ASTM F 1148 : 2022
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Consumer Safety Performance Specification for Home Playground Equipment
Hardcopy , PDF
06-09-2024
English
01-03-2022
Committee |
F 15
|
DocumentType |
Standard
|
Pages |
47
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This consumer safety specification provides safety requirements for various types of home playground equipment intended for use by children aged from over 18 months through 10 years. It further provides such requirements for swings intended specifically for toddlers. Different age limits for various requirements are found in this specification. These limits reflect the nature of the hazards and the expected mental or physical ability, or both, of the child to cope with the hazards.
1.2Home playground equipment is defined as any product in which the support structure remains stationary while the activity is taking place and is intended for a child to perform any of the following activities: climbing, swinging, sliding, rocking, spinning, crawling, or creeping, or combination thereof. Fitness equipment is specifically excluded unless attached to the play equipment. This specification is not intended to apply to juvenile care products such as, but not limited to, infant swings, playpens/enclosures, beds, or furniture (including outdoor furniture, such as picnic tables, cradle rockers, activity centers being used as walker substitutes, bouncers, jumpers, infant carriers, and products specifically designed for therapeutic use). This specification is not intended to apply to equipment to be used in places of public assembly such as schools, nurseries, day-care centers, and parks. Equipment intended to be in child-care centers in private homes is not exempt from the requirements of this specification. Such centers are defined as situations in which the child-care provider does not care for more than six children under the age of ten that are not residing in the household of the caregiver, and the total number of children under the age of ten does not exceed ten, including the caregiver's own children. Electrically operated constant air inflatable devices are exempted from the requirements of this specification. Free standing play houses are exempt from this standard where the intent is that the child is standing or seated with their feet on the ground with no climbing, sliding, or swinging activities.
1.3Methods of identifying products that comply with this consumer safety specification are given. The illustrations of home playground equipment shown in Figs. A1.1-A1.4 are for informational purposes only and are not intended to limit or endorse certain types of playground equipment or equipment features. These illustrations are not intended to limit the variety or various combinations of equipment that are covered by this consumer safety specification.
1.4The purpose of this specification is to reduce the likelihood of life-threatening or debilitating injuries.
1.5If toy accessories or toy chests are attached to home playground equipment, they are applicable to this consumer safety specification and to any other applicable safety standards.
Note 1:See Annex A1 for figures referenced throughout this consumer safety performance specification.
1.6General Measures, Tolerances, and Conversions:
1.6.1The general tolerances for this specification (unless otherwise specified) are as follows:
Dimension | Tolerance |
X in. | ±0.5 in. |
X.X in. | ±0.05 in. |
X.XX in. | ±0.005 in. |
Angle: ± 1° | |
Force in N: | ±1.125 lbf (±5 N) |
Weight in lbs: | <220 lb (100 kg) ±1 lb (0.45 kg) |
Weight in lbs. | >220 lb (100 kg) ±2 lb (0.90 kg) |
These tolerances apply to all dimensions unless otherwise stated or when listed using terms like greater than, less than, minimum, or maximum are used.
1.6.2The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only.
1.6.3The metric conversion factors:
inch (in.) to millimetre (mm): | 1 in. = 25.4 mm |
pound (lb) to kilogram (kg): | 1 lb = 0.45359 kg |
pound-force (lbf) to newton (N): | 1 lbf = 4.4482 N |
1.6.4See Annex A1 for figures referenced throughout this specification.
1.7This consumer safety performance specification includes the following sections:
Scope | Section 1 |
Referenced Documents | Section 2 |
Terminology | Section 3 |
Materials and Manufacture | Section 4 |
General Requirements | Section 5 |
Performance Requirements | Section 6 |
Requirements for Access | Section 7 |
Equipment | Section 8 |
Equipment Layout | Section 9 |
Installation | Section 10 |
Structural Integrity | Section 11 |
Maintenance Instructions | Section 12 |
Labeling and Signage | Section 13 |
Information | Section 14 |
Keywords | Section 15 |
1.8This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.9This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM F 3351 : 2019 : EDT 1 | Standard Test Method for Playground Surface Impact Testing in Laboratory at Specified Test Height |
ASTM F 1292 : 2018 : EDT 1 | Standard Specification for Impact Attenuation of Surfacing Materials Within the Use Zone of Playground Equipment |
ASTM F 2710 : 2019 | Standard Consumer Safety Performance Specification for Commercial Cribs |
ASTM F 1882 : 2015 | Standard Specification for Residential Basketball Systems (Withdrawn 2024) |
ASTM F 3313 : 2020 | Standard Test Method for Determining Impact Attenuation of Playground Surfaces Within the Use Zone of Playground Equipment as Tested in the Field |
ASTM F 2373 : 2011 : R2017 | Standard Consumer Safety Performance Specification for Public Use Play Equipment for Children 6 Months through 23 Months |
ASTM F 963 : 2017 | Standard Consumer Safety Specification for Toy Safety |
ASTM F 2461 : 2020 : REV A | Standard Practice for Manufacture, Construction, Operation, and Maintenance of Aquatic Play Equipment |
ASTM F 1487 : 2021 | Standard Consumer Safety Performance Specification for Playground Equipment for Public Use |
ASTM F 2461 : 2023 | Standard Practice for Manufacture, Construction, Operation, and Maintenance of Aquatic Play Equipment |
ASTM F 3559 : 2024 | Standard Guide for ASTM F24 Standards Governing Lifecycle Management of Amusement Rides and Devices |
ASTM F 963 : 2023 | Standard Consumer Safety Specification for Toy Safety |
ASTM F 1292 : 2022 | Standard Specification for Impact Attenuation of Surfacing Materials Within the Use Zone of Playground Equipment |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.