ASTM F 2083 : 2021
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Standard Specification for Knee Replacement Prosthesis (Withdrawn 2023)
Hardcopy , PDF
03-02-2021
English
03-02-2021
Committee |
F 04
|
DocumentType |
Standard
|
Pages |
10
|
PublisherName |
American Society for Testing and Materials
|
Status |
Withdrawn
|
Supersedes |
1.1This specification is intended to cover all the widely used generic types of knee replacement prostheses used to provide functioning articulation. This includes total knee replacement (TKR) and unicondylar knee replacement (UKR) prostheses of both fixed and mobile bearing varieties, and for primary or revision surgeries. Although a patellar component may be considered an integral part of a TKR, the detailed description of this component is excluded here since it is provided in Specification F1672.
1.2Included within the scope of this specification are replaceable components of modular designs, for example, tibial articulating surfaces and all components labeled for, or capable of, being used with cement, regardless of whether the same components can also be used without cement.
1.3This specification is intended to provide basic descriptions of material and prosthesis geometry. Additionally, those characteristics determined to be important to in-vivo performance of the prosthesis are defined. However, compliance with this specification does not itself define a device that will provide adequate clinical performance.
1.4Excluded from the scope are hemiarthroplasty devices that replace only the femoral or tibial surface, but not both; and patellofemoral prostheses. Also excluded are devices designed for custom applications.
1.5The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.6This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.7This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM F 3140 : 2023 | Standard Test Method for Cyclic Fatigue Testing of Metal Tibial Tray Components of Unicondylar Knee Joint Replacements |
ASTM F 2777 : 2023 | Standard Test Method for Evaluating Knee Bearing (Tibial Insert) Endurance and Deformation Under High Flexion |
ASTM F 3210 : 2022 : EDT 1 | Standard Test Method for Fatigue Testing of Total Knee Femoral Components Under Closing Conditions |
ASTM F 2665 : 2021 | Standard Specification for Total Ankle Replacement Prosthesis |
ASTM F 3495 : 2023 | Standard Test Methods for Determining the Static Failure Load of Ceramic Knee Femoral Components |
ASTM F 2777 : 2016 | Standard Test Method for Evaluating Knee Bearing (Tibial Insert) Endurance and Deformation Under High Flexion |
ASTM F 3140 : 2017 | Standard Test Method for Cyclic Fatigue Testing of Metal Tibial Tray Components of Unicondylar Knee Joint Replacements |
ASTM F 1223 : 2020 | Standard Test Method for Determination of Total Knee Replacement Constraint |
ASTM F 1800 : 2019 : EDT 1 | Standard Practice for Cyclic Fatigue Testing of Metal Tibial Tray Components of Total Knee Joint Replacements |
ASTM F 2722 : 2015 | Standard Practice for Evaluating Mobile Bearing Knee Tibial Baseplate Rotational Stops |
ASTM F 746 : 2004 : R2014 | Standard Test Method for Pitting or Crevice Corrosion of Metallic Surgical Implant Materials |
ASTM F 562 : 2022 | Standard Specification for Wrought 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy for Surgical Implant Applications (UNS R30035) |
ASTM F 2003 : 2002 : R2022 | Standard Practice for Accelerated Aging of Ultra-High Molecular Weight Polyethylene After Gamma Irradiation in Air |
ASTM F 2503 : 2023 | Standard Practice for Marking Medical Devices and Other Items for Safety in the Magnetic Resonance Environment |
ASTM F 75 : 2023 | Standard Specification for Cobalt-28 Chromium-6 Molybdenum Alloy Castings and Casting Alloy for Surgical Implants (UNS R30075) |
ASTM F 1472 : 2023 | Standard Specification for Wrought Titanium-6Aluminum-4Vanadium Alloy for Surgical Implant Applications (UNS R56400) |
ASTM F 75 : 2018 | Standard Specification for Cobalt-28 Chromium-6 Molybdenum Alloy Castings and Casting Alloy for Surgical Implants (UNS R30075) |
ASTM F 562 : 2013 | Standard Specification for Wrought 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy for Surgical Implant Applications (UNS R30035) |
ASTM F 2003 : 2002 : R2015 | Standard Practice for Accelerated Aging of Ultra-High Molecular Weight Polyethylene after Gamma Irradiation in Air |
ASTM F 2503 : 2023 : EDT 1 | Standard Practice for Marking Medical Devices and Other Items for Safety in the Magnetic Resonance Environment |
