ASTM F 1494 : 2001
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Terminology Relating to Protective Clothing
Hardcopy , PDF
11-11-2014
English
10-06-2001
Committee |
F 23
|
DocumentType |
Reference Material
|
Pages |
7
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1 This standard defines the specialized terms used in standards developed by Committee F-23 on Protective Clothing.
1.2 Descriptions of Terms, which were drafted for use only in a single standard, are also included for convenient reference. Under ASTM rules they may become full definitions in the future, if they are used in additional standards.
1.3 Additional terminology relevant to protective clothing and to the components of protective clothing can be found in Terminology D123, D1566, and D4805.
ASTM F 2961 : 2015 | Standard Test Method for Characterizing Gripping Performance of Gloves Using a Torque Meter |
ASTM F 2962 : 2013 | Standard Practice for Conformity Assessment of Protective Clothing Worn by Operators Applying Pesticides (Withdrawn 2019) |
ASTM F 2588 : 2012 | Standard Test Method for Man-In-Simulant Test (MIST) for Protective Ensembles |
ASTM F 2733 : 2017 | Standard Specification for Flame-Resistant Rainwear for Protection Against Flame Hazards |
ASTM E 2875/E2875M : 2012 | Standard Guide for Personal Protective Equipment for the Handling of Flat Glass |
ASTM F 739 : 2012 : EDT 1 | Standard Test Method for Permeation of Liquids and Gases through Protective Clothing Materials under Conditions of Continuous Contact |
ASTM F 2101 : 2019 | Standard Test Method for Evaluating the Bacterial Filtration Efficiency (BFE) of Medical Face Mask Materials, Using a Biological Aerosol of <emph type="ital" >Staphylococcus aureus</emph> |
ASTM F 2547 : 2018 | Standard Test Method for Determining the Attenuation Properties in a Primary X-ray Beam of Materials Used to Protect Against Radiation Generated During the Use of X-ray Equipment |
ASTM F 1959/F1959M : 2014 : EDT 1 | Standard Test Method for Determining the Arc Rating of Materials for Clothing |
ASTM F 3094 : 2014 | Standard Test Method for Determining Protection Provided by X-ray Shielding Garments Used in Medical X-ray Fluoroscopy from Sources of Scattered X-Rays |
ASTM F 2371 : 2016 | Standard Test Method for Measuring the Heat Removal Rate of Personal Cooling Systems Using a Sweating Heated Manikin |
ASTM F 1461 : 2017 | Standard Practice for Chemical Protective Clothing Program |
ASTM F 2700 : 2008 : R2013 | Standard Test Method for Unsteady-State Heat Transfer Evaluation of Flame Resistant Materials for Clothing with Continuous Heating |
ASTM F 2300 : 2010 : R2016 | Standard Test Method for Measuring the Performance of Personal Cooling Systems Using Physiological Testing |
ASTM F 2178 : 2017 : REV B | Standard Test Method for Determining the Arc Rating and Standard Specification for Eye or Face Protective Products |
ASTM F 2702 : 2015 | Standard Test Method for Radiant Heat Performance of Flame Resistant Clothing Materials with Burn Injury Prediction (Withdrawn 2020) |
ASTM F 1001 : 2012 : R2017 | Standard Guide for Selection of Chemicals to Evaluate Protective Clothing Materials |
ASTM F 3352 : 2019 | Standard Specification for Isolation Gowns Intended for Use in Healthcare Facilities |
ASTM E 2771 : 2011 : R2019 | Standard Terminology for Homeland Security Applications |
ASTM F 3324 : 2019 | Standard Test Method for Measurement of Cut Resistance to Chainsaw in Leg-Protective Devices |
ASTM F 2061 : 2017 | Standard Practice for Chemical Protective Clothing: Wearing, Care, and Maintenance Instructions |
ASTM F 1930 : 2018 | Standard Test Method for Evaluation of Flame-Resistant Clothing for Protection Against Fire Simulations Using an Instrumented Manikin |
ASTM F 3031 : 2017 | Standard Practice for Range of Motion Evaluation of First Responder’s Protective Ensembles |
ASTM F 2703 : 2008 : R2013 | Standard Test Method for Unsteady-State Heat Transfer Evaluation of Flame Resistant Materials for Clothing with Burn Injury Prediction |
ASTM F 1939 : 2015 | Standard Test Method for Radiant Heat Resistance of Flame Resistant Clothing Materials with Continuous Heating |
ASTM F 1958/F1958M : 2012 | Standard Test Method for Determining the Ignitability of Non-flame-Resistant Materials for Clothing by Electric Arc Exposure Method Using Mannequins (Withdrawn 2021) |
ASTM F 2992/F2992M : 2015 | Standard Test Method for Measuring Cut Resistance of Materials Used in Protective Clothing with Tomodynamometer (TDM-100) Test Equipment |
