ASTM E 976 : 2015 : REDLINE
Current
Current
The latest, up-to-date edition.
Standard Guide for Determining the Reproducibility of Acoustic Emission Sensor Response
Available format(s)
PDF
Language(s)
English
Published date
01-12-2015
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 03.03, 2017 Specifies simple economical procedures for testing or comparing the performance of acoustic emission sensors.
| Committee |
E 07
|
| DocumentType |
Redline
|
| Pages |
7
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
1.1This guide defines simple economical procedures for testing or comparing the performance of acoustic emission sensors. These procedures allow the user to check for degradation of a sensor or to select sets of sensors with nearly identical performances. The procedures are not capable of providing an absolute calibration of the sensor nor do they assure transferability of data sets between organizations.
1.2Units—The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM E 1118 : 2005 | Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP) |
| ASTM E 1932 : 2012 | Standard Guide for Acoustic Emission Examination of Small Parts |
| UNI ISO 22096 : 2011 | CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - ACOUSTIC EMISSION |
| ASTM E 2075/E2075M : 2015 : REDLINE | Standard Practice for Verifying the Consistency of AE-Sensor Response Using an Acrylic Rod |
| ASTM E 2984/E2984M : 2014 | Standard Practice for Acoustic Emission Examination of High Pressure, Low Carbon, Forged Piping using Controlled Hydrostatic Pressurization |
| ASTM E 2661/E2661M : 2015 : REDLINE | Standard Practice for Acoustic Emission Examination of Plate-like and Flat Panel Composite Structures Used in Aerospace Applications |
| ASTM F 2174 : 2002 : R2008 | Standard Practice for Verifying Acoustic Emission Sensor Response |
| ASTM F 1430/F1430M : 2018 : REDLINE | Standard Test Method for Acoustic Emission Testing of Insulated and Non-Insulated Aerial Personnel Devices with Supplemental Load Handling Attachments |
| ASTM E 2907/E2907M : 2013 | Standard Practice for Examination of Paper Machine Rolls Using Acoustic Emission from Crack Face Rubbing |
| ASTM F 914 : 2003 | Standard Test Method for Acoustic Emission for Insulated and Non-Insulated Aerial Personnel Devices Without Supplemental Load Handling Attachments |
| ASTM F 2174 : 2002 | Standard Practice for Verifying Acoustic Emission Sensor Response |
| ASTM E 1932 : 2012 : R2017 | Standard Guide for Acoustic Emission Examination of Small Parts |
| ASTM E 2598 : 2007 | Standard Practice for Acoustic Emission Examination of Cast Iron Yankee and Steam Heated Paper Dryers |
| ASTM F 2174 : 2002 : R2015 | Standard Practice for Verifying Acoustic Emission Sensor Response |
| ASTM C 1175 : 1999 : REV A : R2004 | Standard Guide to Test Methods and Standards for Nondestructive Testing of Advanced Ceramics |
| ASTM E 543 : 2015 : REDLINE | Standard Specification for Agencies Performing Nondestructive Testing |
| ASTM E 650 : 1997 : R2007 | Standard Guide for Mounting Piezoelectric Acoustic Emission Sensors |
| ASTM E 1888/E1888M : 2017 : REDLINE | Standard Practice for Acoustic Emission Examination of Pressurized Containers Made of Fiberglass Reinforced Plastic with Balsa Wood Cores |
| ASTM E 650 : 1997 : R2002 : EDT 1 | Standard Guide for Mounting Piezoelectric Acoustic Emission Sensors |
| ASTM E 1930/E1930M : 2017 : REDLINE | Standard Practice for Examination of Liquid-Filled Atmospheric and Low-Pressure Metal Storage Tanks Using Acoustic Emission |
| ASTM E 1118/E1118M : 2016 : REDLINE | Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP) |
| ASTM F 1430 : 2003 | Standard Test Method for Acoustic Emission Testing of Insulated and Non-Insulated Aerial Personnel Devices with Supplemental Load Handling Attachments |
| ASTM E 2981 : 2015 | Standard Guide for Nondestructive Testing of the Composite Overwraps in Filament Wound Pressure Vessels Used in Aerospace Applications |
