ASTM F 1159 : 2016
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Design of Amusement Rides and Devices that are Outside the Purview of Other F24 Design Standards
Hardcopy , PDF
05-06-2021
English
27-01-2017
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
F 24
|
| DocumentType |
Standard Practice
|
| Pages |
2
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This practice establishes information and procedures for the design of amusement rides and devices and major modifications to amusement rides and devices which the designer/engineer identifies as outside the purview of other ASTM F24 design standards.
1.1.1Prior to designating an amusement ride or device as outside the purview of other ASTM F24 standards and subject to Practice F1159, the designer/engineer shall perform a review of all standards under the jurisdiction of the ASTM Committee F24 addressing amusement ride and device design and determine that Practice F1159 is appropriate and more applicable to the amusement ride or device than other ASTM Committee F24 practices addressing amusement ride and device design.
1.1.2In making such a determination, the designer/engineer shall consider the following:
1.1.2.1The general nature of the amusement ride or device;
1.1.2.2The absence of relevant specific requirements or features addressed by other ASTM Committee F24 practices.
1.2This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM F 2460 : 2011 | Standard Practice for Special Requirements for Bumper Boats |
| ASTM F 2007 : 2018 | Standard Practice for Design, Manufacture, and Operation of Concession Go-Karts and Facilities |
| ASTM F 1487 : 2017 | Standard Consumer Safety Performance Specification for Playground Equipment for Public Use |
| ASTM F 2375 : 2009 : R2017 | Standard Practice for Design, Manufacture, Installation and Testing of Climbing Nets and Netting/Mesh used in Amusement Rides, Devices, Play Areas and Attractions |
| ASTM F 2783 : 2017 | Standard Practice for Design, Manufacture, Operation, Maintenance, and Inspection of Amusement Rides and Devices, in Canada |
| ASTM F 3101 : 2015 | Standard Specification for Unsupervised Public Use Outdoor Fitness Equipment |
| ASTM F 3054 : 2018 | Standard Practice for Operations of Amusement Railway Rides, Devices, and Facilities |
| ASTM F 2960 : 2016 | Standard Practice for Permanent Amusement Railway Ride Tracks and Related Devices |
| ASTM F 2959 : 2018 | Standard Practice for Aerial Adventure Courses |
| ASTM F 2783 : 2020 | Standard Practice for Design, Manufacture, Operation, Maintenance, and Inspection of Amusement Rides and Devices, in Canada |
| ASTM F 1487 : 2021 | Standard Consumer Safety Performance Specification for Playground Equipment for Public Use |
| ASTM F 2460 : 2019 | Standard Practice for Special Requirements for Bumper Boats |
| ASTM F 2959 : 2019 | Standard Practice for Aerial Adventure Courses |
| ASTM F 2291 : 2011 | Standard Practice for Design of Amusement Rides and Devices |
| ASTM F 1193 : 2003 | Standard Practice for An Amusement Ride and Device Manufacturer Quality Assurance Program |
| ASTM F 1193 : 2016 | Standard Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices |
| ASTM F 2291 : 2009 : REV B | Standard Practice for Design of Amusement Rides and Devices |
| ASTM F 2374 : 2004 | Standard Practice for Design, Manufacture, Operation, and Maintenance of Inflatable Amusement Devices |
| ASTM F 2374 : 2006 | Standard Practice for Design, Manufacture, Operation, and Maintenance of Inflatable Amusement Devices |
| ASTM F 2291 : 2004 : REV A | Standard Practice for Design of Amusement Rides and Devices |
| ASTM F 2374 : 2010 | Standard Practice for Design, Manufacture, Operation, and Maintenance of Inflatable Amusement Devices |
| ASTM F 2374 : 2007 | Standard Practice for Design, Manufacture, Operation, and Maintenance of Inflatable Amusement Devices |
| ASTM F 2291 : 2005 : REV A | Standard Practice for Design of Amusement Rides and Devices |
| ASTM F 2291 : 2004 | Standard Practice for Design of Amusement Rides and Devices |
| ASTM F 2291 : 2016 | Standard Practice for Design of Amusement Rides and Devices |
| ASTM F 2374 : 2017 | Standard Practice for Design, Manufacture, Operation, and Maintenance of Inflatable Amusement Devices |
| ASTM F 1193 : 2014 | Standard Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices |
| ASTM F 1193 : 2006 | Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices |
| ASTM F 2291 : 2014 | Standard Practice for Design of Amusement Rides and Devices |
| ASTM F 2291 : 2017 | Standard Practice for Design of Amusement Rides and Devices |
| ASTM F 2291 : 2018 | Standard Practice for Design of Amusement Rides and Devices |
| ASTM F 1193 : 2018 : REV A | Standard Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices |
| ASTM F 2291 : 2015 | Standard Practice for Design of Amusement Rides and Devices |
| ASTM F 1193 : 2004 : REV B | Standard Practice for Amusement Ride and Device Manufacturer Quality Assurance Program and Manufacturing Requirements |
| ASTM F 2291 : 2003 | Standard Practice for Design of Amusement Rides and Devices |
| ASTM F 2291 : 2008 | Standard Practice for Design of Amusement Rides and Devices |
| ASTM F 1193 : 2003 : REV A | Standard Practice for Amusement Ride and Device Manufacturer Quality Assurance Program and Manufacturing Requirements |
| ASTM F 2291 : 2013 | Standard Practice for Design of Amusement Rides and Devices |
| ASTM F 1193 : 2005 | Standard Practice for Amusement Ride and Device Manufacturer Quality Assurance Program and Manufacturing Requirements |
| ASTM F 2291 : 2009 | Standard Practice for Design of Amusement Rides and Devices |
| ASTM F 1193 : 2004 | Standard Practice for Amusement Ride and Device Manufacturer Quality Assurance Program and Manufacturing Requirements |
| ASTM F 2291 : 2006 | Standard Practice for Design of Amusement Rides and Devices |
| ASTM F 2374 : 2019 | Standard Practice for Design, Manufacture, Operation, and Maintenance of Inflatable Amusement Devices |
| ASTM F 1193 : 2015 | Standard Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices |
| ASTM F 2374 : 2007 : REV A | Standard Practice for Design, Manufacture, Operation, and Maintenance of Inflatable Amusement Devices |
| ASTM F 1193 : 1997 | Standard Practice for An Amusement Ride and Device Manufacturer Quality Assurance Program |
| ASTM F 1193 : 2004 : REV A | Standard Practice for Amusement Ride and Device Manufacturer Quality Assurance Program and Manufacturing Requirements |
| ASTM F 2291 : 2005 | Standard Practice for Design of Amusement Rides and Devices |
| ASTM F 2291 : 2009 : REV A | Standard Practice for Design of Amusement Rides and Devices |
| ASTM F 1193 : 2018 | Standard Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices |
| ASTM F 2291 : 2019 | Standard Practice for Design of Amusement Rides and Devices |
| ASTM F 1193 : 2017 | Standard Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices |
| ASTM F 2291 : 2019 : EDT 1 | Standard Practice for Design of Amusement Rides and Devices |
| ASTM F 2291 : 2003 : REV A | Standard Practice for Design of Amusement Rides and Devices |
| ASTM F 2291 : 2020 | Standard Practice for Design of Amusement Rides and Devices |
| ASTM F 2291 : 2006 : REV A | Standard Practice for Design of Amusement Rides and Devices |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.