• There are no items in your cart

ASTM F 2083 : 2012

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

Standard Specification for Knee Replacement Prosthesis

Available format(s)

Hardcopy , PDF

Superseded date

07-12-2023

Superseded by

ASTM F 2083 : 2021

Language(s)

English

Published date

15-04-2013

€67.30
Excluding VAT

Committee
F 04
DocumentType
Standard
Pages
9
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

1.1This specification is intended to cover all the widely used generic types of knee replacement prostheses used to provide functioning articulation. This includes total knee replacement (TKR) and unicondylar knee replacement (UKR) prostheses of both fixed and mobile bearing varieties, and for primary or revision surgeries. Although a patellar component may be considered an integral part of a TKR, the detailed description of this component is excluded here since it is provided in Specification F1672.

1.2Included within the scope of this specification are replaceable components of modular designs, for example, tibial articulating surfaces and all components labeled for, or capable of, being used with cement, regardless of whether the same components can also be used without cement.

1.3This specification is intended to provide basic descriptions of material and prosthesis geometry. Additionally, those characteristics determined to be important to in vivo performance of the prosthesis are defined. However, compliance with this specification does not itself define a device that will provide adequate clinical performance.

1.4Excluded from the scope are hemiarthroplasty devices that replace only the femoral or tibial surface, but not both; and patellofemoral prostheses. Also excluded are devices designed for custom applications.

1.5The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

ASTM F 1223 : 2020 Standard Test Method for Determination of Total Knee Replacement Constraint
ASTM F 1223 : 2014 Standard Test Method for Determination of Total Knee Replacement Constraint
ASTM F 2777 : 2016 Standard Test Method for Evaluating Knee Bearing (Tibial Insert) Endurance and Deformation Under High Flexion
ASTM F 2722 : 2015 Standard Practice for Evaluating Mobile Bearing Knee Tibial Baseplate Rotational Stops
ASTM F 3140 : 2017 Standard Test Method for Cyclic Fatigue Testing of Metal Tibial Tray Components of Unicondylar Knee Joint Replacements

