![header thumbnail](/images/publishers\astm_cover.gif)
ASTM E 83 : 1998 : EDT 1
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
![header thumbnail](/images/publishers\astm_cover.gif)
Standard Practice for Verification and Classification of Extensometer
Available format(s)
Hardcopy , PDF
Superseded date
01-01-2014
Language(s)
English
Published date
01-01-2014
Committee |
E 28
|
DocumentType |
Standard Practice
|
Pages |
12
|
ProductNote |
Editorial corrections were made throughout, in May 1999.
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
Supersedes |
ASTM C 1360 : 2017 | Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures |
ASTM E 3098 : 2017 | Standard Test Method for Mechanical Uniaxial Pre-strain and Thermal Free Recovery of Shape Memory Alloys |
ASTM E 21 : 2020 | Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials |
ASTM B 1008 : 2018 | Standard Test Method for Stress-Strain Testing for Overhead Electrical Conductors |
ASTM D 6272 : 2017 : EDT 1 | Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending |
ASTM E 238 : 2017 : REV A | Standard Test Method for Pin-Type Bearing Test of Metallic Materials |
ASTM D 3552 : 2017 | Standard Test Method for Tensile Properties of Fiber Reinforced Metal Matrix Composites |
ASTM E 2954 : 2015 | Standard Test Method for Axial Compression Test of Reinforced Plastic and Polymer Matrix Composite Vertical Members |
ASTM D 3479/D3479M : 2019 | Standard Test Method for Tension-Tension Fatigue of Polymer Matrix Composite Materials |
ASTM C 1361 : 2010 : R2019 | Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Advanced Ceramics at Ambient Temperatures |
ASTM D 3039/D3039M : 2017 | Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials |
ASTM C 1863 : 2018 | Standard Test Method for Hoop Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramic Composite Tubular Test Specimens at Ambient Temperature Using Direct Pressurization |
ASTM D 7615/D7615M : 2019 | Standard Practice for Open-Hole Fatigue Response of Polymer Matrix Composite Laminates |
ASTM F 2516 : 2018 | Standard Test Method for Tension Testing of Nickel-Titanium Superelastic Materials |
ASTM D 3916 : 2008 : R2016 | Standard Test Method for Tensile Properties of Pultruded Glass-Fiber-Reinforced<brk /> Plastic Rod |
ASTM A 1034/A1034M : 2010 : REV A : R2015 | Standard Test Methods for Testing Mechanical Splices for Steel Reinforcing Bars |
ASTM C 1275 : 2018 | Standard Test Method for Monotonic Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperature |
ASTM F 606/F606M : 2021 | Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets |
ASTM D 3983 : 1998 : R2019 | Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen |
ASTM D 8387/D8387M : 2021 | Standard Test Method for High Bypass – Low Bearing Interaction Response of Polymer Matrix Composite Laminates |
ASTM E 132 : 2017 | Standard Test Method for Poisson’s Ratio at Room Temperature |
ASTM C 1359 : 2018 : EDT 1 | Standard Test Method for Monotonic Tensile Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics With Solid Rectangular Cross Section Test Specimens at Elevated Temperatures |
ASTM C 1273 : 2018 | Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Ambient Temperatures |
ASTM E 251 : 2020 : REV A | Standard Test Methods for Performance Characteristics of Metallic Bonded Resistance Strain Gages |
ASTM E 2309/E2309M : 2020 | Standard Practices for Verification of Displacement Measuring Systems and Devices Used in Material Testing Machines |
ASTM D 7913/D7913M : 2014 : R2020 | Standard Test Method for Bond Strength of Fiber-Reinforced Polymer Matrix Composite Bars to Concrete by Pullout Testing |
ASTM E 139 : 2011 : R2018 | Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials |
ASTM E 2714 : 2013 : R2020 | Standard Test Method for Creep-Fatigue Testing |
ASTM D 6108 : 2019 | Standard Test Method for Compressive Properties of Plastic Lumber and Shapes |
ASTM E 2207 : 2015 : R2021 | Standard Practice for Strain-Controlled Axial-Torsional Fatigue Testing with Thin-Walled Tubular Specimens |
ASTM F 2977 : 2020 | Standard Test Method for Small Punch Testing of Polymeric Biomaterials Used in Surgical Implants |
ASTM C 1424 : 2015 : R2019 | Standard Test Method for Monotonic Compressive Strength of Advanced Ceramics at Ambient Temperature |
ASTM C 1499 : 2019 | Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature |
ASTM E 1942 : 1998 : R2018 : EDT 1 | Standard Guide for Evaluating Data Acquisition Systems Used in Cyclic Fatigue and Fracture Mechanics Testing |
ASTM C 1899 : 2021 | Standard Test Method for Flexural Strength of Continuous Fiber-Reinforced Advanced Ceramic Tubular Test Specimens at Ambient Temperature |
ASTM E 111 : 2017 | Standard Test Method for Young’s Modulus, Tangent Modulus, and Chord Modulus |
ASTM D 6484/D6484M : 2020 | Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates |
ASTM C 1819 : 2021 | Standard Test Method for Hoop Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramic Composite Tubular Test Specimens at Ambient Temperature Using Elastomeric Inserts |
ASTM C 469/C469M : 2014 : EDT 1 | Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression |
