ASTM F 1586 : 2013 : EDT 1
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Wrought Nitrogen Strengthened 21Chromium-10Nickel-3Manganese-2.5Molybdenum Stainless Steel Alloy Bar for Surgical Implants (UNS S31675)
Hardcopy , PDF
23-09-2021
English
20-08-2013
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 13.01, 2015 Defines the chemical, mechanical, and metallurgical requirements for wrought nitrogen strengthened 21chromium - 10nickel - 3manganese - 2.5molybdenum stainless steel alloy bar for surgical implants.
| Committee |
F 04
|
| DevelopmentNote |
Supersedes ASTM F 1586/F1586M. (08/2013)
|
| DocumentType |
Standard
|
| Pages |
5
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This specification covers the chemical, mechanical, and metallurgical requirements for wrought nitrogen strengthened 21chromium—10nickel—3manganese—2.5molybdenum stainless steel alloy bar for surgical implants.
1.2The values stated in either inch-pound units or SI units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
| ASTM F 2068 : 2015 : REDLINE | Standard Specification for Femoral Prostheses—Metallic Implants |
| ASTM F 2181 : 2014 : REDLINE | Standard Specification for Wrought Seamless Stainless Steel Tubing for Surgical Implants |
| ASTM F 2581 : 2012 | Standard Specification for Wrought Nitrogen Strengthened 11Manganese-17Chromium-3Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29225) |
| ASTM F 2229 : 2012 | Standard Specification for Wrought, Nitrogen Strengthened 23Manganese-21Chromium-1Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29108) |
| ASTM F 2181 : 2014 | Standard Specification for Wrought Seamless Stainless Steel Tubing for Surgical Implants |
| ASTM F 2068 : 2015 | Standard Specification for Femoral Prostheses—Metallic Implants (Withdrawn 2023) |
| 11/30197571 DC : 0 | BS ISO 25832-1 - IMPLANTS FOR SURGERY - SEAMLESS TUBES FOR SURGICAL IMPLANTS - PART 1: MATERIALS BASED ON IRON |
| ASTM F 2581 : 2012 : R2017 | Standard Specification for Wrought Nitrogen Strengthened 11Manganese-17Chromium-3Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29225) |
| ASTM F 543 : 2017 | Standard Specification and Test Methods for Metallic Medical Bone Screws |
| ASTM F 543 : 2017 : REDLINE | Standard Specification and Test Methods for Metallic Medical Bone Screws |
| ASTM F 2229 : 2012 : REDLINE | Standard Specification for Wrought, Nitrogen Strengthened 23Manganese-21Chromium-1Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29108) |
| ASTM F 621 : 2012 : R2017 | Standard Specification for Stainless Steel Forgings for Surgical Implants |
| ASTM F 621 : 2012 : R2021 : EDT 1 | Standard Specification for Stainless Steel Forgings for Surgical Implants |
| ASTM F 2229 : 2021 | Standard Specification for Wrought, Nitrogen Strengthened 23Manganese-21Chromium-1Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29108) |
| ASTM F 2181 : 2020 | Standard Specification for Wrought Seamless Stainless Steel Tubing for Surgical Implants |
| ASTM F 621 : 2012 | Standard Specification for Stainless Steel Forgings for Surgical Implants |
| NBR 15676-1 : 2017 | ORTHOPEDIC IMPLANTS - METALLIC BONE PLATES - PART 1: REQUIREMENTS |
| ASTM F 746 : 2004 : R2014 | Standard Test Method for Pitting or Crevice Corrosion of Metallic Surgical Implant Materials |
| SAE AMS2248H | Chemical Check Analysis Limits, Corrosion- and Heat-Resistant Steels and Alloys, Maraging and Other Highly Alloyed Steels, and Iron Alloys |
| ASTM A 262 : 2015 : REDLINE | Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels |
| ASTM E 29 : 2002 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
| ASTM E 45 : 1997 : EDT 2 | Standard Test Methods for Determining the Inclusion Content of Steel |
| ASTM E 10 : 2001 | Standard Test Method for Brinell Hardness of Metallic Materials |
| ASTM A 262 : 2001 | Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels |
| ISO 6892:1998 | Metallic materials Tensile testing at ambient temperature |
| ASTM E 10 : 2017-05 | TEST METHOD FOR BRINELL HARDNESS OF METALLIC MATERIALS |
| IEEE/ASTM SI_10-2010 | American National Standard for Metric Practice |
| ASTM A 262 : 1998 | Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels |
| ASTM F 746 : 2004 : R2021 | Standard Test Method for Pitting or Crevice Corrosion of Metallic Surgical Implant Materials |
| ISO 9001:2015 | Quality management systems — Requirements |
| ASTM E 8 : 2004 | Standard Test Methods for Tension Testing of Metallic Materials |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.