Skip to content
Please enter a keyword to search

  • ASTM F 1085 : 2014

    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

    Standard Specification for Mattress and Box Springs for Use in Berths in Marine Vessels

    Available format(s):  Hardcopy, PDF

    Superseded date:  12-08-2020

    Language(s):  English

    Published date:  01-11-2014

    Publisher:  American Society for Testing and Materials

    Add To Cart

    Scope - (Show below) - (Hide below)

    1.1This specification provides the requirements for mattresses and box springs that are for use in berths for officers, crew, and passengers in marine vessels. This shall be considered a minimum standard.

    1.2The values stated in SI units are to be regarded as the standard. The values given in parentheses, in inch-pound units, are for information only.

    1.3This standard is used to measure and describe the response of materials, products, or assemblies to heat and flame under controlled conditions, but does not by itself incorporate all factors required for fire-hazard or fire-risk assessment of the materials, products, or assemblies under actual fire conditions.

    1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

    General Product Information - (Show below) - (Hide below)

    Committee F 25
    Document Type Standard
    Publisher American Society for Testing and Materials
    Status Superseded
    Supersedes

    Standards Referencing This Book - (Show below) - (Hide below)

    ASTM E 1354 : 2010 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
    ASTM F 1566 : 2008 Standard Test Methods for Evaluation of Innersprings, Boxsprings, Mattresses or Mattress Sets
    ASTM D 3951 : 2010 Standard Practice for Commercial Packaging
    ASTM D 1424 : 1996 Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum Type (Elmendorf) Apparatus
    ASTM F 1566 : 1999 Standard Test Methods for Evaluation of Innersprings and Boxsprings
    ASTM E 1590 : 2002 Standard Test Method for Fire Testing of Mattresses
    ASTM E 1354 : 2014 : EDT 1 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
    ASTM E 1590 : 1999 Standard Test Method for Fire Testing of Mattresses
    ASTM F 1566 : 2009 Standard Test Methods for Evaluation of Innersprings, Boxsprings, Mattresses or Mattress Sets
    ASTM D 5034 : 2009 Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test)
    ASTM D 1424 : 2009 Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum Type (Elmendorf) Apparatus
    ASTM F 1566 : 2014 Standard Test Methods for Evaluation of Innersprings, Boxsprings, Mattresses or Mattress Sets
    ASTM D 6413 : 1999 Standard Test Method for Flame Resistance of Textiles (Vertical Test)
    ASTM D 3951 : 1998 Standard Practice for Commercial Packaging
    ASTM E 1354 : 2004 : REV A Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
    ASTM E 1354 : 1999 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
    ASTM D 1424 : 2009 : R2013 : EDT 1 Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum (Elmendorf-Type) Apparatus
    ASTM E 1354 : 2010 : REV A Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
    ASTM E 1354 : 2003 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
    ASTM E 1590 : 2017 Standard Test Method for Fire Testing of Mattresses
    ASTM E 1354 : 2002 : REV D : EDT 1 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
    ASTM E 1590 : 2016 Standard Test Method for Fire Testing of Mattresses
    ASTM D 5034 : 2009 : R2013 Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test)
    ASTM D 3574 : 2011 Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams
    ASTM E 1354 : 2008 : REV A Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
    ASTM E 1354 : 2002 : REV D Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
    ASTM D 1424 : 2009 : R2013 Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum (Elmendorf-Type) Apparatus
    ASTM D 5034 : 1995 : R2001 Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test)
    ASTM D 3951 : 2015 Standard Practice for Commercial Packaging
    ASTM D 3951 : 2018 Standard Practice for Commercial Packaging
    ASTM E 1354 : 2009 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
    ASTM D 3574 : 2008 Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams
    ASTM D 3574 : 2017 Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams
    ASTM E 1354 : 2015 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
    ASTM D 6193 : 1997 Standard Practice for Stitches and Seams
    ASTM E 1354 : 2016 : REV A Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
    ASTM D 3574 : 1995 Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams
    ASTM D 6193 : 2011 Standard Practice for Stitches and Seams
    ASTM D 6193 : 2009 Standard Practice for Stitches and Seams
    ASTM D 3574 : 1977 : EDT 2 Standard Methods of Testing Flexible Cellular Materials-Slab, Bonded, And Molded Urethane Foams
    ASTM E 1590 : 2012 Standard Test Method for Fire Testing of Mattresses
    ASTM D 6413 : 2011 Standard Test Method for Flame Resistance of Textiles (Vertical Test)
    ASTM E 1354 : 2016 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
    ASTM D 6413 : 2011 : REV A Standard Test Method for Flame Resistance of Textiles (Vertical Test)
    ASTM E 1354 : 2017 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
    ASTM D 5034 : 2008 Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test)
    ASTM E 1354 : 2002 : REV A Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
    ASTM D 3574 : 2003 Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams
    ASTM E 1590 : 2007 Standard Test Method for Fire Testing of Mattresses
    ASTM E 1354 : 2015 : REV A Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
    ASTM D 3574 : 2016 Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams
    ASTM E 1354 : 2011 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
    ASTM D 1424 : 2007 : REV A Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum Type (Elmendorf) Apparatus
    ASTM E 1590 : 2001 Standard Test Method for Fire Testing of Mattresses
    ASTM E 1354 : 2011 : REV B Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
    ASTM D 5034 : 2009 : R2017 Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test)
    ASTM D 1424 : 2007 Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum Type (Elmendorf) Apparatus
    ASTM E 1354 : 2011 : REV A Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
    ASTM D 3574 : 2001 Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams
    ASTM D 6413 : 2008 Standard Test Method for Flame Resistance of Textiles (Vertical Test)
    ASTM D 6193 : 2016 Standard Practice for Stitches and Seams
    ASTM D 5034 : 1995 Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test)
    ASTM D 6193 : 1997 : R2004 Standard Practice for Stitches and Seams
    ASTM D 1424 : 2009 : R2019 Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum (Elmendorf-Type) Apparatus
    ASTM E 1354 : 2004 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
    ASTM E 1354 : 2013 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
    ASTM E 1354 : 2014 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
    ASTM D 3574 : 2005 Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams
    ASTM D 3574 : 2001 : EDT 1 Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams
    ASTM E 1590 : 2013 Standard Test Method for Fire Testing of Mattresses
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective