![header thumbnail](/images/publishers\astm_cover.gif)
ASTM F 2150 : 2013
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
![header thumbnail](/images/publishers\astm_cover.gif)
Standard Guide for Characterization and Testing of Biomaterial Scaffolds Used in Tissue-Engineered Medical Products
Hardcopy , PDF
27-08-2020
English
01-10-2013
This guide is a resource of currently available test methods for the characterization of the compositional and structural aspects of biomaterial scaffolds used to develop and manufacture tissue-engineered medical products (TEMPs).
Committee |
F 04
|
DocumentType |
Guide
|
Pages |
12
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This guide is a resource of currently available test methods for the characterization of the compositional and structural aspects of biomaterial scaffolds used to develop and manufacture tissue-engineered medical products (TEMPs).
1.2The test methods contained herein guide characterization of the bulk physical, chemical, mechanical, and surface properties of a scaffold construct. Such properties may be important for the success of a TEMP, especially if they affect cell retention, activity and organization, the delivery of bioactive agents, or the biocompatibility and bioactivity within the final product.
1.3This guide may be used in the selection of appropriate test methods for the generation of an original equipment manufacture (OEM) specification. This guide also may be used to characterize the scaffold component of a finished medical product.
1.4This guide is intended to be utilized in conjunction with appropriate characterization(s) and evaluation(s) of any raw or starting material(s) utilized in the fabrication of the scaffold, such as described in Guide F2027.
1.5This guide addresses natural, synthetic, or combination scaffold materials with or without bioactive agents or biological activity. This guide does not address the characterization or release profiles of any biomolecules, cells, drugs, or bioactive agents that are used in combination with the scaffold. A determination of the suitability of a particular starting material and/or finished scaffold structure to a specific cell type and/or tissue engineering application is essential, but will require additional in vitro and/or in vivo evaluations considered to be outside the scope of this guide.
1.6This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.
ASTM F 2900 : 2011 | Standard Guide for Characterization of Hydrogels used in Regenerative Medicine (Withdrawn 2020) |
ASTM F 2211 : 2013 | Standard Classification for Tissue Engineered Medical Products (TEMPs) |
ASTM F 2721 : 2009 : R2014 | Standard Guide for Pre-clinical <emph type="bdit">in vivo</emph> Evaluation in Critical Size Segmental Bone Defects |
ASTM F 2998 : 2014 | Guide for Using Fluorescence Microscopy to Quantify the Spread Area of Fixed Cells (Withdrawn 2023) |
ASTM F 2903 : 2011 | Standard Guide for Tissue Engineered Medical Products (TEMPs) for Reinforcement of Tendon and Ligament Surgical Repair (Withdrawn 2020) |
ASTM F 2603 : 2006 : R2012 | Standard Guide for Interpreting Images of Polymeric Tissue Scaffolds |
ASTM F 3163 : 2016 | Standard Guide for Classification of Cellular and/or Tissue-Based Products (CTPs) for Skin Wounds |
ASTM F 2450 : 2018 | Standard Guide for Assessing Microstructure of Polymeric Scaffolds for Use in Tissue-Engineered Medical Products |
ASTM F 2027 : 2016 | Standard Guide for Characterization and Testing of Raw or Starting Materials for Tissue-Engineered Medical Products |
ASTM F 2884 : 2012 | Standard Guide for Pre-clinical <emph type="bdit">in vivo</emph> Evaluation of Spinal Fusion (Withdrawn 2021) |
ASTM F 3223 : 2017 | Standard Guide for Characterization and Assessment of Tissue Engineered Medical Products (TEMPs) for Knee Meniscus Surgical Repair and/or Reconstruction |