ASTM F 2723 : 2008 Standard Test Method for Evaluating Mobile Bearing Knee Tibial Baseplate/Bearing Resistance to Dynamic Disassociation
ASTM F 1044 : 2005 : R2011 : EDT 1 Standard Test Method for Shear Testing of Calcium Phosphate Coatings and Metallic Coatings
ASTM F 1160 : 2005 : R2011 : EDT 1 Standard Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/Metallic Coatings
ASTM F 1223 : 2004 : REV A Standard Test Method for Determination of Total Knee Replacement Constraint
ASTM F 1672 : 2014 Standard Specification for Resurfacing Patellar Prosthesis
ASTM F 1223 : 2004 Standard Test Method for Determination of Total Knee Replacement Constraint
ASTM F 1377 : 1998 : REV A Standard Specification for Cobalt-28 Chromium-6 Molybdenum Powder for Coating of Orthopedic Implants (UNS-R30075)
ASTM F 1580 : 1995 Standard Specification for Titanium and Titanium-6 Aluminum-4 Vanadium Alloy Powders for Coatings of Surgical Implants
ASTM F 1800 : 2019 : EDT 1 Standard Practice for Cyclic Fatigue Testing of Metal Tibial Tray Components of Total Knee Joint Replacements
ASTM F 1672 : 2014 : R2019 Standard Specification for Resurfacing Patellar Prosthesis (Withdrawn 2023)
ASTM F 1223 : 2008 : R2012 Standard Test Method for Determination of Total Knee Replacement Constraint
ASTM F 1108 : 2002 Standard Specification for Titanium-6Aluminum-4Vanadium Alloy Castings for Surgical Implants (UNS R56406)
ASTM F 1537 : 2011 Standard Specification for Wrought Cobalt-28Chromium-6Molybdenum Alloys for Surgical Implants (UNS R31537, UNS R31538, and UNS R31539)
ASTM F 1472 : 2002 : REV A Standard Specification for Wrought Titanium -6Aluminum -4Vanadium Alloy for Surgical Implant Applications (UNS R56400)
ASTM F 1108 : 1997 : REV A Standard Specification for Ti6Al4V Alloy Castings for Surgical Implants (UNS R56406)
ASTM F 1160 : 2005 Standard Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/Metallic Coatings
ASTM F 1108 : 2004 : R2009 Standard Specification for Titanium-6Aluminum-4Vanadium Alloy Castings for Surgical Implants (UNS R56406)
ASTM F 1108 : 2004 Standard Specification for Titanium-6Aluminum-4Vanadium Alloy Castings for Surgical Implants (UNS R56406)
ASTM F 1147 : 1999 Standard Test Method for Tension Testing of Calcium Phosphate and Metal Coatings
ASTM F 1147 : 2005 : R2011 Standard Test Method for Tension Testing of Calcium Phosphate and Metallic Coatings
ASTM F 2384 : 2010 Standard Specification for Wrought Zirconium-2.5Niobium Alloy for Surgical Implant Applications (UNS R60901)
ASTM F 1044 : 2005 : R2017 : EDT 1 Standard Test Method for Shear Testing of Calcium Phosphate Coatings and Metallic Coatings
ASTM F 1814 : 1997 : REV A Standard Guide for Evaluating Modular Hip and Knee Joint Components
ASTM F 1472 : 2000 Standard Specification for Wrought Titanium -6Aluminum -4Vanadium Alloy (UNS R56400) for Surgical Implant Applications
ASTM F 2722 : 2008 Standard Test Method for Evaluating Mobile Bearing Knee Tibial Baseplate Rotational Stops
ASTM F 1147 : 2005 Standard Test Method for Tension Testing of Calcium Phosphate and Metal Coatings
ASTM F 1108 : 2014 Standard Specification for Titanium-6Aluminum-4Vanadium Alloy Castings for Surgical Implants (UNS R56406)
ASTM F 1160 : 2000 : EDT 1 Standard Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/Metallic Coatings
ASTM F 1800 : 1997 Standard Test Method for Cyclic Fatigue Testing of Metal Tibial Tray Components of Total Knee Joint Replacements
ASTM F 2777 : 2010 Standard Test Method for Evaluating Knee Bearing (Tibial Insert) Endurance and Deformation Under High Flexion
ASTM F 2384 : 2010 : R2016 Standard Specification for Wrought Zirconium-2.5Niobium Alloy for Surgical Implant Applications (UNS R60901)
ASTM F 1537 : 2008 Standard Specification for Wrought Cobalt-28Chromium-6Molybdenum Alloys for Surgical Implants (UNS R31537, UNS R31538, and UNS R31539)
ASTM F 1223 : 2014 Standard Test Method for Determination of Total Knee Replacement Constraint
ASTM F 1223 : 2003 Standard Test Method for Determination of Total Knee Replacement Constraint
ASTM F 1580 : 2018 Standard Specification for Titanium and Titanium-6 Aluminum-4 Vanadium Alloy Powders for Coatings of Surgical Implants
ASTM F 1537 : 2007 Standard Specification for Wrought Cobalt-28Chromium-6Molybdenum Alloys for Surgical Implants (UNS R31537, UNS R31538, and UNS R31539)
ASTM F 1377 : 2013 Standard Specification for Cobalt-28Chromium-6Molybdenum Powder for Coating of Orthopedic Implants (UNS R30075)
ASTM F 1472 : 2008 Standard Specification for Wrought Titanium-6Aluminum-4Vanadium Alloy for Surgical Implant Applications (UNS R56400)
