ASTM E 407 : 2023
Current
Current
The latest, up-to-date edition.
Standard Practice for Microetching Metals and Alloys
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
21-11-2023
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
E 04
|
| DocumentType |
Standard Practice
|
| Pages |
22
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This practice covers chemical solutions and procedures to be used in etching metals and alloys for microscopic examination. Safety precautions and miscellaneous information are also included.
1.2This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific cautionary statements, see 6.1 and Table 2.
1.3This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM G 110 : 1992 : R2022 : EDT 2 | Standard Practice for Evaluating Intergranular Corrosion Resistance of Heat Treatable Aluminum Alloys by Immersion in Sodium Chloride + Hydrogen Peroxide Solution |
| ASTM F 3554 : 2022 | Standard Specification for Additive Manufacturing – Finished Part Properties – Grade 4340 (UNS G43400) via Laser Beam Powder Bed Fusion for Transportation Applications |
| ASTM F 75 : 2023 | Standard Specification for Cobalt-28 Chromium-6 Molybdenum Alloy Castings and Casting Alloy for Surgical Implants (UNS R30075) |
| ASTM E 1558 : 2009 : R2021 | Standard Guide for Electrolytic Polishing of Metallographic Specimens |
| ASTM F 2886 : 2017 : R2023 | Standard Specification for Metal Injection Molded Cobalt-28Chromium-6Molybdenum Components for Surgical Implant Applications |
| ASTM F 1108 : 2021 | Standard Specification for Titanium-6Aluminum-4Vanadium Alloy Castings for Surgical Implants (UNS R56406) |
| ASTM E 2014 : 2017 | Standard Guide on Metallographic Laboratory Safety |
| ASTM E 1077 : 2014 : R2021 | Standard Test Methods for Estimating the Depth of Decarburization of Steel Specimens |
| ASTM E 1181 : 2002 : R2023 | Standard Test Methods for Characterizing Duplex Grain Sizes |
| ASTM F 561 : 2019 | Standard Practice for Retrieval and Analysis of Medical Devices, and Associated Tissues and Fluids |
| ASTM F 3056 : 2014 : R2021 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion |
| ASTM E 112 : 2013 : R2021 | Standard Test Methods for Determining Average Grain Size |
| ASTM A 1033 : 2018 : R2023 | Standard Practice for Quantitative Measurement and Reporting of Hypoeutectoid Carbon and Low-Alloy Steel Phase Transformations |
| ASTM E 562 : 2019 : EDT 1 | Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count |
| ASTM E 1382 : 1997 : R2023 | Standard Test Methods for Determining Average Grain Size Using Semiautomatic and Automatic Image Analysis |
| ASTM F 2885 : 2017 : R2023 | Standard Specification for Metal Injection Molded Titanium-6Aluminum-4Vanadium Components for Surgical Implant Applications |
| ASTM F 3213 : 2017 | Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Cobalt-28 Chromium-6 Molybdenum via Powder Bed Fusion |
| ASTM F 3318 : 2018 | Standard for Additive Manufacturing – Finished Part Properties – Specification for AlSi10Mg with Powder Bed Fusion – Laser Beam |
| ASTM F 2282 : 2023 | Standard Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners |
| ASTM E 930 : 2018 | Standard Test Methods for Estimating the Largest Grain Observed in a Metallographic Section (ALA Grain Size) |
| ASTM F 2229 : 2021 | Standard Specification for Wrought, Nitrogen Strengthened 23Manganese-21Chromium-1Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29108) |
| ASTM F 138 : 2019 | Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Bar and Wire for Surgical Implants (UNS S31673) |
| ASTM F 2581 : 2012 : R2017 | Standard Specification for Wrought Nitrogen Strengthened 11Manganese-17Chromium-3Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29225) |
| ASTM F 3160 : 2021 | Standard Guide for Metallurgical Characterization of Absorbable Metallic Materials for Medical Implants |
| ASTM B 777 : 2015 : R2020 | Standard Specification for Tungsten Base, High-Density Metal |
| ASTM F 1314 : 2018 | Standard Specification for Wrought Nitrogen Strengthened 22 Chromium–13 Nickel–5 Manganese–2.5 Molybdenum Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S20910) |
| ASTM F 3055 : 2014 : REV A : R2021 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion |
| ASTM F 2924 : 2014 : R2021 | Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion |
| ASTM F 3184 : 2016 | Standard Specification for Additive Manufacturing Stainless Steel Alloy (UNS S31603) with Powder Bed Fusion |
| ASTM F 3001 : 2014 : R2021 | Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium ELI (Extra Low Interstitial) with Powder Bed Fusion |
| ASTM F 139 : 2019 | Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Sheet and Strip for Surgical Implants (UNS S31673) |
| ASTM F 3607 : 2022 | Standard Specification for Additive Manufacturing – Finished Part Properties – Maraging Steel via Powder Bed Fusion |
| ASTM B 931 : 2023 | Standard Test Method for Metallographically Estimating the Observed Case Depth of Ferrous Powder Metallurgy (PM) Parts |
| ASTM A 892 : 2009 : R2020 | Standard Guide for Defining and Rating the Microstructure of High Carbon Bearing Steels |
| ASTM E 1351 : 2001 : R2020 | Standard Practice for Production and Evaluation of Field Metallographic Replicas |
| ASTM F 2989 : 2021 | Standard Specification for Metal Injection Molded Unalloyed Titanium Components for Surgical Implant Applications |
| ASTM F 3302 : 2018 | Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Titanium Alloys via Powder Bed Fusion |
| ASTM E 1180 : 2008 : R2021 | Standard Practice for Preparing Sulfur Prints for Macrostructural Evaluation |
| ASTM E 1268 : 2019 | Standard Practice for Assessing the Degree of Banding or Orientation of Microstructures |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.