ASTM E 536 : 2016
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Methods for Chemical Analysis of Zinc and Zinc Alloys
Hardcopy , PDF
12-07-2023
English
01-04-2016
These test methods cover the chemical analysis of zinc and zinc alloys having chemical compositions within the limits of Table 1.
Committee |
E 01
|
DocumentType |
Test Method
|
Pages |
6
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1These test methods cover the chemical analysis of zinc and zinc alloys having chemical compositions within the limits of Table 1.
1.2The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.3These test methods appear as follows:
Sections | |
Aluminum by the EDTA Titrimetric Method (0.5 to 4.5 %) | 10 – 17 |
Aluminum, Cadmium, Copper, Iron, Lead, and Magnesium | 18 – 28 |
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in Section 6.
ASTM B 6 : 2023 | Standard Specification for Zinc |
ASTM B 69 : 2021 | Standard Specification for Rolled Zinc |
ASTM B 418 : 2016 : REV A : R2021 | Standard Specification for Cast and Wrought Galvanic Zinc Anodes |
ASTM B 792 : 2016 : R2021 | Standard Specification for Zinc Alloys in Ingot Form for Slush Casting |
ASTM A 817 : 2012 : R2017 | Standard Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire |
ASTM F 3160 : 2021 | Standard Guide for Metallurgical Characterization of Absorbable Metallic Materials for Medical Implants |
ASTM B 997 : 2016 : R2021 | Standard Specification for Zinc-Aluminum Alloys in Ingot Form for Hot-Dip Coatings |
ASTM B 1022 : 2022 | Standard Specification for Zinc-Aluminum-Magnesium Alloys in Ingot Form for Coating Steel Sheet by the Hot-Dip Process |
ASTM B 327 : 2021 | Standard Specification for Master Alloys Used in Making Zinc Die Casting Alloys |
ASTM B 1013 : 2022 | Standard Specification for High Fluidity (HF) Zinc-Aluminum Alloy Thin Wall Die Castings |
ASTM B 793 : 2016 : R2021 | Standard Specification for Zinc Casting Alloy Ingot for Sheet Metal Forming Dies and Plastic Injection Molds |
ASTM B 960 : 2018 : R2022 | Standard Specification for Prime Western Grade-Recycled (PWG-R) Zinc |
ASTM B 86 : 2022 | Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloy Foundry and Die Castings |
ASTM B 240 : 2022 | Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloys in Ingot Form for Foundry and Die Castings |
ASTM B 952/B952M : 2019 | Standard Specification for Zinc Alloys in Ingot Form for Spin Casting |
ASTM F 1182 : 2007 : R2023 | Standard Specification for Anodes, Sacrificial Zinc Alloy |
ASTM B 943 : 2016 : R2022 | Standard Specification for Zinc and Tin Alloy Wire Used in Thermal Spraying for Electronic Applications |
ASTM B 860 : 2018 : R2022 | Standard Specification for Zinc Master Alloys for Use in Hot Dip Galvanizing |
ASTM B 816 : 2000 : R2021 | Standard Specification for Coatings of Cadmium-Zinc Mechanically Deposited |
ASTM B 907 : 2016 : R2021 | Standard Specification for Zinc, Tin and Cadmium Base Alloys Used as Solders |
ASTM B 852 : 2016 : R2022 | Standard Specification for Continuous Galvanizing Grade (CGG) Zinc Alloys for Hot-Dip Galvanizing of Sheet Steel |
ASTM B 989 : 2022 | Standard Specification for High Fluidity (HF) Zinc-Aluminum Alloy in Ingot Form for Thin Wall Die Castings |
ASTM E 29 : 2013 : R2019 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
ASTM E 135 : 2023 | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
ASTM E 29 : 2002 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
ASTM D 1193 : 1977 : R1983 : EDT 1 | Standard Specification for Reagent Water |
ASTM E 135 : 2021 : REV A | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
ASTM E 60 : 2011 : R2016 | Standard Practice for Analysis of Metals, Ores, and Related Materials by Spectrophotometry |
ASTM E 135 : 2003 : REV B | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
ASTM D 1193 : 2006 : R2011 | Standard Specification for Reagent Water |
ASTM E 1601 : 2019 | Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method |
ASTM E 1601 : 1998 | Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method |
ASTM E 1601 : 2010 | Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method |
ASTM D 1193 : 1991 | Standard Specification for Reagent Water |
ASTM E 135 : 2002 : REV A | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
ASTM E 135 : 2022 : REV B | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
ASTM E 1601 : 2012 | Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method |
ASTM E 135 : 2022 : REV A | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
ASTM E 135 : 2021 | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
ASTM E 135 : 2003 | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
ASTM E 135 : 2003 : REV C | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
ASTM E 55 : 2023 | Standard Practice for Sampling Wrought Nonferrous Metals and Alloys for Determination of Chemical Composition |
ASTM E 60 : 2011 : R2022 : EDT 1 | Standard Practice for Analysis of Metals, Ores, and Related Materials by Spectrophotometry |
ASTM D 1193 : 1970 | Standard Specification For Reagent Water |
ASTM E 173 : 1993 | Practice for Conducting Interlaboratory Studies of Methods for Chemical Analysis of Metals (Withdrawn 1997) |
ASTM D 1193 : 2006 | Standard Specification for Reagent Water |
ASTM E 135 : 2022 | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
ASTM E 50 : 1982 : R1986 | Standard Practices for Apparatus, Reagents, and Safety Precautions for Chemical Analysis of Metals |
ASTM D 1193 : 1999 | Standard Specification for Reagent Water |
ASTM E 135 : 2020 : REV B | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
ASTM E 55 : 2011 : R2017 | Standard Practice for Sampling Wrought Nonferrous Metals and Alloys for Determination of Chemical Composition |
ASTM D 1193 : 2006 : R2018 | Standard Specification for Reagent Water |
ASTM E 55 : 2011 : R2022 : EDT 1 | Standard Practice for Sampling Wrought Nonferrous Metals and Alloys for Determination of Chemical Composition |
ASTM E 29 : 2022 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.