to review the guidance in Guide E2014.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM F 788/F788M : 2020 : EDT 1 | Standard Specification for Surface Discontinuities of Bolts, Screws, Studs, and Rivets, Inch and Metric Series |
| ASTM A 703/A703M : 2020 : REV A | Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts |
| ASTM A 668/A668M : 2023 | Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use |
| ASTM A 988/A988M : 2023 | Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service |
| ASTM E 381 : 2022 | Standard Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings |
| ASTM F 3160 : 2021 | Standard Guide for Metallurgical Characterization of Absorbable Metallic Materials for Medical Implants |
| ASTM E 2014 : 2017 | Standard Guide on Metallographic Laboratory Safety |
| ASTM E 1077 : 2014 : R2021 | Standard Test Methods for Estimating the Depth of Decarburization of Steel Specimens |
| ASTM A 957/A957M : 2021 | Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use |
| ASTM A 781/A781M : 2021 | Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use |
| ASTM A 182/A182M : 2023 | Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service |
| ASTM A 985/A985M : 2021 | Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts |
| ASTM A 872/A872M : 2021 | Standard Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments |
| ASTM A 608/A608M : 2020 | Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures |
| ASTM A 778/A778M : 2022 | Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products |
| ASTM A 989/A989M : 2023 | Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service |
| ASTM F 541 : 2012 : R2020 | Standard Specification for Alloy Steel Eyebolts |
| ASTM A 983/A983M : 2006 : R2021 | Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines |
| ASTM E 1180 : 2008 : R2021 | Standard Practice for Preparing Sulfur Prints for Macrostructural Evaluation |
| ANSI/AWWA C220:2023 | Stainless-Steel Pipe, 1/2 In. (13 mm) and Larger |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.