ASTM E 539 : 2019
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Analysis of Titanium Alloys by Wavelength Dispersive X-Ray Fluorescence Spectrometry
Available format(s)
PDF
Language(s)
English
Published date
01-03-2019
Superseded date
07-05-2019
Superseded by
€69.17
Excluding VAT
This test method2covers the X-ray fluorescence analysis of titanium alloys for the following elements in the ranges indicated: Element Aluminum Chromium Copper Iron Manganese Molybdenum Nickel Niobium Palladium Ruthenium Silicon Tin Vanadium Yttrium Zirconium 1.2This standard does not purport to address all of the safety concerns, if any, associated with its use.
| Committee |
E 01
|
| DocumentType |
Test Method
|
| Pages |
10
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This test method2 covers the X-ray fluorescence analysis of titanium alloys for the following elements in the ranges indicated:
| Element | Range, % |
| Aluminum | 0.041 to 8.00 |
| Chromium | 0.013 to 4.00 |
| Copper | 0.015 to 0.60 |
| Iron | 0.023 to 2.00 |
| Manganese | 0.003 to 9.50 |
| Molybdenum | 0.005 to 4.00 |
| Nickel | 0.005 to 0.80 |
| Niobium | 0.004 to 7.50 |
| Palladium | 0.014 to 0.200 |
| Ruthenium | 0.019 to 0.050 |
| Silicon | 0.014 to 0.15 |
| Tin | 0.017 to 3.00 |
| Vanadium | 0.017 to 15.50 |
| Yttrium | 0.0011 to 0.0100 |
| Zirconium | 0.007 to 4.00 |
1.2This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in Section 10.
1.3This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| SAE AMS7011 | Electron Beam-Powder Bed Fusion (EB-PBF) Produced Preforms and Parts Titanium Alloy, 6Al - 4V Hot Isostatically Pressed |
| ASTM B 1009 : 2024 | Standard Specification for Titanium Alloy Bars for Near Surface Mounts in Civil Structures |
| ASTM F 2066 : 2023 | Standard Specification for Wrought Titanium-15 Molybdenum Alloy for Surgical Implant Applications (UNS R58150) |
| ASTM B 988 : 2018 : R2022 | Standard Specification for Powder Metallurgy (PM) Titanium and Titanium Alloy Structural Components |
| ASTM B 348/B348M : 2021 | Standard Specification for Titanium and Titanium Alloy Bars and Billets |
| ASTM F 620 : 2020 | Standard Specification for Titanium Alloy Forgings for Surgical Implants in the Alpha Plus Beta Condition |
| ASTM B 265 : 2020 : REV A | Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate |
| ASTM F 3049 : 2014 : R2021 | Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes |
| ASTM B 863 : 2023 | Standard Specification for Titanium and Titanium Alloy Wire |
| ASTM F 2989 : 2021 | Standard Specification for Metal Injection Molded Unalloyed Titanium Components for Surgical Implant Applications |
| ASTM F 1108 : 2021 | Standard Specification for Titanium-6Aluminum-4Vanadium Alloy Castings for Surgical Implants (UNS R56406) |
| ASTM B 862 : 2023 | Standard Specification for Titanium and Titanium Alloy Welded Pipe |
| ASTM F 561 : 2019 | Standard Practice for Retrieval and Analysis of Medical Devices, and Associated Tissues and Fluids |
| ASTM F 136 : 2013 : R2021 : EDT 1 | Standard Specification for Wrought Titanium-6Aluminum-4Vanadium ELI (Extra Low Interstitial) Alloy for Surgical Implant Applications (UNS R56401) |
| ASTM F 2885 : 2017 : R2023 | Standard Specification for Metal Injection Molded Titanium-6Aluminum-4Vanadium Components for Surgical Implant Applications |
| ASTM B 861 : 2024 | Standard Specification for Titanium and Titanium Alloy Seamless Pipe |
| ASTM F 1472 : 2023 | Standard Specification for Wrought Titanium-6Aluminum-4Vanadium Alloy for Surgical Implant Applications (UNS R56400) |
| ASTM F 67 : 2024 | Standard Specification for Unalloyed Titanium, for Surgical Implant Applications (UNS R50250, UNS R50400, UNS R50550, UNS R50700) |
| ASTM F 1295 : 2024 | Standard Specification for Wrought Titanium-6Aluminum-7Niobium Alloy for Surgical Implant Applications (UNS R56700) |
| ASTM B 381 : 2021 | Standard Specification for Titanium and Titanium Alloy Forgings |
| ASTM F 2924 : 2014 : R2021 | Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion |
| ASTM F 3046 : 2021 | Standard Specification for Wrought Titanium-3Aluminum-2.5Vanadium Alloy for Surgical Implant Applications (UNS R56320) |
| ASTM F 3001 : 2014 : R2021 | Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium ELI (Extra Low Interstitial) with Powder Bed Fusion |
| ASTM B 977/B977M : 2024 | Standard Specification for Titanium and Titanium Alloy Ingots |
| ASTM F 3302 : 2018 | Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Titanium Alloys via Powder Bed Fusion |
| SAE AMS4895 | Titanium Alloy, Round Bars 5Al - 1Fe Annealed |