ASTM F 2883 : 2011 | Standard Guide for Characterization of Ceramic and Mineral Based Scaffolds used for Tissue-Engineered Medical Products (TEMPs) and as Device for Surgical Implant Applications (Withdrawn 2020) |
ASTM F 3225 : 2017 | Standard Guide for Characterization and Assessment of Vascular Graft Tissue Engineered Medical Products (TEMPs) |
ASTM D 6420 : 1999 : R2010 | Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry |
ASTM D 2857 : 2016 | Standard Practice for Dilute Solution Viscosity of Polymers |
ASTM D 4001 : 1993 : R2006 | Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers By Light Scattering |
ASTM D 1708 : 1996 | Standard Test Method for Tensile Properties of Plastics By Use of Microtensile Specimens |
ASTM D 4603 : 2003 | Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer |
ASTM F 1980 : 2007 : R2011 | Standard Guide for Accelerated Aging of Sterile Barrier Systems for Medical Devices |
ASTM D 4001 : 2013 | Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers By Light Scattering |
ASTM D 1238 : 2000 | Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer |
ASTM D 1238 : 2004 : REV C | Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer |
ASTM F 1983 : 1999 : R2008 | Standard Practice for Assessment of Compatibility of Absorbable/Resorbable Biomaterials for Implant Applications |
ASTM E 1642 : 2000 : R2016 | Standard Practice for General Techniques of Gas Chromatography Infrared (GC/IR) Analysis |
ASTM F 2027 : 2000 | Standard Guide for Characterization and Testing of Substrate Materials for Tissue-Engineered Medical Products |
ASTM E 1994 : 2009R | Standard Practice for Use of Process Oriented AOQL and LTPD Sampling Plans |
ASTM D 1708 : 2006 : REV A | Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens |
ASTM D 3418 : 2012 : EDT 1 | Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry |
ASTM D 3016 : 1997 : R2010 | Standard Practice for Use of Liquid Exclusion Chromatography Terms and Relationships |
ASTM E 1994 : 2008 | Standard Practice for Use of Process Oriented AOQL and LTPD Sampling Plans |
ASTM D 2857 : 1995 : R2001 | Standard Practice for Dilute Solution Viscosity of Polymers |
ASTM F 1983 : 1999 : R2003 | Standard Practice for Assessment of Compatibiltiy of Absorbable/Resorbable Biomaterials for Implant Applications |
ASTM D 3418 : 1982 : R1988 : EDT 1 | Standard Test Method for Transition Temperatures of Polymers By Thermal Analysis |
ASTM E 1829 : 2014 | Standard Guide for Handling Specimens Prior to Surface Analysis |
ASTM F 1884 : 1998 | Standard Test Method for Determining Residual Solvents in Packaging Materials |
ASTM D 6539 : 2000 : R2006 : EDT 1 | Standard Test Method for Measurement of Pneumatic Permeability of Partially Saturated Porous Materials by Flowing Air |
ASTM F 1249 : 2006 | Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor |
ASTM F 2025 : 2000 | Standard Practice for Gravimetric Measurement of Polymeric Components for Wear Assessment |
ASTM E 1142 : 2011 : REV A | Standard Terminology Relating to Thermophysical Properties |
ASTM D 3418 : 1999 | Standard Test Method for Transition Temperatures of Polymers By Differential Scanning Calorimetry |
ASTM D 2857 : 1995 | Standard Practice for Dilute Solution Viscosity of Polymers |
ASTM F 2450 : 2009 | Standard Guide for Assessing Microstructure of Polymeric Scaffolds for Use in Tissue Engineered Medical Products |
ASTM E 1142 : 2012 | Standard Terminology Relating to Thermophysical Properties |
ASTM D 1238 : 2013 | Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer |
ASTM D 1621 : 2010 | Standard Test Method for Compressive Properties Of Rigid Cellular Plastics |
ASTM E 1078 : 2002 | Standard Guide for Specimen Preparation and Mounting in Surface Analysis |
ASTM D 4001 : 1993 : R1999 | Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers By Light Scattering |