ASTM F 3141 : 2023 | Standard Guide for Total Knee Replacement Loading Profiles |
ASTM F 86 : 2013 | Standard Practice for Surface Preparation and Marking of Metallic Surgical Implants |
ASTM F 2722 : 2021 | Standard Practice for Evaluating Mobile Bearing Knee Tibial Baseplate Rotational Stops |
ASTM F 1377 : 2021 | Standard Specification for Cobalt-28Chromium-6Molybdenum Powder for Medical Devices (UNS R30075, UNS R31537, and UNS R31538) |
ASTM F 451 : 2016 | Standard Specification for Acrylic Bone Cement |
ASTM F 1472 : 2000 | Standard Specification for Wrought Titanium -6Aluminum -4Vanadium Alloy (UNS R56400) for Surgical Implant Applications |
ASTM F 1108 : 2014 | Standard Specification for Titanium-6Aluminum-4Vanadium Alloy Castings for Surgical Implants (UNS R56406) |
ASTM F 2724 : 2021 | Standard Test Method for Evaluating Mobile Bearing Knee Dislocation |
ASTM F 451 : 2021 | Standard Specification for Acrylic Bone Cement |
ASTM F 1223 : 2003 | Standard Test Method for Determination of Total Knee Replacement Constraint |
ASTM E 739 : 2023 | Standard Guide for Statistical Analysis of Linear or Linearized Stress-Life (<emph type="bdit">S-N</emph>) and Strain-Life (ε-<emph type="bdit" >N</emph>) Fatigue Data (Withdrawn 2024) |
ASTM F 136 : 1998 | Standard Specification for Wrought Titanium-6 Aluminum-4 Vanadium ELI (Extra Low Interstitial) Alloy (UNS R56401) for Surgical Implant Applications |
ASTM F 3141 : 2017 : REV A | Standard Guide for Total Knee Replacement Loading Profiles |
ASTM F 1377 : 2013 | Standard Specification for Cobalt-28Chromium-6Molybdenum Powder for Coating of Orthopedic Implants (UNS R30075) |
ASTM F 1472 : 2020 : REV A | Standard Specification for Wrought Titanium-6Aluminum-4Vanadium Alloy for Surgical Implant Applications (UNS R56400) |
ASTM F 2503 : 2020 | Standard Practice for Marking Medical Devices and Other Items for Safety in the Magnetic Resonance Environment |
ASTM F 2723 : 2021 | Standard Test Method for Evaluating Mobile Bearing Knee Tibial Baseplate/Bearing Resistance to Dynamic Disassociation |
ASTM F 1814 : 2015 | Standard Guide for Evaluating Modular Hip and Knee Joint Components |
ASTM F 2723 : 2013 : REV A | Standard Test Method for Evaluating Mobile Bearing Knee Tibial Baseplate/Bearing Resistance to Dynamic Disassociation |
ASTM F 648 : 2014 | Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants |
ASTM E 739 : 2010 : R2015 | Standard Practice for Statistical Analysis of Linear or Linearized Stress-Life (<emph type="bdit">S-N</emph>) and Strain-Life (ε-<emph type="bdit" >N</emph>) Fatigue Data |
ASTM F 981 : 2004 : R2016 | Standard Practice for Assessment of Compatibility of Biomaterials for Surgical Implants with Respect to Effect of Materials on Muscle and Insertion into Bone |
ASTM F 746 : 2004 : R2021 | Standard Test Method for Pitting or Crevice Corrosion of Metallic Surgical Implant Materials |
ASTM F 90 : 2023 | Standard Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy for Surgical Implant Applications (UNS R30605) |
ASTM F 648 : 2021 | Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants |
ASTM F 86 : 2021 | Standard Practice for Surface Preparation and Marking of Metallic Surgical Implants |
ASTM F 3140 : 2023 | Standard Test Method for Cyclic Fatigue Testing of Metal Tibial Tray Components of Unicondylar Knee Joint Replacements |
ASTM F 2777 : 2023 | Standard Test Method for Evaluating Knee Bearing (Tibial Insert) Endurance and Deformation Under High Flexion |
ASTM F 2724 : 2008 : R2014 | Standard Test Method for Evaluating Mobile Bearing Knee Dislocation |
ASTM F 1108 : 2021 | Standard Specification for Titanium-6Aluminum-4Vanadium Alloy Castings for Surgical Implants (UNS R56406) |
ASTM F 136 : 2013 | Standard Specification for Wrought Titanium-6Aluminum-4Vanadium ELI (Extra Low Interstitial) Alloy for Surgical Implant Applications (UNS R56401) |
ASTM F 136 : 2013 : R2021 : EDT 1 | Standard Specification for Wrought Titanium-6Aluminum-4Vanadium ELI (Extra Low Interstitial) Alloy for Surgical Implant Applications (UNS R56401) |
ASTM F 1814 : 2022 | Standard Guide for Evaluating Modular Hip and Knee Joint Components |
ASTM F 981 : 2023 | Standard Practice for Assessment of Muscle and Bone Tissue Responses to Long-Term Implantable Materials Used in Medical Devices |
ASTM F 90 : 2014 | Standard Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy for Surgical Implant Applications (UNS R30605) |
ASTM F 2722 : 2015 | Standard Practice for Evaluating Mobile Bearing Knee Tibial Baseplate Rotational Stops |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.