• Shopping Cart
    There are no items in your cart

ASTM E 350 : 2023

Current

Current

The latest, up-to-date edition.

Standard Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

19-12-2023

€94.22
Excluding VAT

Committee
E 01
DocumentType
Test Method
Pages
64
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

1.1These test methods cover the chemical analysis of carbon steels, low-alloy steels, silicon electrical steels, ingot iron, and wrought iron having chemical compositions within the following limits:

Element

 Composition Range, %

Aluminum

0.001  to 1.50

Antimony

0.002  to 0.03

Arsenic

0.0005 to 0.10

Bismuth

0.005  to 0.50

Boron

0.0005 to 0.02

Calcium

0.0005 to 0.01

Cerium

0.005  to 0.50

Chromium

0.005  to 3.99

Cobalt

0.01   to 0.30

Columbium (Niobium)

0.002  to 0.20

Copper

0.005  to 1.50

Lanthanum

0.001  to 0.30

Lead

0.001  to 0.50

Manganese

0.01   to 2.50

Molybdenum

0.002  to 1.50

Nickel

0.005  to 5.00

Nitrogen

0.0005 to 0.04

Oxygen

0.0001 to 0.03

Phosphorus

0.001  to 0.25

Selenium

0.001  to 0.50

Silicon

0.001  to 5.00

Sulfur

0.001  to 0.60

Tin

0.002  to 0.10

Titanium

0.002  to 0.60

Tungsten

0.005  to 0.10

Vanadium

0.005  to 0.50

Zirconium

0.005  to 0.15

1.2The test methods in this standard are contained in the sections indicated as follows:

Sections

Aluminum, Total, by the 8-Quinolinol Gravimetric
 Method (0.20 % to 1.5 %)

124131

Aluminum, Total, by the 8-Quinolinol
 Spectrophotometric Method
 (0.003 % to 0.20 %)

7686

Aluminum, Total or Acid-Soluble, by the Atomic
 Absorption Spectrometry Method
 (0.005 % to 0.20 %)

308317

Antimony by the Brilliant Green Spectrophotometric
 Method (0.0002 % to 0.030 %)

142151

Bismuth by the Atomic Absorption Spectrometry
 Method (0.02 % to 0.25 %)

298307

Boron by the Distillation-Curcumin
 Spectrophotometric Method
 (0.0003 % to 0.006 %)

208219

Calcium by the Direct-Current Plasma Atomic
 Emission Spectrometry Method
 (0.0005 % to 0.010 %)

289297

Carbon, Total, by the Combustion Gravimetric Method
 (0.05 % to 1.80 %)—Discontinued 1995

Cerium and Lanthanum by the Direct Current Plasma
 Atomic Emission Spectrometry Method
 (0.003 % to 0.50 % Cerium, 0.001 % to 0.30 %
 Lanthanum)

249257

Chromium by the Atomic Absorption Spectrometry
 Method (0.006 % to 1.00 %)

220229

Chromium by the Peroxydisulfate Oxidation-Titration
 Method (0.05 % to 3.99 %)

230238

Cobalt by the Nitroso-R Salt Spectrophotometric
 Method (0.01 % to 0.30 %)

5362

Copper by the Sulfide Precipitation-Iodometric
 Titration Method (Discontinued 1989)

8794

Copper by the Atomic Absorption Spectrometry
 Method (0.004 % to 0.5 %)

279288

Copper by the Neocuproine Spectrophotometric
 Method (0.005 % to 1.50 %)

114123

Lead by the Ion-Exchange—Atomic Absorption
 Spectrometry Method
 (0.001 % to 0.50 %)

132141

Manganese by the Atomic Absorption Spectrometry
 Method (0.005 % to 2.0 %)

269278

Manganese by the Metaperiodate Spectrophotometric
 Method (0.01 % to 2.5 %)

918

Manganese by the Peroxydisulfate-Arsenite Titrimetric
 Method (0.10 % to 2.50 %)

164171

Molybdenum by the Thiocyanate Spectrophotometric
 Method (0.01 % to 1.50 %)

152163

Nickel by the Atomic Absorption Spectrometry
 Method (0.003 % to 0.5 %)

318327

Nickel by the Dimethylglyoxime Gravimetric
 Method (0.1 % to 5.00 %)

180187

Nickel by the Ion-Exchange-Atomic-Absorption
 Spectrometry Method
 (0.005 % to 1.00 %)

188197

Nitrogen by the Distillation-Spectrophotometric
 Method (Discontinued 1988)

6375

Phosphorus by the Alkalimetric Method
 (0.02 % to 0.25 %)