ASTM F 2025 : 2006 : R2012 | Standard Practice for Gravimetric Measurement of Polymeric Components for Wear Assessment |
ASTM D 5296 : 2005 | Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography |
ASTM E 1142 : 1997 | Standard Terminology Relating to Thermophysical Properties |
ASTM F 2312 : 2004 | Standard Terminology Relating to Tissue Engineered Medical Products |
ASTM E 1078 : 1997 | Standard Guide for Procedures for Specimen Preparation and Mounting in Surface Analysis |
ASTM D 6474 : 1999 : R2006 | Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography |
ASTM F 2212 : 2011 | Standard Guide for Characterization of Type I Collagen as Starting Material for Surgical Implants and Substrates for Tissue Engineered Medical Products (TEMPs) |
ASTM D 1238 : 2010 | Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer |
ASTM D 6579 : 2011 : R2015 | Standard Practice for Molecular Weight Averages and Molecular Weight Distribution of Hydrocarbon, Rosin and Terpene Resins by Size-Exclusion Chromatography |
ASTM F 2900 : 2011 | Standard Guide for Characterization of Hydrogels used in Regenerative Medicine (Withdrawn 2020) |
ASTM E 1142 : 2013 | Standard Terminology Relating to Thermophysical Properties |
ASTM D 5296 : 1997 | Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography |
ASTM F 1249 : 1994 : REV B | Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor |
ASTM E 1142 : 2004 | Standard Terminology Relating to Thermophysical Properties |
ASTM D 1708 : 2002 | Standard Test Method for Tensile Properties of Plastics By Use of Microtensile Specimens |
ASTM F 2027 : 2016 | Standard Guide for Characterization and Testing of Raw or Starting Materials for Tissue-Engineered Medical Products |
ASTM D 1042 : 2006 | Standard Test Method for Linear Dimensional Changes of Plastics Under Accelerated Service Conditions |
ASTM F 1980 : 2007 | Standard Guide for Accelerated Aging of Sterile Barrier Systems for Medical Devices |
ASTM D 1708 : 2006 | Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens |
ASTM D 4404 : 1984 : R2004 | Standard Test Method for Determination of Pore Volume and Pore Volume Distribution of Soil and Rock by Mercury Intrusion Porosimetry |
ASTM E 1142 : 2006 : REV A | Standard Terminology Relating to Thermophysical Properties |
ASTM F 2809 : 2010 | Standard Terminology Relating to Medical and Surgical Materials and Devices (Withdrawn 2019) |
ASTM F 1635 : 2016 | Standard Test Method for <emph type="bdit">in vitro</emph> Degradation Testing of Hydrolytically Degradable Polymer Resins and Fabricated Forms for Surgical Implants |
ASTM D 6420 : 1999 : R2004 | Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry |
ASTM F 2212 : 2002 : R2007 : EDT 1 | Standard Guide for Characterization of Type I Collagen as Starting Material for Surgical Implants and Substrates for Tissue Engineered Medical Products (TEMPs) |
ASTM D 1388 : 2007 : REV A | Standard Test Method for Stiffness of Fabrics |
ASTM D 5226 : 2016 | Standard Practice for Dissolving Polymer Materials |
ASTM D 1621 : 2016 | Standard Test Method for Compressive Properties of Rigid Cellular Plastics |
ASTM D 1042 : 1993 | Standard Test Method for Linear Dimensional Changes of Plastics Under Accelerated Service Conditions |
ASTM E 1356 : 2008 | Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry |
ASTM E 1829 : 2002 | Standard Guide for Handling Specimens Prior to Surface Analysis |
ASTM D 2990 : 2017 | Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics |
ASTM D 3418 : 2012 | Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry |
ASTM D 1388 : 1996 : R2002 | Standard Test Method for Stiffness of Fabrics |
ASTM D 1621 : 2004 | Standard Test Method for Compressive Properties Of Rigid Cellular Plastics |
ASTM F 2902 : 2016 | Standard Guide for Assessment of Absorbable Polymeric Implants |
ASTM F 1980 : 2016 | Standard Guide for Accelerated Aging of Sterile Barrier Systems for Medical Devices |
