ASTM D 86 : 2020 : REV B
|
Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
|
ASTM B 389 : 1981 : R2020
|
Standard Test Method for Thermal Deflection Rate of Spiral and Helical Coils of Thermostat Metal
|
ASTM D 402/D402M : 2014
|
Standard Test Method for Distillation of Cutback Asphalt (Withdrawn 2023)
|
ASTM D 243/D243M : 2020
|
Standard Test Method for Residue of Specified Penetration
|
ASTM E 576 : 2014 : R2020
|
Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units in the Vertical Position
|
ASTM C 511 : 2019
|
Standard Specification for Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes
|
ASTM D 1525 : 2017 : EDT 1
|
Standard Test Method for Vicat Softening Temperature of Plastics
|
ASTM D 2726/D2726M : 2021
|
Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Asphalt Mixtures
|
ASTM E 100 : 2019
|
Standard Specification for ASTM Hydrometers
|
ASTM E 1333 : 2014
|
Standard Test Method for Determining Formaldehyde Concentrations in Air and Emission Rates from Wood Products Using a Large Chamber
|
ASTM D 5582 : 2014
|
Standard Test Method for Determining Formaldehyde Levels from Wood Products Using a Desiccator
|
ASTM D 7552 : 2009 : R2014
|
Standard Test Method for Determining the Complex Shear Modulus (G*) Of Bituminous Mixtures Using Dynamic Shear Rheometer
|
ASTM E 344 : 2020
|
Terminology Relating to Thermometry and Hydrometry
|
ASTM D 3143/D3143M : 2019
|
Standard Test Method for Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus
|
ASTM D 5853 : 2017 : REV A
|
Standard Test Method for Pour Point of Crude Oils
|
ASTM E 207 : 2008 : R2015 : EDT 1
|
Standard Test Method for Thermal EMF Test of Single Thermoelement Materials by Comparison with a Reference Thermoelement of Similar EMF-Temperature Properties
|
ASTM E 2995 : 2015 : REV A : R2020
|
Standard Specification for ASTM Thermohydrometers with Integral Low-Hazard Thermometers
|
ASTM E 50 : 2017
|
Standard Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials
|
ASTM D 6648 : 2008 : R2016
|
Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
|
ASTM E 644 : 2011(R2019)
|
Standard Test Methods for Testing Industrial Resistance Thermometers
|
ASTM D 5801 : 2017
|
Standard Test Method for Toughness and Tenacity of Asphalt Materials
|
ASTM D 2170/D2170M : 2018
|
Standard Test Method for Kinematic Viscosity of Asphalts
|
ASTM D 445 : 2021
|
Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
|
ASTM D 6926 : 2020
|
Standard Practice for Preparation of Asphalt Mixture Specimens Using Marshall Apparatus
|
ASTM D 4957 : 2018
|
Standard Test Method for Apparent Viscosity of Asphalt Emulsion Residues and Non-Newtonian Asphalts by Vacuum Capillary Viscometer
|
ASTM D 2171/D2171M : 2018
|
Standard Test Method for Viscosity of Asphalts by Vacuum Capillary Viscometer
|
ASTM E 2623 : 2014
|
Standard Practice for Reporting Thermometer Calibrations
|
ASTM E 546 : 2014 : R2020
|
Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units
|
ASTM D 746 : 2020
|
Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact
|
ASTM E 220 : 2019
|
Standard Test Method for Calibration of Thermocouples By Comparison Techniques
|
ASTM D 4493 : 2020
|
Standard Test Method for Solidification Point of Bisphenol A<brk/>(4,4<emph type="ital" >′</emph>-Isopropylidenediphenol)
|
ASTM D 113 : 2017
|
Standard Test Method for Ductility of Asphalt Materials
|
ASTM D 2386 : 2019
|
Standard Test Method for Freezing Point of Aviation Fuels
|
ASTM D 5/D5M : 2020
|
Standard Test Method for Penetration of Bituminous Materials
|
ASTM D 70/D70M : 2021
|
Standard Test Method for Specific Gravity and Density of Semi-Solid Asphalt Binder (Pycnometer Method)
|
ASTM D 3012 : 2019
|
Standard Test Method for Thermal-Oxidative Stability of Polypropylene Using a Specimen Rotator Within an Oven
|
ASTM D 6007 : 2014
|
Standard Test Method for Determining Formaldehyde Concentrations in Air from Wood Products Using a Small-Scale Chamber
|
ASTM D 6084/D6084M : 2018
|
Standard Test Method for Elastic Recovery of Asphalt Materials by Ductilometer
|
ASTM E 126 : 2019
|
Standard Test Method for Inspection, Calibration, and Verification of ASTM Hydrometers
|
ASTM E 1 : 2014 : R2020
|
Standard Specification for ASTM Liquid-in-Glass Thermometers
|
ASTM D 4693 : 2007 : R2017
|
Standard Test Method for Low-Temperature Torque of Grease-Lubricated Wheel Bearings
|
ASTM C 729 : 2011 : R2016
|
Standard Test Method for Density of Glass by the Sink-Float Comparator
|
ASTM D 1754/D1754M : 2020
|
Standard Test Method for Effects of Heat and Air on Asphaltic Materials (Thin-Film Oven Test)
|
ASTM D 7578 : 2020
|
Standard Guide for Calibration Requirements for Elemental Analysis of Petroleum Products and Lubricants
|
ASTM D 1747 : 2009 : R2019
|
Standard Test Method for Refractive Index of Viscous Materials
|
ASTM D 7175 : 2015
|
Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
|