172179

Phosphorus by the Molybdenum Blue
 Spectrophotometric Method
 (0.003 % to 0.09 %)

1930

Silicon by the Molybdenum Blue Spectrophotometric
 Method (0.01 % to 0.06 %)

103113

Silicon by the Gravimetric Titration
 Method (0.05 % to 3.5 %)

4652

Sulfur by the Gravimetric Method
 (Discontinued 1988)

3136

Sulfur by the Combustion-Iodate Titration Method
 (0.005 % to 0.3 %) (Discontinued 2017)

3745

Tin by the Sulfide Precipitation-Iodometric Titration
 Method (0.01 % to 0.1 %)

95102

Tin by the Solvent Extraction-Atomic Absorption
 Spectrometry Method
 (0.002 % to 0.10 %)

198207

Titanium by the Diantipyrylmethane
 Spectrophotometric Method
 (0.025 % to 0.30 %)

258268

Vanadium by the Atomic Absorption Spectrometry
 Method (0.006 % to 0.15 %)

239248

1.3Test methods for the determination of several elements not included in this standard can be found in Test Methods E1019.

1.4Some of the composition ranges given in 1.1 are too broad to be covered by a single test method and therefore this standard contains multiple test methods for some elements. The user must select the proper test method by matching the information given in the Scope and Interference sections of each test method with the composition of the alloy to be analyzed.

1.5The values stated in SI units are to be regarded as standard. In some cases, exceptions allowed in IEEE/ASTM SI 10 are also used.

1.6This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific hazards statements are given in Section 6 and in special “Warning” paragraphs throughout these test methods.

1.7This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM B 848/B848M : 2021 Standard Specification for Powder Forged (PF) Ferrous Materials
ASTM A 532/A532M : 2010 : R2023 Standard Specification for Abrasion-Resistant Cast Irons
ASTM E 415 : 2021 Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry
ASTM E 1282 : 2021 Standard Guide for Specifying the Chemical Compositions and Selecting Sampling Practices and Quantitative Analysis Methods for Metals, Ores, and Related Materials
ASTM E 1077 : 2014 : R2021 Standard Test Methods for Estimating the Depth of Decarburization of Steel Specimens
ASTM E 1473 : 2022 Standard Test Methods for Chemical Analysis of Nickel, Cobalt, and High-Temperature Alloys
ASTM E 2093 : 2012 : R2016 Standard Guide for Optimizing, Controlling and Assessing Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization
ASTM B 883 : 2019 Standard Specification for Metal Injection Molded (MIM) Materials
ASTM G 81 : 1997 : REV A : R2018 Standard Test Method for Jaw Crusher Gouging Abrasion Test
ASTM A 751 : 2021 Standard Test Methods and Practices for Chemical Analysis of Steel Products
ASTM C 114 : 2023 Standard Test Methods for Chemical Analysis of Hydraulic Cement
ASTM E 351 : 2018 Standard Test Methods for Chemical Analysis of Cast Iron—All Types
ASTM D 3724 : 2001(R2019) Standard Specification for Synthetic Brown Iron Oxide Pigment
ASTM A 518/A518M : 1999 : R2022 Standard Specification for Corrosion-Resistant High-Silicon Iron Castings
ASTM E 701 : 1980 : R2018 Standard Test Methods for Municipal Ferrous Scrap
ASTM C 1797 : 2023 : REV A Standard Specification for Ground Calcium Carbonate and Aggregate Mineral Fillers for use in Hydraulic Cement Concrete
ASTM A 861 : 2004 : R2023 Standard Specification for High-Silicon Iron Pipe and Fittings
ASTM F 3042 : 2013 : R2018 Standard Specification for Nonferrous Hex Socket, Slotted Headless, and Square Head Set Screws
ASTM A 713 : 2004 : R2017 Standard Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components
ASTM B 599 : 2020 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Niobium Stabilized Alloy Plate, Sheet, and Strip
ASTM E 354 : 2021 : EDT 1 Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys
ASTM E 353 : 2019 : EDT 1 Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys
ASTM B 564 : 2022 Standard Specification for Nickel Alloy Forgings

ASTM E 135 : 2024 Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
ASTM E 1019 : 2018 Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Inert Gas Fusion Techniques
ASTM E 135 : 2023 : REV A Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
ASTM E 1019 : 2024 Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Combustion and Inert Gas Fusion Techniques
ASTM E 50 : 2017 Standard Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials
ASTM E 50 : 2024 Standard Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials
ASTM E 352 : 2023 Standard Test Methods for Chemical Analysis of Tool Steels and Other Similar Medium- and High-Alloy Steels

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.