ASTM F 1447 : 2018
Current
The latest, up-to-date edition.
Standard Specification for Helmets Used in Recreational Bicycling or Roller Skating
Hardcopy , PDF
English
01-06-2018
1.1This specification covers performance requirements for helmets manufactured for use by recreational bicyclists or roller skaters. This specification recognizes the desirability of lightweight construction and ventilation; however, it is a performance standard and is not intended to restrict design.1.2All testing and requirements of this specification shall be in accordance with Test MethodsF1446, except where noted herein.1.3Partial utilization of this specification is prohibited. Any statement of compliance with this specification shall be a certification that the product meets all of the requirements of the specification in its entirety. A product that fails to meet any one of the requirements of this specification is considered to have failed the standard and should not be sold with any indication that it meets parts of the standard.1.4This standard is subject to revision at any time by ASTM. It must be reviewed every five years and if not revised either reapproved or withdrawn. References to the standard must include the version date. No references to a version that has been replaced or withdrawn shall be placed on any product or its packaging manufactured more than 24 months after the effective revision or withdrawal date. Go to astm.org to verify the latest version of this standard.NOTE 1:The current edition of this standard was approved on June 1, 2018.1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Committee |
F 08
|
DocumentType |
Standard
|
Pages |
4
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
Supersedes |
1.1This specification covers performance requirements for helmets manufactured for use by recreational bicyclists or roller skaters. This specification recognizes the desirability of lightweight construction and ventilation; however, it is a performance standard and is not intended to restrict design.
1.2All testing and requirements of this specification shall be in accordance with Test Methods F1446, except where noted herein.
1.3Partial utilization of this specification is prohibited. Any statement of compliance with this specification shall be a certification that the product meets all of the requirements of the specification in its entirety. A product that fails to meet any one of the requirements of this specification is considered to have failed the standard and should not be sold with any indication that it meets parts of the standard.
1.4This standard is subject to revision at any time by ASTM. It must be reviewed every five years and if not revised either reapproved or withdrawn. References to the standard must include the version date. No references to a version that has been replaced or withdrawn shall be placed on any product or its packaging manufactured more than 24 months after the effective revision or withdrawal date. Go to astm.org to verify the latest version of this standard.
Note 1:The current edition of this standard was approved on June 1, 2018.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM F 3175 : 2016 | Standard Guide for Training and Equipping Search and Rescue Personnel Operating on Mountain Bikes (Mountain Bike SAR Endorsement) |
ASTM F 2032 : 2015 | Standard Specification for Helmets Used for BMX Cycling |
ASTM F 1446 : 2011 | Standard Test Methods for Equipment and Procedures Used in Evaluating the Performance Characteristics of Protective Headgear |
ASTM F 2043 : 2000 | Standard Classification for Bicycle Usage |
ASTM F 1446 : 2015 | Standard Test Methods for Equipment and Procedures Used in Evaluating the Performance Characteristics of Protective Headgear |
ASTM F 1446 : 2000 | Standard Test Methods for Equipment and Procedures Used in Evaluating the Performance Characteristics of Protective Headgear |
ASTM F 1446 : 2012 | Standard Test Methods for Equipment and Procedures Used in Evaluating the Performance Characteristics of Protective Headgear |
ASTM F 1446 : 1994 | Standard Test Methods for Equipment and Procedures Used in Evaluating the Performance Characteristics of Protective Headgear |
ASTM F 1446 : 2015 : REV A | Standard Test Methods for Equipment and Procedures Used in Evaluating the Performance Characteristics of Protective Headgear |
ASTM F 1446 : 2001 : REV A | Standard Test Methods for Equipment and Procedures Used in Evaluating the Performance Characteristics of Protective Headgear |
ASTM F 1446 : 2005 | Standard Test Methods for Equipment and Procedures Used in Evaluating the Performance Characteristics of Protective Headgear |
ASTM F 1446 : 2015 : REV B | Standard Test Methods for Equipment and Procedures Used in Evaluating the Performance Characteristics of Protective Headgear |
ASTM F 2043 : 2013 | Standard Classification for Bicycle Usage |
ASTM F 1446 : 2011 : REV A | Standard Test Methods for Equipment and Procedures Used in Evaluating the Performance Characteristics of Protective Headgear |
ASTM F 1446 : 2013 | Standard Test Methods for Equipment and Procedures Used in Evaluating the Performance Characteristics of Protective Headgear |
ASTM F 1446 : 2003 | Standard Test Methods for Equipment and Procedures Used in Evaluating the Performance Characteristics of Protective Headgear |
ASTM F 1446 : 2004 | Standard Test Methods for Equipment and Procedures Used in Evaluating the Performance Characteristics of Protective Headgear |
ASTM F 1446 : 2001 | Standard Test Methods for Equipment and Procedures Used in Evaluating the Performance Characteristics of Protective Headgear |
ASTM F 1446 : 1993 | Standard Test Methods for Equipment and Procedures Used in Evaluating the Performance Characteristics of Protective Headgear |
ASTM F 1446 : 2008 | Standard Test Methods for Equipment and Procedures Used in Evaluating the Performance Characteristics of Protective Headgear |
ASTM F 2043 : 2009 | Standard Classification for Bicycle Usage |
ASTM F 2043 : 2013 : R2018 | Standard Classification for Bicycle Usage |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.