• There are no items in your cart

ASTM E 581 : 2017 : REV A

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

Standard Test Methods for Chemical Analysis of Manganese-Copper Alloys

Available format(s)

Hardcopy , PDF

Superseded date

28-09-2022

Language(s)

English

Published date

06-12-2017

€67.30
Excluding VAT

Committee
E 01
DocumentType
Test Method
Pages
6
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

1.1These test methods cover the chemical analysis of manganese-copper alloys having chemical compositions within the following limits:

Element

Range, %

Copper

68.0 to 72.0

Manganese

28.0 to 32.0

Carbon

0.03 max

Iron

0.01 max

Phosphorus

0.01 max

Silicon

0.05 max

Sulfur

0.01 max

1.2The test methods appear in the following order:

Sections

Iron by the 1,10-Phenanthroline
 Spectrophotometric Method
 [0.003 % to 0.02 %]

11 – 20

Manganese by the (Ethylenedinitrilo)
 Tetraacetic Acid (EDTA)—
 Back-Titrimetric Method [28 % to 32 %]


21 – 27

Phosphorus by the
 Molybdivanadophosphoric Acid
 Extraction Spectrophotometric Method
 [0.002 % to 0.014 %]


28 – 38

1.3The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM B 30 : 2020 Standard Specification for Copper Alloys in Ingot and Other Remelt Forms
ASTM B 250/B250M : 2019 Standard Specification for General Requirements for Wrought Copper Alloy Wire
ASTM B 249/B249M : 2020 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings
ASTM B 950 : 2022 Standard Guide for Editorial Procedures and Form of Product Specifications for Copper and Copper Alloys
ASTM B 824 : 2017 Standard Specification for General Requirements for Copper Alloy Castings

ASTM E 29 : 2013 : R2019 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
ASTM E 29 : 2002 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
ASTM D 1193 : 1977 : R1983 : EDT 1 Standard Specification for Reagent Water
ASTM E 135 : 2021 : REV A Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
ASTM E 60 : 2011 : R2016 Standard Practice for Analysis of Metals, Ores, and Related Materials by Spectrophotometry
ASTM E 135 : 2003 : REV B Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
ASTM D 1193 : 2006 : R2011 Standard Specification for Reagent Water
ASTM E 1601 : 2019 Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method
ASTM E 1601 : 1998 Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method
ASTM E 1601 : 2010 Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method
ASTM D 1193 : 1991 Standard Specification for Reagent Water
ASTM E 135 : 2002 : REV A Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
ASTM E 1601 : 2012 Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method
ASTM E 135 : 2021 Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
ASTM E 135 : 2003 Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
ASTM E 135 : 2003 : REV C Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
ASTM E 60 : 2011 : R2022 : EDT 1 Standard Practice for Analysis of Metals, Ores, and Related Materials by Spectrophotometry
ASTM D 1193 : 1970 Standard Specification For Reagent Water
ASTM E 173 : 1993 Practice for Conducting Interlaboratory Studies of Methods for Chemical Analysis of Metals (Withdrawn 1997)
ASTM D 1193 : 2006 Standard Specification for Reagent Water
ASTM E 50 : 1982 : R1986 Standard Practices for Apparatus, Reagents, and Safety Precautions for Chemical Analysis of Metals
ASTM D 1193 : 1999 Standard Specification for Reagent Water
ASTM E 135 : 2020 : REV B Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
ASTM D 1193 : 2006 : R2018 Standard Specification for Reagent Water
ASTM E 29 : 2022 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.