ASTM E 705 : 2018
Current
The latest, up-to-date edition.
Standard Test Method for Measuring Reaction Rates by Radioactivation of Neptunium-237
Hardcopy , PDF
English
01-12-2018
This test method covers procedures for measuring reaction rates by assaying a fission product (F.P.) from the fission reaction 237Np(n,f)F.P.
Committee |
E 10
|
DocumentType |
Test Method
|
Pages |
6
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
Supersedes |
1.1This test method covers procedures for measuring reaction rates by assaying a fission product (F.P.) from the fission reaction 237Np(n,f)F.P.
1.2The reaction is useful for measuring neutrons with energies from approximately 0.7 to 6 MeV and for irradiation times up to 90 years, provided that the analysis methods described in Practice E261 are followed. If dosimeters are analyzed after irradiation periods longer than 90 years, the information inferred about the fluence during irradiation periods more than 90 years before the end of the irradiation should not be relied upon without supporting data from dosimeters withdrawn earlier.
1.3Equivalent fission neutron fluence rates as defined in Practice E261 can be determined.
1.4Detailed procedures for other fast-neutron detectors are referenced in Practice E261.
1.5The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.6This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.7This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM E 1005 : 2010 | Standard Test Method for Application and Analysis of Radiometric Monitors for Reactor Vessel Surveillance, E 706(IIIA) |
ASTM E 181 : 2017 | Standard Test Methods for Detector Calibration and Analysis of Radionuclides |
ASTM E 1018 : 2020 | Standard Guide for Application of ASTM Evaluated Cross Section Data File |
ASTM E 1005 : 2015 | Standard Test Method for Application and Analysis of Radiometric Monitors for Reactor Vessel Surveillance |
ASTM E 262 : 2017 | Standard Test Method for Determining Thermal Neutron Reaction Rates and Thermal Neutron Fluence Rates by Radioactivation Techniques |
ASTM E 1018 : 2009 : R2013 : EDT 1 | Standard Guide for Application of ASTM Evaluated Cross Section Data File |
ASTM E 320 : 1979 : R1990 : EDT 1 | Test Method for Cesium-137 in Nuclear Fuel Solutions by Radiochemical Analysis |
ASTM E 262 : 2017 : R2024 : EDT 1 | Standard Test Method for Determining Thermal Neutron Reaction Rates and Thermal Neutron Fluence Rates by Radioactivation Techniques |
ASTM E 170 : 2024 | Standard Terminology Relating to Radiation Measurements and Dosimetry |
ASTM E 170 : 2020 | Standard Terminology Relating to Radiation Measurements and Dosimetry |
ASTM E 181 : 2023 | Standard Guide for Detector Calibration and Analysis of Radionuclides in Radiation Metrology for Reactor Dosimetry |
ASTM E 944 : 1996 | Standard Guide for Application of Neutron Spectrum Adjustment Methods in Reactor Surveillance, (IIA) |
ASTM E 393 : 1996 | Standard Test Method for Measuring Reaction Rates by Analysis of Barium-140 From Fission Dosimeters |
ASTM E 261 : 2016 | Standard Practice for Determining Neutron Fluence, Fluence Rate, and Spectra by Radioactivation Techniques |
ASTM E 170 : 2023 | Standard Terminology Relating to Radiation Measurements and Dosimetry |
ASTM E 1018 : 2009 | Standard Guide for Application of ASTM Evaluated Cross Section Data File, Matrix E 706 (IIB) |
ASTM E 1005 : 2021 | Standard Test Method for Application and Analysis of Radiometric Monitors for Reactor Vessel Surveillance |
ASTM E 1018 : 2009 : R2013 | Standard Guide for Application of ASTM Evaluated Cross Section Data File, Matrix E706 (IIB) |
ASTM E 1018 : 2001 | Standard Guide for Application of ASTM Evaluated Cross Section Data File, Matrix E 706 (IIB) |
ASTM E 1005 : 1997 | Standard Test Method for Application and Analysis of Radiometric Monitors for Reactor Vessel Surveillance, E 706(IIIA) |
ASTM E 1005 : 2003 : EDT 1 | Standard Test Method for Application and Analysis of Radiometric Monitors for Reactor Vessel Surveillance, E 706(IIIA) |
ASTM E 704 : 1996 | Standard Test Method for Measuring Reaction Rates by Radioactivation of Uranium-238 |
ASTM E 1018 : 2020 : EDT 1 | Standard Guide for Application of ASTM Evaluated Cross Section Data File |
ASTM E 261 : 2016 : R2021 | Standard Practice for Determining Neutron Fluence, Fluence Rate, and Spectra by Radioactivation Techniques |
ASTM E 1005 : 2016 | Standard Test Method for Application and Analysis of Radiometric Monitors for Reactor Vessel Surveillance |
ASTM E 1018 : 1995 | Standard Guide for Application of ASTM Evaluated Cross Section Data File, Matrix E 706 (IIB) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.