ASTM F 1052 : 2014
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Pressure Testing Vapor Protective Suits
Available format(s)
Hardcopy , PDF
Superseded date
14-10-2020
Superseded by
Language(s)
English
Published date
01-05-2014
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
F 23
|
| DocumentType |
Test Method
|
| Pages |
5
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This test method measures the ability of a vapor protective suits, including seams, and closures to maintain a fixed, positive pressure.
1.2This test method does not measure vapor protection of suits. This test method measures the integrity of the suit, glove, foot protection, and visor materials, as well as the seams, and closures of a vapor protective suit. Exhaust valves fitted in the vapor protective suit must be sealed or blocked for this test and therefore are not functionally tested.
1.3The values as stated in in.-H2O (mm-H2O) units are to be regarded as the standard.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Section 7.
| ASTM F 1461 : 2017 | Standard Practice for Chemical Protective Clothing Program |
| ASTM F 1001 : 2012 : R2017 | Standard Guide for Selection of Chemicals to Evaluate Protective Clothing Materials |
| ASTM F 2704 : 2017 : REV A | Standard Specification for Air-Fed Protective Ensembles |
| ASTM F 1359/F1359M : 2016 : REV A | Standard Test Method for Liquid Penetration Resistance of Protective Clothing or Protective Ensembles Under a Shower Spray While on a Manikin |
| ASTM F 1296 : 2008 : R2015 | Standard Guide for Evaluating Chemical Protective Clothing |
| ASTM F 2588 : 2012 | Standard Test Method for Man-In-Simulant Test (MIST) for Protective Ensembles |
| ASTM F 1154 : 1999 : REV A : R2004 | Standard Practices for Qualitatively Evaluating the Comfort, Fit, Function, and Integrity of Chemical-Protective Suit Ensembles |
| ASTM F 1383 : 2012 : EDT 1 | Standard Test Method for Permeation of Liquids and Gases through Protective Clothing Materials under Conditions of Intermittent Contact |
| ASTM D 4157 : 2013 : R2017 | Standard Test Method for Abrasion Resistance of Textile Fabrics (Oscillatory Cylinder Method) |
| ASTM D 2582 : 2008 | Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting |
| ASTM F 1383 : 2011 | Standard Test Method for Permeation of Liquids and Gases through Protective Clothing Materials under Conditions of Intermittent Contact |
| ASTM D 2582 : 2003 | Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting |
| ASTM D 4157 : 2013 | Standard Test Method for Abrasion Resistance of Textile Fabrics (Oscillatory Cylinder Method) |
| ASTM F 1407 : 2011 | Standard Test Method for Resistance of Chemical Protective Clothing Materials to Liquid Permeation-Permeation Cup Method |
| ASTM F 1383 : 1999 : REV A | Standard Test Method for Resistance of Protective Clothing Materials to Permeation by Liquids or Gases Under Conditions of Intermittent Contact |
| ASTM F 1407 : 2012 : R2017 | Standard Test Method for Resistance of Chemical Protective Clothing Materials to Liquid Permeation—Permeation Cup Method |
| ASTM F 1359 : 1999 : REV A : R2004 | Standard Test Method for Liquid Penetration Resistance of Protective Clothing or Protective Ensembles Under a Shower Spray While on a Mannequin |
| ASTM D 2582 : 2009 | Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting |
| ASTM D 4157 : 2007 | Standard Test Method for Abrasion Resistance of Textile Fabrics (Oscillatory Cylinder Method) |
| ASTM F 1407 : 1999 : REV A : R2006 | Standard Test Method for Resistance of Chemical Protective Clothing Materials to Liquid Permeation-Permeation Cup Method |
| ASTM D 2582 : 2007 | Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting |
| ASTM D 2582 : 2016 | Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting |
| ASTM F 1358 : 2016 | Standard Test Method for Effects of Flame Impingement on Materials Used in Protective Clothing Not Designated Primarily for Flame Resistance |
| ASTM F 1383 : 2007 | Standard Test Method for Permeation of Liquids and Gases through Protective Clothing Materials under Conditions of Intermittent Contact |
| ASTM D 4157 : 2010 | Standard Test Method for Abrasion Resistance of Textile Fabrics (Oscillatory Cylinder Method) |
| ASTM D 2582 : 2000 | Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting |
| ASTM F 1359 : 1999 : REV A | Standard Test Method for Liquid Penetration Resistance of Protective Clothing or Protective Ensembles Under a Shower Spray While on a Mannequin |
| ASTM F 2588 : 2006 | Standard Test Method for Man-In-Simulant Test (MIST) for Protective Ensembles |
| ASTM F 1407 : 1999 : REV A | Standard Test Method for Resistance of Chemical Protective Clothing Materials to Liquid Permeation-Permeation Cup Method |
| ASTM F 1358 : 2008 | Standard Test Method for Effects of Flame Impingement on Materials Used in Protective Clothing Not Designated Primarily for Flame Resistance |
| ASTM F 1383 : 2012 | Standard Test Method for Permeation of Liquids and Gases through Protective Clothing Materials under Conditions of Intermittent Contact |
| ASTM F 1154 : 2018 | Standard Practices for Evaluating the Comfort, Fit, Function, and Durability of Protective Ensembles, Ensemble Elements, and Other Components |
| ASTM F 1154 : 2011 | Standard Practices for Qualitatively Evaluating the Comfort, Fit, Function, and Durability of Protective Ensembles and Ensemble Components |
| ASTM F 2588 : 2012 | Standard Test Method for Man-In-Simulant Test (MIST) for Protective Ensembles |
| ASTM F 2588 : 2007 | Standard Test Method for Man-In-Simulant Test (MIST) for Protective Ensembles |
| ASTM F 1358 : 2000 : R2005 | Standard Test Method for Effects of Flame Impingement on Materials Used in Protective Clothing Not Designated Primarily for Flame Resistance |
| ASTM F 1154 : 2010 | Standard Practices for Qualitatively Evaluating the Comfort, Fit, Function, and Durability of Protective Ensembles and Ensemble Components+ |
| ASTM F 1154 : 1999 : REV A | Standard Practices for Qualitatively Evaluating the Comfort, Fit, Function, and Integrity of Chemical-Protective Suit Ensembles |
| ASTM F 1359 : 2007 | Standard Test Method for Liquid Penetration Resistance of Protective Clothing or Protective Ensembles Under a Shower Spray While on a Mannequin |
| ASTM F 1358 : 2000 | Standard Test Method for Effects of Flame Impingement on Materials Used in Protective Clothing Not Designated Primarily for Flame Resistance |
| ASTM F 1407 : 2012 | Standard Test Method for Resistance of Chemical Protective Clothing Materials to Liquid Permeation—Permeation Cup Method |
| ASTM F 2588 : 2012 : R2020 | Standard Test Method for Man-In-Simulant Test (MIST) for Protective Ensembles |
| ASTM D 4157 : 2002 | Standard Test Method for Abrasion Resistance of Textile Fabrics (Oscillatory Cylinder Method) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.