ASTM F 1868 : 2017 | Standard Test Method for Thermal and Evaporative Resistance of Clothing Materials Using a Sweating Hot Plate |
ASTM F 1449 : 2008 : R2015 | Standard Guide for Industrial Laundering of Flame, Thermal, and Arc Resistant Clothing |
ASTM F 1790/F1790M : 2015 | Standard Test Method for Measuring Cut Resistance of Materials Used in Protective Clothing with CPP Test Equipment |
ASTM F 955 : 2015 | Standard Test Method for Evaluating Heat Transfer through Materials for Protective Clothing Upon Contact with Molten Substances |
ASTM F 2407 : 2006 : R2013 : EDT 1 | Standard Specification for Surgical Gowns Intended for Use in Healthcare Facilities |
ASTM F 2731 : 2018 | Standard Test Method for Measuring the Transmitted and Stored Energy of Firefighter Protective Clothing Systems |
ASTM F 2299/F2299M : 2003 : R2017 | Standard Test Method for Determining the Initial Efficiency of Materials Used in Medical Face Masks to Penetration by Particulates Using Latex Spheres |
ASTM F 3050 : 2017 | Standard Guide for Conformity Assessment of Personal Protective Clothing and Equipment |
ASTM F 2757 : 2009 : R2016 | Standard Guide for Home Laundering Care and Maintenance of Flame, Thermal and Arc Resistant Clothing |
ASTM F 2704 : 2017 : REV A | Standard Specification for Air-Fed Protective Ensembles |
ASTM D 1518 : 2014 | Standard Test Method for Thermal Resistance of Batting Systems Using a Hot Plate (Withdrawn 2023) |
ASTM F 2010/F2010M : 2018 | Standard Test Method for Evaluation of Glove Effects on Wearer Finger Dexterity Using a Modified Pegboard Test |
ASTM F 1862/F1862M : 2017 | Standard Test Method for Resistance of Medical Face Masks to Penetration by Synthetic Blood (Horizontal Projection of Fixed Volume at a Known Velocity) |
ASTM F 2130 : 2011 : R2018 | Standard Test Method for Measuring Repellency, Retention, and Penetration of Liquid Pesticide Formulation Through Protective Clothing Materials (Withdrawn 2023) |
ASTM F 1383 : 2012 : EDT 1 | Standard Test Method for Permeation of Liquids and Gases through Protective Clothing Materials under Conditions of Intermittent Contact |
ASTM F 2675/F2675M : 2019 | Standard Test Method for Determining Arc Ratings of Hand Protective Products Developed and Used for Electrical Arc Flash Protection |
ASTM F 1819 : 2019 | Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood Using a Mechanical Pressure Technique |
ASTM F 1296 : 2008 : R2015 | Standard Guide for Evaluating Chemical Protective Clothing |
ASTM F 1002 : 2015 | Standard Performance Specification for Protective Clothing and Materials for Use by Workers Exposed to Specific Molten Substances and Related Thermal Hazards |
ASTM F 1494 : 2014 | Standard Terminology Relating to Protective Clothing |
ASTM F 2302 : 2019 | Standard Performance Specification for Labeling Protective Clothing Which Provides Resistance to Incidental Exposures to Heat or Open Flame |
ASTM F 1060 : 2018 | Standard Test Method for Evaluation of Conductive and Compressive Heat Resistance (CCHR) |
ASTM E 1542 : 2018 | Standard Terminology Relating to Occupational Health and Safety |
ASTM F 1458 : 2015 | Standard Test Method for Measurement of Cut Resistance to Chainsaw of Foot Protective Devices |
ASTM E 3108 : 2018 | Standard Practice for Conformity Assessment of Protective Gloves Worn by Law Enforcement and Corrections Officers |
ASTM F 2894 : 2019 | Standard Test Method for Evaluation of Materials, Protective Clothing, and Equipment for Heat Resistance Using a Hot Air Circulating Oven |
ASTM F 1358 : 2016 | Standard Test Method for Effects of Flame Impingement on Materials Used in Protective Clothing Not Designated Primarily for Flame Resistance |
ASTM F 2668 : 2016 | Standard Practice for Determining the Physiological Responses of the Wearer to Protective Clothing Ensembles |
ASTM F 2815 : 2010 : R2014 | Standard Practice for Chemical Permeation through Protective Clothing Materials: Testing Data Analysis by Use of a Computer Program (Withdrawn 2019) |
ASTM F 2621/F2621M : 2019 | Standard Practice for Determining Response Characteristics and Design Integrity of Arc Rated Finished Products and Evaluating other Products in an Electric Arc Exposure |
ASTM F 1414 : 2019 | Standard Test Method for Measurement of Cut Resistance to Chainsaw in Lower Body (Legs) Protective Clothing |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.