| ASTM F 1430 : 2003 : EDT 1 | Standard Test Method for Acoustic Emission Testing of Insulated and Non-Insulated Aerial Personnel Devices with Supplemental Load Handling Attachments |
| ASTM E 2191/E2191M : 2016 : REDLINE | Standard Practice for Examination of Gas-Filled Filament-Wound Composite Pressure Vessels Using Acoustic Emission |
| ASTM E 1211/E1211M : 2017 : REDLINE | Standard Practice for Leak Detection and Location Using Surface-Mounted Acoustic Emission Sensors |
| ASTM E 2075 : 2005 | Standard Practice for Verifying the Consistency of AE-Sensor Response Using an Acrylic Rod |
| IPC 9709 : 0 | TEST GUIDELINES FOR ACOUSTIC EMISSION MEASUREMENT DURING MECHANICAL TESTING |
| UNE-IEC/TS 62478:2017 | High voltage test techniques - Measurement of partial discharges by electromagnetic and acoustic methods |
| MIL-HDBK-786 Base Document:1987 | FIELD ASSURANCE OF ACOUSTIC EMISSION SYSTEM OPERATION USING SIMULATED ACOUSTIC EMISSION EVENTS |
| MIL-HDBK-788 Base Document:1989 | SELECTION OF ACOUSTIC EMISSION SENSORS |
| ASTM E 2076/E2076M : 2015 : REDLINE | Standard Practice for Examination of Fiberglass Reinforced Plastic Fan Blades Using Acoustic Emission |
| ISO 22096:2007 | Condition monitoring and diagnostics of machines Acoustic emission |
| ASTM E 2076 : 2005 | Standard Test Method for Examination of Fiberglass Reinforced Plastic Fan Blades Using Acoustic Emission |
| ASTM E 650 : 1997 | Standard Guide for Mounting Piezoelectric Acoustic Emission Sensors |
| ASTM C 1175 : 1999 : REV A : R2010 | Standard Guide to Test Methods and Standards for Nondestructive Testing of Advanced Ceramics (Withdrawn 2018) |
| ASTM F 914/F914M : 2018 : REDLINE | Standard Test Method for Acoustic Emission for Aerial Personnel Devices Without Supplemental Load Handling Attachments |
| PD IEC/TS 62478:2016 | High voltage test techniques. Measurement of partial discharges by electromagnetic and acoustic methods |
| 17/30345929 DC : 0 | BS ISO 16836 - NON-DESTRUCTIVE TESTING - ACOUSTIC EMISSION TESTING - MEASUREMENT METHOD FOR ACOUSTIC EMISSION SIGNALS IN CONCRETE |
| IEC TS 62478:2016 | High voltage test techniques - Measurement of partial discharges by electromagnetic and acoustic methods |
| BS ISO 22096:2007 | Condition monitoring and diagnostics of machines. Acoustic emission |
| ASTM F 1797 : 2018 : REDLINE | Standard Test Method for Acoustic Emission Testing of Insulated and Non-Insulated Digger Derricks |
| ASTM E 2374 : 2016 : REDLINE | Standard Guide for Acoustic Emission System Performance Verification |
| ASTM E 2598/E2598M : 2013 : REDLINE | Standard Practice for Acoustic Emission Examination of Cast Iron Yankee and Steam Heated Paper Dryers |
| ASTM E 2478 : 2011 : R2016 | Standard Practice for Determining Damage-Based Design Stress for Glass Fiber Reinforced Plastic (GFRP) Materials Using Acoustic Emission |
| ASTM E 2982 : 2014 | Standard Guide for Nondestructive Testing of Thin-Walled Metallic Liners in Filament-Wound Pressure Vessels Used in Aerospace Applications |
| ASTM E 650/E650M : 2017 : REDLINE | Standard Guide for Mounting Piezoelectric Acoustic Emission Sensors |
| ASTM C 1175 : 1999 : REV A | Standard Guide to Test Methods and Standards for Nondestructive Testing of Advanced Ceramics |
| ASTM E 1139/E1139M : 2017 : REDLINE | Standard Practice for Continuous Monitoring of Acoustic Emission from Metal Pressure Boundaries |
| ASTM E 2478 : 2011 | Standard Practice for Determining Damage-Based Design Stress for Glass Fiber Reinforced Plastic (GFRP) Materials Using Acoustic Emission |
| ASTM E 750 : 2015 : REDLINE | Standard Practice for Characterizing Acoustic Emission Instrumentation |
| ASTM E 2374 : 2016 : REDLINE | Standard Guide for Acoustic Emission System Performance Verification |
| ASTM E 2075 : 2005 | Standard Practice for Verifying the Consistency of AE-Sensor Response Using an Acrylic Rod |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.