ASTM D 3418 : 2003 | Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry |
ASTM F 2212 : 2002 | Standard Guide for Characterization of Type I Collagen as a Starting Material for Surgical Implants and Substrates for Tissue Engineered Medical Products (TEMPs) |
ASTM F 2791 : 2014 | Standard Guide for Assessment of Surface Texture of Non-Porous Biomaterials in Two Dimensions |
ASTM D 1623 : 2003 | Standard Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics |
ASTM F 2791 : 2015 | Standard Guide for Assessment of Surface Texture of Non-Porous Biomaterials in Two Dimensions |
ASTM F 2312 : 2011 | Standard Terminology Relating to Tissue Engineered Medical Products |
ASTM D 1388 : 2014 : EDT 1 | Standard Test Method for Stiffness of Fabrics |
ASTM F 1884 : 2004 : R2011 | Standard Test Method for Determining Residual Solvents in Packaging Materials |
ASTM D 3418 : 2015 | Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry |
ASTM D 6539 : 2000 : R2006 : EDT 2 | Standard Test Method for Measurement of Pneumatic Permeability of Partially Saturated Porous Materials by Flowing Air |
ASTM E 1829 : 2009 | Standard Guide for Handling Specimens Prior to Surface Analysis |
ASTM D 2990 : 2001 | Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics |
ASTM E 1298 : 1989 : R2000 | Standard Guide for Determination of Purity, Impurities, and Contaminants in Biological Drug Products |
ASTM D 4404 : 2018 | Standard Test Method for Determination of Pore Volume and Pore Volume Distribution of Soil and Rock by Mercury Intrusion Porosimetry |
ASTM E 1642 : 2000 : R2005 | Standard Practice for General Techniques of Gas Chromatography Infrared (GC/IR) Analysis |
ASTM D 4603 : 2018 | Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer |
ASTM D 5296 : 2011 | Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography |
ASTM E 1298 : 1989 : R1994 | Standard Guide for Determination of Purity, Impurities, and Contaminants in Biological Drug Products |
ASTM D 1042 : 2001 : REV A | Standard Test Method for Linear Dimensional Changes of Plastics Under Accelerated Service Conditions |
ASTM D 1621 : 2004 : REV A | Standard Test Method for Compressive Properties Of Rigid Cellular Plastics |
ASTM D 2857 : 1995 : R2007 | Standard Practice for Dilute Solution Viscosity of Polymers (Withdrawn 2016) |
ASTM D 6474 : 1999 | Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography |
ASTM D 2857 : 1970 : R1977 | Standard Test Method for Dilute Solution Viscosity Of Polymers |
ASTM D 4603 : 1996 | Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer |
ASTM F 2025 : 2006 : R2018 | Standard Practice for Gravimetric Measurement of Polymeric Components for Wear Assessment |
ASTM F 2603 : 2006 | Standard Guide for Interpreting Images of Polymeric Tissue Scaffolds |
ASTM D 5226 : 1998 : R2003 | Standard Practice for Dissolving Polymer Materials |
ASTM F 1249 : 2006 : R2011 | Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor |
ASTM D 1623 : 2009 | Standard Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics |
ASTM F 2450 : 2004 | Standard Guide for Assessing Microstructure of Polymeric Scaffolds for Use in Tissue Engineered Medical Products |
ASTM D 4404 : 1984 : R1998 : EDT 1 | Standard Test Method for Determination of Pore Volume and Pore Volume Distribution of Soil and Rock by Mercury Intrusion Porosimetry |
ASTM D 3016 : 1997 : R2018 | Standard Practice for Use of Liquid Exclusion Chromatography Terms and Relationships |
ASTM D 1042 : 2012 : R2017 | Standard Test Method for Linear Dimensional Changes of Plastics Caused by Exposure to Heat and Moisture |
ASTM D 6579 : 2006 | Standard Practice for Molecular Weight Averages and Molecular Weight Distribution of Hydrocarbon and Terpene Resins by Size-Exclusion Chromatography |
