ASTM E 72 : 2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Methods of Conducting Strength Tests of Panels for Building Construction
Hardcopy , PDF
05-11-2022
English
19-05-2015
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
E 06
|
| DocumentType |
Test Method
|
| Pages |
13
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1These test methods cover the following procedures for determining the structural properties of segments of wall, floor, and roof constructions:
| Section | |
| Test Specimens | 3 |
| Loading | 4 |
| Deformation Measurements | 5 |
| Reports | 6 |
| Precision and Accuracy | 7 |
| TESTING WALLS | |
| Significance and Use | 8 |
| Compressive Load | 9 |
| Tensile Load | 10 |
| Transverse Load—Specimen Horizontal | 11 |
| Transverse Load—Specimen Vertical | 12 |
| Concentrated Load | 13 |
| Impact Load—See Test Methods E695 and E661 | |
| Racking Load—Evaluation of Sheathing Materials | 14 |
| Racking Load—Evaluation of Sheathing Materials (Wet) | 15 |
| TESTING FLOORS | |
| Significance and Use | 16 |
| Transverse Load | 17 |
| Concentrated Load | 18 |
| Impact Load—See Test Methods E695 and E661 | |
| TESTING ROOFS | |
| Section | |
| Significance and Use | 19 |
| Transverse Load | 20 |
| Concentrated Load | 21 |
| APPENDIX | |
| Technical Interpretation | Appendix X1 |
1.2The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.2.1Exception—SI units are used in Fig. 6.
| NFPA 120:2023 | Standard for Fire Prevention and Control in Coal Mines |
| ASTM E 1803 : 2014 : R2022 | Standard Test Methods for Determining Strength Capacities of Structural Insulated Panels |
| ASTM C 956 : 2004 : R2019 | Standard Specification for Installation of Cast-In-Place Reinforced Gypsum Concrete |
| ASTM E 2570/E2570M : 2007 : R2019 | Standard Test Methods for Evaluating Water-Resistive Barrier (WRB) Coatings Used under Exterior Insulation and Finish Systems (EIFS) or EIFS with Drainage |
| ASTM D 2394 : 2017 : R2022 | Standard Test Methods for Simulated Service Testing of Wood and Wood-Based Finish Flooring |
| ASTM C 887 : 2020 | Standard Specification for Packaged, Dry, Combined Materials for Surface Bonding Mortar |
| ASTM C 90 : 2022 | Standard Specification for Loadbearing Concrete Masonry Units |
| ASTM D 3841 : 2021 | Standard Specification for Glass-Fiber-Reinforced Polyester Plastic Panels |
| ASTM C 1852 : 2020 | Standard Guide for Product Selection/Delivery Systems for Aerosol Foam Sealants and Adhesives |
| ASTM E 2969 : 2018 | Standard Test Methods for Transverse Load Tests on Panels Used in Wall Construction |
| ASTM C 208 : 2022 | Standard Specification for Cellulosic Fiber Insulating Board |
| ASTM E 2126 : 2011 : R2018 | Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Vertical Elements of the Lateral Force Resisting Systems for Buildings |
| ASTM E 2126 : 2005 | Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Walls for Buildings |
| ASTM D 4442 : 2007 | Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials |
| ASTM E 2322 :2003 | Standard Test Method for Conducting Traverse and Concentrated Load Tests on Panels used in Floor and Roof Construction |
| ASTM D 2395 : 1993 : R1997 : EDT 2 | Standard Test Methods for Specific Gravity of Wood and Wood-Based Materials |
| ASTM D 7438 : 2020 | Standard Practice for Field Calibration and Application of Hand-Held Moisture Meters |
| ASTM D 4442 : 2015 | Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Based Materials |
| ASTM E 2322 : 2003 : R2015 | Standard Test Method for Conducting Transverse and Concentrated Load Tests on Panels used in Floor and Roof Construction |
| ASTM E 2126 : 2019 | Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Vertical Elements of the Lateral Force Resisting Systems for Buildings |
| ASTM E 2126 : 2002 : REV A | Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Framed Walls for Buildings |
| ASTM E 2126 : 2011 | Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Vertical Elements of the Lateral Force Resisting Systems for Buildings |
| ASTM E 695 : 1979 : R1997 : EDT 1 | Standard Method for Measuring Relative Resistance of Wall, Floor, and Roof Construction to Impact Loading |
| ASTM D 4442 : 2016 | Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Based Materials |
| ASTM D 2395 : 2017 : R2022 | Standard Test Methods for Density and Specific Gravity (Relative Density) of Wood and Wood-Based Materials |
| ASTM D 2395 : 1993 : R1997 : EDT 1 | Standard Test Methods for Specific Gravity of Wood and Wood-Based Materials |
| ASTM D 7438 : 2013 | Standard Practice for Field Calibration and Application of Hand-Held Moisture Meters |
| ASTM D 2395 : 2007 : REV A | Standard Test Methods for Specific Gravity of Wood and Wood-Based Materials |
| ASTM E 2126 : 2002 | Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Framed Walls for Buildings |
| ASTM D 2395 : 2017 | Standard Test Methods for Density and Specific Gravity (Relative Density) of Wood and Wood-Based Materials |
| ASTM E 2126 : 2001 | Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Framed Walls for Buildings |
| ASTM D 7438 : 2008 | Standard Practice for Field Calibration and Application of Hand-Held Moisture Meters |
| ASTM D 4442 : 2020 | Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Based Materials |
| ASTM E 2126 : 2008 | Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Vertical Elements of the Lateral Force Resisting Systems for Buildings |
| ASTM E 2322 : 2003 : R2009 | Standard Test Method for Conducting Traverse and Concentrated Load Tests on Panels used in Floor and Roof Construction |
| ASTM D 2395 : 2014 : EDT 1 | Standard Test Methods for Density and Specific Gravity (Relative Density) of Wood and Wood-Based Materials |
| ASTM D 2395 : 2014 | Standard Test Methods for Density and Specific Gravity (Relative Density) of Wood and Wood-Based Materials |
| ASTM E 73 : 2013 : R2021 | Standard Practice for Static Load Testing of Truss Assemblies |
| ASTM E 4 : 2021 | Standard Practices for Force Calibration and Verification of Testing Machines |
| ASTM D 2395 : 2006 | Standard Test Methods for Specific Gravity of Wood and Wood-Based Materials |
| ASTM E 2126 : 2010 | Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Vertical Elements of the Lateral Force Resisting Systems for Buildings |
| ASTM D 2395 : 2007 : REV A : EDT 1 | Standard Test Methods for Specific Gravity of Wood and Wood-Based Materials |
| ASTM E 73 : 1983 : R1996 : EDT 1 | Standard Practice for Static Load Testing of Truss Assemblies |
| ASTM E 73 : 2013 | Standard Practice for Static Load Testing of Truss Assemblies |
| ASTM E 2126 : 2009 | Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Vertical Elements of the Lateral Force Resisting Systems for Buildings |
| ASTM E 2126 : 2007 : REV A | Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Vertical Elements of the Lateral Force Resisting Systems for Buildings |
| ASTM D 2395 : 2002 | Standard Test Methods for Specific Gravity of Wood and Wood-Based Materials |
| ASTM D 4442 : 1992 : R1997 : EDT 1 | Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials |
| ASTM D 4442 : 1984 | Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials |
| ASTM D 4442 : 1992 : R2003 | Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.