ASTM F 1108 : 2021
Current
The latest, up-to-date edition.
Standard Specification for Titanium-6Aluminum-4Vanadium Alloy Castings for Surgical Implants (UNS R56406)
Hardcopy , PDF
English
17-09-2021
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
F 04
|
| DocumentType |
Standard
|
| Pages |
5
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This specification covers the chemical, mechanical, and metallurgical requirements for cast titanium-6aluminum-4vanadium alloy (UNS R56406).
1.2Units—The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM F 2885 : 2017 | Standard Specification for Metal Injection Molded Titanium-6Aluminum-4Vanadium Components for Surgical Implant Applications |
| ASTM F 2887 : 2017 | Standard Specification for Total Elbow Prostheses |
| ASTM F 2068 : 2015 | Standard Specification for Femoral Prostheses—Metallic Implants (Withdrawn 2023) |
| ASTM F 2083 : 2021 | Standard Specification for Knee Replacement Prosthesis (Withdrawn 2023) |
| ASTM F 2091 : 2015 | Standard Specification for Acetabular Prostheses (Withdrawn 2023) |
| ASTM F 2665 : 2021 | Standard Specification for Total Ankle Replacement Prosthesis |
| ASTM F 1378 : 2018 : EDT 1 | Standard Specification for Shoulder Prostheses |
| ASTM F 1672 : 2014 : R2019 | Standard Specification for Resurfacing Patellar Prosthesis (Withdrawn 2023) |
| ASTM E 1409 : 2013 | Standard Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by Inert Gas Fusion |
| ASTM E 8/E8M : 2024 | Standard Test Methods for Tension Testing of Metallic Materials |
| ASTM E 1447 : 2022 | Standard Test Method for Determination of Hydrogen in Reactive Metals and Reactive Metal Alloys by Inert Gas Fusion with Detection by Thermal Conductivity or Infrared Spectrometry |
| ASTM E 29 : 2013 : R2019 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
| ASTM E 8/E8M : 2021 | Standard Test Methods for Tension Testing of Metallic Materials |
| ASTM F 601 : 2023 | Standard Practice for Fluorescent Penetrant Inspection of Metallic Surgical Implants |
| ASTM F 629 : 2024 | Standard Practice for Radiography of Cast Metallic Surgical Implants |
| ASTM E 1409 : 2013 : R2021 | Standard Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by Inert Gas Fusion |
| ASTM F 629 : 2020 | Standard Practice for Radiography of Cast Metallic Surgical Implants |
| ASTM E 3 : 2011 : R2017 | Standard Guide for Preparation of Metallographic Specimens |
| ASTM E 2994 : 2016 | Standard Test Method for Analysis of Titanium and Titanium Alloys by Spark Atomic Emission Spectrometry and Glow Discharge Atomic Emission Spectrometry (Performance-Based Method) |
| ASTM E 8/E8M : 2022 | Standard Test Methods for Tension Testing of Metallic Materials |
| ASTM F 601 : 2018 | Standard Practice for Fluorescent Penetrant Inspection of Metallic Surgical Implants |
| ASTM E 1447 : 2009 : R2016 | Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by Inert Gas Fusion Thermal Conductivity/Infrared Detection Method |
| ASTM B 600 : 2022 | Standard Guide for Descaling and Cleaning Titanium and Titanium Alloy Surfaces |
| ASTM F 629 : 2024 | Standard Practice for Radiography of Cast Metallic Surgical Implants |
| ASTM E 2994 : 2021 | Standard Test Method for Analysis of Titanium and Titanium Alloys by Spark Atomic Emission Spectrometry and Glow Discharge Atomic Emission Spectrometry (Performance-Based Method) |
| ASTM E 407 : 2007 : R2015 : EDT 1 | Standard Practice for Microetching Metals and Alloys |
| ASTM E 407 : 2023 | Standard Practice for Microetching Metals and Alloys |
| ASTM B 600 : 2011 : R2017 | Standard Guide for Descaling and Cleaning Titanium and Titanium Alloy Surfaces |
| ASTM E 29 : 2022 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.