ASTM F 2212 : 2008 | Standard Guide for Characterization of Type I Collagen as Starting Material for Surgical Implants and Substrates for Tissue Engineered Medical Products (TEMPs) |
ASTM E 1642 : 2000 : R2010 | Standard Practice for General Techniques of Gas Chromatography Infrared (GC/IR) Analysis |
ASTM E 1142 : 2007 | Standard Terminology Relating to Thermophysical Properties |
ASTM E 1994 : 1998 | Standard Practice for Use of Process Oriented AOQL and LTPD Sampling Plans |
ASTM D 6420 : 1999 | Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry |
ASTM D 1238 : 2004 | Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer |
ASTM D 2990 : 2009 | Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics |
ASTM E 1356 : 2003 | Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry |
ASTM E 1298 : 2006 | Standard Guide for Determination of Purity, Impurities, and Contaminants in Biological Drug Products (Withdrawn 2014) |
ASTM D 2990 : 1995 | Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics |
ASTM F 2025 : 2006 | Standard Practice for Gravimetric Measurement of Polymeric Components for Wear Assessment |
ASTM F 2027 : 2000 : EDT 1 | Standard Guide for Characterization and Testing of Substrate Materials for Tissue-Engineered Medical Products |
ASTM E 1078 : 2014 | Standard Guide for Specimen Preparation and Mounting in Surface Analysis |
ASTM D 1388 : 1996 : EDT 1 | Standard Test Method for Stiffness of Fabrics |
ASTM F 1635 : 1995 | Standard Test Method for In Vitro Degradation Testing of Poly (L-lactic Acid) Resin and Fabricated Form for Surgical Implants |
ASTM D 1623 : 1978 : R1995 | Standard Test Method for Tensile And Tensile Adhesion Properties Of Rigid Cellular Plastics |
ASTM D 1621 : 2000 | Standard Test Method for Compressive Properties Of Rigid Cellular Plastics |
ASTM F 1634 : 1995 : R2016 | Standard Practice for <emph type="bdit">In-Vitro</emph> Environmental Conditioning of Polymer Matrix Composite Materials and Implant Devices (Withdrawn 2017) |
ASTM D 1621 : 1994 | Standard Test Method for Compressive Properties of Rigid Cellular Plastics |
ASTM F 2027 : 2008 | Standard Guide for Characterization and Testing of Raw or Starting Biomaterials for Tissue-Engineered Medical Products |
ASTM F 1635 : 2004 | Standard Test Method for <i>in Vitro</i> Degradation Testing of Hydrolytically Degradable Polymer Resins and Fabricated Forms for Surgical Implants |
ASTM E 1356 : 2008 : R2014 | Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry (Withdrawn 2023) |
ASTM E 1994 : 2009 : R2013 | Standard Practice for Use of Process Oriented AOQL and LTPD Sampling Plans |
ASTM D 1388 : 2018 | Standard Test Method for Stiffness of Fabrics |
ASTM D 1042 : 2001 | Standard Test Method for Linear Dimensional Changes of Plastics Under Accelerated Service Conditions |
ASTM D 6539 : 2000 | Standard Test Method for Measurement of Pneumatic Permeability of Partially Saturated Porous Materials by Flowing Air |
ASTM E 1142 : 2014 : REV A | Standard Terminology Relating to Thermophysical Properties |
ASTM F 2902 : 2016 : EDT 1 | Standard Guide for Assessment of Absorbable Polymeric Implants |
ASTM D 3418 : 2008 | Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry |
ASTM F 2212 : 2002 : R2007 | Standard Guide for Characterization of Type I Collagen as Starting Material for Surgical Implants and Substrates for Tissue Engineered Medical Products (TEMPs) |
ASTM F 2212 : 2009 | Standard Guide for Characterization of Type I Collagen as Starting Material for Surgical Implants and Substrates for Tissue Engineered Medical Products (TEMPs) |
ASTM D 6579 : 2011 | Standard Practice for Molecular Weight Averages and Molecular Weight Distribution of Hydrocarbon, Rosin and Terpene Resins by Size-Exclusion Chromatography |
ASTM F 1884 : 2004 | Standard Test Method for Determining Residual Solvents in Packaging Materials |
ASTM E 1142 : 2014 : REV B | Standard Terminology Relating to Thermophysical Properties |