| SAE AMS6901D | Titanium Alloy Bars, Forgings, and Forging Stock, 5Al - 2.5Sn, Extra Low Interstitial, Annealed |
| ASTM B 1009 : 2020 | Standard Specification for Titanium Alloy Bars for Near Surface Mounts in Civil Structures |
| SAE AMS6949A | Titanium Alloy, Sheet and Strip 4Al - 2.5V - 1.5Fe Electron Beam Single Melted. Annealed |
| SAE AMS6949B | Titanium Alloy, Sheet and Strip, 4Al - 2.5V - 1.5Fe, Electron Beam Single Melted. Annealed |
| ASTM E 29 : 2013 : R2019 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
| ASTM E 1621 : 2013 | Standard Guide for Elemental Analysis by Wavelength Dispersive X-Ray Fluorescence Spectrometry |
| ASTM E 1172 : 2016 | Standard Practice for Describing and Specifying a Wavelength Dispersive X-Ray Spectrometer |
| ASTM E 2857 : 2021 | Standard Guide for Validating Analytical Methods |
| ASTM E 135 : 2023 | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 1361 : 2002 : R2021 | Standard Guide for Correction of Interelement Effects in X-Ray Spectrometric Analysis |
| ASTM E 135 : 2024 | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 29 : 2002 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
| ASTM E 135 : 2021 : REV A | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 1172 : 2022 | Standard Practice for Describing and Specifying a Wavelength Dispersive X-Ray Spectrometer |
| ASTM E 1621 : 2005 | Standard Guide for X-Ray Emission Spectrometric Analysis |
| ASTM E 1172 : 1987 : R2011 | Standard Practice for Describing and Specifying a Wavelength-Dispersive X-Ray Spectrometer |
| ASTM E 1329 : 2000 : R2005 | Standard Practice for Verification and Use of Control Charts in Spectrochemical Analysis |
| ASTM E 1172 : 1987 : R2003 | Standard Practice for Describing and Specifying a Wavelength-Dispersive X-Ray Spectrometer |
| ASTM E 1361 : 1990 : R1999 | Standard Guide for Correction of Interelement Effects in X-Ray Spectrometric Analysis |
| ASTM E 1361 : 2002 : R2007 | Standard Guide for Correction of Interelement Effects in X-Ray Spectrometric Analysis |
| ASTM E 135 : 2003 : REV B | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 1621 : 2022 | Standard Guide for Elemental Analysis by Wavelength Dispersive X-Ray Fluorescence Spectrometry |
| ASTM E 1361 : 2002 | Standard Guide for Correction of Interelement Effects in X-Ray Spectrometric Analysis |
| ASTM E 135 : 2023 : REV A | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 2972 : 2015 | Standard Guide for Production, Testing, and Value Assignment of In-House Reference Materials for Metals, Ores, and Other Related Materials |
| ASTM E 1329 : 2010 | Standard Practice for Verification and Use of Control Charts in Spectrochemical Analysis (Withdrawn 2019) |
| ASTM E 1621 : 2021 | Standard Guide for Elemental Analysis by Wavelength Dispersive X-Ray Fluorescence Spectrometry |
| ASTM E 2857 : 2022 | Standard Guide for Validating Analytical Methods |
| ASTM E 1329 : 2000 | Standard Practice for Verification and Use of Control Charts in Spectrochemical Analysis |
| ASTM E 135 : 2025 : REV A | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 135 : 2025 | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 135 : 2002 : REV A | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 1361 : 2002 : R2014 : EDT 1 | Standard Guide for Correction of Interelement Effects in X-Ray Spectrometric Analysis |
| ASTM E 135 : 2022 : REV B | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 1172 : 1987 : R1996 | Standard Practice for Describing and Specifying a Wavelength-Dispersive X-Ray Spectrometer |
| ASTM E 2857 : 2011 : R2021 : EDT 1 | Standard Guide for Validating Analytical Methods |
| ASTM E 2857 : 2011 : R2016 | Standard Guide for Validating Analytical Methods |
| ASTM E 135 : 2022 : REV A | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E2972 : 2015(2019) | Standard Guide for Production, Testing, and Value Assignment of In-House Reference Materials for Metals, Ores, and Other Related Materials |
| ASTM E 135 : 2021 | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 135 : 2003 | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 135 : 2003 : REV C | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 2857 : 2011 | Standard Guide for Validating Analytical Methods |
| ASTM E 135 : 2022 | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 1621 : 1994 : R1999 | Standard Guide for X-Ray Emission Spectrometric Analysis |
| ASTM E 135 : 2020 : REV B | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 1172 : 1987 : R2001 | Standard Practice for Describing and Specifying a Wavelength-Dispersive X-Ray Spectrometer |
| ASTM E 29 : 2022 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.