ASTM B 557 : 2015 | Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products |
ASTM C 1358 : 2018 | Standard Test Method for Monotonic Compressive Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross Section Test Specimens at Ambient Temperatures |
ASTM D 790 : 2017 | Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials |
ASTM E 646 : 2016 | Standard Test Method for Tensile Strain-Hardening Exponents (<emph type="bdit">n</emph > -Values) of Metallic Sheet Materials |
ASTM D 5335 : 2014 | Standard Test Method for Linear Coefficient of Thermal Expansion of Rock Using Bonded Electric Resistance Strain Gauges (Withdrawn 2023) |
ASTM D 7774 : 2017 | Standard Test Method for Flexural Fatigue Properties of Plastics |
ASTM D 198 : 2021 | Standard Test Methods of Static Tests of Lumber in Structural Sizes |
ASTM C 1773 : 2021 | Standard Test Method for Monotonic Axial Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramic Tubular Test Specimens at Ambient Temperature |
ASTM D 7791 : 2017 | Standard Test Method for Uniaxial Fatigue Properties of Plastics |
ASTM D 1621 : 2016 | Standard Test Method for Compressive Properties of Rigid Cellular Plastics |
ASTM C 1337 : 2017 | Standard Test Method for Creep and Creep Rupture of Continuous Fiber-Reinforced Advanced Ceramics Under Tensile Loading at Elevated Temperatures |
ASTM D 5961/D5961M : 2017 | Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates |
ASTM D 2659 : 2016 | Standard Test Method for Column Crush Properties of Blown Thermoplastic Containers |
ASTM D 638 : 2014 | Standard Test Method for Tensile Properties of Plastics |
ASTM E 1012 : 2019 | Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application |
ASTM D 695 : 2015 | Standard Test Method for Compressive Properties of Rigid Plastics |
ASTM C 1366 : 2019 | Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Elevated Temperatures |
ASTM D 2105 : 2001 : R2019 | Standard Test Method for Longitudinal Tensile Properties of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube |
ASTM B 500/B500M : 2012 : R2018 | Standard Specification for Metallic Coated or Aluminum Clad Stranded Steel Core for Use in Overhead Electrical Conductors |
ASTM C 1869 : 2018 | Standard Test Method for Open-Hole Tensile Strength of Fiber-Reinforced Advanced Ceramic Composites |
ASTM E 606/E606M : 2021 | Standard Test Method for Strain-Controlled Fatigue Testing |
ASTM D 3410/D3410M : 2016 : EDT 1 | Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading |
ASTM D 4018 : 2017 | Standard Test Methods for Properties of Continuous Filament Carbon and Graphite Fiber Tows |
ASTM E 2760 : 2019 : EDT 1 | Standard Test Method for Creep-Fatigue Crack Growth Testing |
ASTM E 2208 : 2002 : R2018 : EDT 1 | Standard Guide for Evaluating Non-Contacting Optical Strain Measurement Systems |
ASTM E 1922 : 2004 : R2015 | Standard Test Method for Translaminar Fracture Toughness of Laminated and Pultruded Polymer Matrix Composite Materials |
ASTM E 209 : 2018 | Standard Practice for Compression Tests of Metallic Materials at Elevated Temperatures with Conventional or Rapid Heating Rates and Strain Rates |
ASTM C 1291 : 2018 | Standard Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time to Failure for Monolithic Advanced Ceramics |
ASTM E 9 : 2019 | Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature |
ASTM A 370 : 2020 | Standard Test Methods and Definitions for Mechanical Testing of Steel Products |
ASTM E 8/E8M : 2021 | Standard Test Methods for Tension Testing of Metallic Materials |
ASTM D 4535 : 2021 | Standard Test Methods for Measurement of Thermal Expansion of Rock Using Dilatometer |
ASTM A 1064/A1064M : 2018 : REV A | Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete |
ASTM E 1450 : 2016 | Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium |
ASTM D 5083 : 2017 | Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens |
ASTM E 3097 : 2017 | Standard Test Method for Mechanical Uniaxial Constant Force Thermal Cycling of Shape Memory Alloys |
ASTM D 7248/D7248M : 2021 | Standard Test Method for High Bearing - Low Bypass Interaction Response of Polymer Matrix Composite Laminates Using 2-Fastener Specimens |
ASTM A 1022/A1022M : 2016 : REV B | Standard Specification for Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement |
ASTM E 1856 : 2013 | Standard Guide for Evaluating Computerized Data Acquisition Systems Used to Acquire Data from Universal Testing Machines |
ASTM E 517 : 2019 | Standard Test Method for Plastic Strain Ratio <emph type="bdit">r</emph> for Sheet Metal |
ASTM E 2368 : 2010 : R2017 | Standard Practice for Strain Controlled Thermomechanical Fatigue Testing |
ASTM B 557M : 2015 | Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products (Metric) |
ASTM E 1457 : 2019 : EDT 1 | Standard Test Method for Measurement of Creep Crack Growth Times in Metals |
ASTM D 4027 : 1998 : R2019 | Standard Test Method for Measuring Shear Properties of Structural Adhesives by the Modified-Rail Test |
ASTM D 7205/D7205M : 2021 | Standard Test Method for Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars |
€76.06
Excluding VAT
EUR
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.