ASTM F 1537 : 2011 : REDLINE
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Wrought Cobalt-28Chromium-6Molybdenum Alloys for Surgical Implants (UNS R31537, UNS R31538, and UNS R31539)
20-06-2020
English
15-11-2011
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 13.01, 2015 Defines the chemical, mechanical, and metallurgical requirements for three wrought cobalt-28chromium-6molybdenum alloys used for surgical implants.
| Committee |
F 04
|
| DocumentType |
Redline
|
| Pages |
5
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
1.1 This specification covers the chemical, mechanical, and metallurgical requirements for three wrought cobalt-28chromium-6molybdenum alloys used for surgical implants. The properties specified apply specifically to wrought bar, rod, and wire.
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
| S.R. CWA 17253-2:2018 | JOINT IMPLANTS - PART 2: TIERED TOOLKIT APPROACH TO EVALUATE THE BIOLOGICAL IMPACT OF WEAR PARTICLES FROM JOINT REPLACEMENTS AND RELATED DEVICES |
| ASTM F 2068 : 2015 : REDLINE | Standard Specification for Femoral Prostheses—Metallic Implants |
| ASTM F 2665 : 2009 | Standard Specification for Total Ankle Replacement Prosthesis |
| ASTM F 1715 : 2000 | Standard Guide for Wear Assessment of Prosthetic Knee Designs in Simulator Devices |
| ASTM F 3213 : 2017 | Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Cobalt-28 Chromium-6 Molybdenum via Powder Bed Fusion |
| ASTM F 799 : 2011 : REDLINE | SPECIFICATION FOR COBALT-28CHROMIUM-6MOLYBDENUM ALLOY FORGINGS FOR SURGICAL IMPLANTS (UNS R31537, R31538, R31539) |
| ASTM F 1357 : 2014 : REDLINE | Standard Specification for Articulating Total Wrist Implants |
| ASTM F 2665 : 2009 : R2014 | Standard Specification for Total Ankle Replacement Prosthesis |
| ASTM F 2027 : 2016 : REDLINE | Standard Guide for Characterization and Testing of Raw or Starting Materials for Tissue-Engineered Medical Products |
| NBR 15752-1 : 2015 | IMPLANTS FOR ORTHOPEDICS - SHOULDER PROSTHESIS - PART 1: SPECIFICATIONS |
| NBR 15719 : 2016 | IMPLANTS FOR ORTHOPEDICS - HIP JOINT PROSTHESES - SPECIFICATION FOR ACETABULAR PROSTHESES |
| ASTM F 2887 : 2017 : REDLINE | Standard Specification for Total Elbow Prostheses |
| ASTM F 732 : 2017 : REDLINE | Standard Test Method for Wear Testing of Polymeric Materials Used in Total Joint Prostheses |
| ASTM F 2527 : 2016 : REDLINE | Standard Specification for Wrought Seamless and Welded and Drawn Cobalt Alloy Small Diameter Tubing for Surgical Implants (UNS R30003, UNS R30008, UNS R30035, UNS R30605, and UNS R31537) |
| ASTM F 1377 : 2013 : REDLINE | Standard Specification for Cobalt-28Chromium-6Molybdenum Powder for Coating of Orthopedic Implants (UNS R30075) |
| ASTM F 3018 : 2017 | Standard Guide for Assessment of Hard-on-Hard Articulation Total Hip Replacement and Hip Resurfacing Arthroplasty Devices |
| ASTM F 543 : 2017 : REDLINE | Standard Specification and Test Methods for Metallic Medical Bone Screws |
| ASTM F 2886 : 2017 : REDLINE | Standard Specification for Metal Injection Molded Cobalt-28Chromium-6Molybdenum Components for Surgical Implant Applications |
| ASTM F 3047M : 2015 | Standard Guide for High Demand Hip Simulator Wear Testing of Hard-on-hard Articulations |
| ASTM F 2091 : 2015 : REDLINE | Standard Specification for Acetabular Prostheses |
| ASTM F 2083 : 2012 : REDLINE | Standard Specification for Knee Replacement Prosthesis |
| NBR 15676-1 : 2017 | ORTHOPEDIC IMPLANTS - METALLIC BONE PLATES - PART 1: REQUIREMENTS |
| SAE AMS2248H | Chemical Check Analysis Limits, Corrosion- and Heat-Resistant Steels and Alloys, Maraging and Other Highly Alloyed Steels, and Iron Alloys |
| SAE AMS 2269 : 2006 | CHEMICAL CHECK ANALYSIS LIMITS, NICKEL, NICKEL ALLOYS, AND COBALT ALLOYS |
| SAE AMS2630C | Inspection, Ultrasonic Product Over 0.5 Inch (12.7 mm) Thick |
| ISO 6892:1998 | Metallic materials Tensile testing at ambient temperature |
| ISO 9001:2015 | Quality management systems — Requirements |
| ASTM E 8 : 2004 | Standard Test Methods for Tension Testing of Metallic Materials |
| ASTM F 799 : 2011 : REDLINE | SPECIFICATION FOR COBALT-28CHROMIUM-6MOLYBDENUM ALLOY FORGINGS FOR SURGICAL IMPLANTS (UNS R31537, R31538, R31539) |
| ISO 5832-12:2007 | Implants for surgery Metallic materials Part 12: Wrought cobalt-chromium-molybdenum alloy |
| ASTM E 354 : 2014 : REDLINE | Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.