ASTM F 1377 : 2004 Standard Specification for Cobalt-28Chromium-6Molybdenum Powder for Coating of Orthopedic Implants (UNS R30075)
ASTM F 1223 : 2005 Standard Test Method for Determination of Total Knee Replacement Constraint
ASTM F 1800 : 2019 Standard Practice for Cyclic Fatigue Testing of Metal Tibial Tray Components of Total Knee Joint Replacements
ASTM F 2723 : 2013 Standard Test Method for Evaluating Mobile Bearing Knee Tibial Baseplate/Bearing Resistance to Dynamic Disassociation
ASTM F 1814 : 2015 Standard Guide for Evaluating Modular Hip and Knee Joint Components
ASTM F 1044 : 1999 Standard Test Method for Shear Testing of Calcium Phosphate Coatings and Metallic Coatings
ASTM F 2723 : 2013 : REV A Standard Test Method for Evaluating Mobile Bearing Knee Tibial Baseplate/Bearing Resistance to Dynamic Disassociation
ASTM F 1672 : 1995 : R2005 Standard Specification for Resurfacing Patellar Prosthesis
ASTM F 1672 : 1995 : R2000 Standard Specification for Resurfacing Patellar Prosthesis
ASTM F 1472 : 2014 Standard Specification for Wrought Titanium-6Aluminum-4Vanadium Alloy for Surgical Implant Applications (UNS R56400)
ASTM F 1800 : 2004 Standard Test Method for Cyclic Fatigue Testing of Metal Tibial Tray Components of Total Knee Joint Replacements
ASTM F 1537 : 2020 Standard Specification for Wrought Cobalt-28Chromium-6Molybdenum Alloys for Surgical Implants (UNS R31537, UNS R31538, and UNS R31539)
ASTM F 1800 : 2007 Standard Test Method for Cyclic Fatigue Testing of Metal Tibial Tray Components of Total Knee Joint Replacements
ASTM F 1160 : 2014 Standard Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/Metallic Coatings
ASTM F 1672 : 1995 : EDT 1 Standard Specification for Resurfacing Patellar Prosthesis
ASTM F 1580 : 2007 Standard Specification for Titanium and Titanium-6 Aluminum-4 Vanadium Alloy Powders for Coatings of Surgical Implants
ASTM F 2384 : 2005 Standard Specification for Wrought Zirconium-2.5Niobium Alloy for Surgical Implant Applications (UNS R60901)
ASTM F 2724 : 2008 Standard Test Method for Evaluating Mobile Bearing Knee Dislocation
ASTM F 1580 : 2001 Standard Specification for Titanium and Titanium-6 Aluminum-4 Vanadium Alloy Powders for Coatings of Surgical Implants
ASTM F 1472 : 1999 Standard Specification for Wrought Titanium -6Aluminum -4Vanadium Alloy (UNS R56400) for Surgical Implant Applications
ASTM F 1160 : 2014 : R2017 : EDT 1 Standard Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/Metallic Coatings
ASTM F 1814 : 1997 : REV A : R2003 Standard Guide for Evaluating Modular Hip and Knee Joint Components
ASTM F 1537 : 2000 Standard Specification for Wrought Cobalt-28-Chromium-6-Molybdenum Alloy for Surgical Implants (UNS R31537, UNS R31538, and UNS R31539)
ASTM F 1160 : 2000 Standard Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/Metallic Coatings
ASTM F 1377 : 2008 Standard Specification for Cobalt-28Chromium-6Molybdenum Powder for Coating of Orthopedic Implants (UNS R30075)
ASTM F 1800 : 2012 Standard Practice for Cyclic Fatigue Testing of Metal Tibial Tray Components of Total Knee Joint Replacements
ASTM F 1814 : 1997 : REV A : R2009 Standard Guide for Evaluating Modular Hip and Knee Joint Components
ASTM F 1147 : 2005 : R2017 : EDT 1 Standard Test Method for Tension Testing of Calcium Phosphate and Metallic Coatings
ASTM F 2724 : 2008 : R2014 Standard Test Method for Evaluating Mobile Bearing Knee Dislocation
ASTM F 1223 : 1996 Standard Test Method for Determination of Total Knee Replacement Constraint
ASTM F 1044 : 2005 Standard Test Method for Shear Testing of Calcium Phosphate Coatings and Metallic Coatings
ASTM F 1223 : 2001 Standard Test Method for Determination of Total Knee Replacement Constraint
ASTM F 1472 : 2008 : EDT 1 Standard Specification for Wrought Titanium-6Aluminum-4Vanadium Alloy for Surgical Implant Applications (UNS R56400)
ASTM F 1580 : 2012 Standard Specification for Titanium and Titanium-6 Aluminum-4 Vanadium Alloy Powders for Coatings of Surgical Implants
ASTM F 2777 : 2016 Standard Test Method for Evaluating Knee Bearing (Tibial Insert) Endurance and Deformation Under High Flexion
ASTM F 1672 : 1995 : R2011 Standard Specification for Resurfacing Patellar Prosthesis
ASTM F 1223 : 2008 Standard Test Method for Determination of Total Knee Replacement Constraint
ASTM F 2722 : 2015 Standard Practice for Evaluating Mobile Bearing Knee Tibial Baseplate Rotational Stops

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.