ASTM D 1708 : 2013 | Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens |
ASTM F 2450 : 2018 | Standard Guide for Assessing Microstructure of Polymeric Scaffolds for Use in Tissue-Engineered Medical Products |
ASTM E 1142 : 2005 | Standard Terminology Relating to Thermophysical Properties |
ASTM D 1708 : 2010 | Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens |
ASTM F 2791 : 2009 | Standard Guide for Assessment of Surface Texture of Non-Porous Biomaterials in Two Dimensions |
ASTM E 1142 : 2015 | Standard Terminology Relating to Thermophysical Properties |
ASTM D 6539 : 2000 : R2006 | Standard Test Method for Measurement of Pneumatic Permeability of Partially Saturated Porous Materials by Flowing Air |
ASTM D 6420 : 2018 | Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry |
ASTM D 5226 : 1998 : R2010 : EDT 1 | Standard Practice for Dissolving Polymer Materials |
ASTM D 1388 : 2008 : R2012 | Standard Test Method for Stiffness of Fabrics |
ASTM F 1980 : 1999 : EDT 1 | Standard Guide for Accelerated Aging of Sterile Medical Device Packages |
ASTM E 1294 : 1989 : R1999 | Standard Test Method for Pore Size Characteristics of Membrane Filters Using Automated Liquid Porosimeter (Withdrawn 2008) |
ASTM F 1983 : 2014 | Standard Practice for Assessment of Selected Tissue Effects of Absorbable Biomaterials for Implant Applications |
ASTM D 1388 : 2014 | Standard Test Method for Stiffness of Fabrics |
ASTM D 1623 : 2017 | Standard Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics |
ASTM F 1634 : 1995 : R2008 | Standard Practice for <span class="bdit">In-Vitro</span> Environmental Conditioning of Polymer Matrix Composite Materials and Implant Devices |
ASTM F 1249 : 1990 : R1995 | Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor |
ASTM D 6474 : 2012 | Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography |
ASTM F 2603 : 2006 : R2012 | Standard Guide for Interpreting Images of Polymeric Tissue Scaffolds |
ASTM F 2312 : 2010 | Standard Terminology Relating to Tissue Engineered Medical Products |
ASTM D 1238 : 2001 : EDT 1 | Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer |
ASTM D 1708 : 2002 : REV A | Standard Test Method for Tensile Properties of Plastics By Use of Microtensile Specimens |
ASTM E 1356 : 1998 | Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry or Differential Thermal Analysis |
ASTM D 5226 : 1998 | Standard Practice for Dissolving Polymer Materials |
ASTM E 1142 : 2011 : REV B | Standard Terminology Relating to Thermophysical Properties |
ASTM F 2902 : 2012 | Standard Guide for Assessment of Absorbable Polymeric Implants |
ASTM E 1642 : 2000 | Standard Practice for General Techniques of Gas Chromatography Infrared (GC/IR) Analysis |
ASTM D 1238 : 2004 : REV A | Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer |
ASTM F 1634 : 1995 : R2000 | Standard Practice for In-Vitro Environmental Conditioning of Polymer Matrix Composite Materials and Implant Devices |
ASTM E 1829 : 1997 | Standard Guide for Handling Specimens Prior to Surface Analysis |
ASTM F 1884 : 2004 : R2018 | Standard Test Methods for Determining Residual Solvents in Packaging Materials |
ASTM D 1708 : 2018 | Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens |
ASTM D 1388 : 2008 | Standard Test Method for Stiffness of Fabrics |
ASTM F 1635 : 2011 | Standard Test Method for <i>in vitro</i> Degradation Testing of Hydrolytically Degradable Polymer Resins and Fabricated Forms for Surgical Implants |
ASTM D 6539 : 2013 | Standard Test Method for Measurement of the Permeability of Unsaturated Porous Materials by Flowing Air (Withdrawn 2022) |
ASTM D 1388 : 2007 | Standard Test Method for Stiffness of Fabrics |
ASTM E 1078 : 2009 | Standard Guide for Specimen Preparation and Mounting in Surface Analysis |
ASTM D 1238 : 1985 | Standard Test Method for Flow Rates of Thermoplastics by Extrusion Plastometer |
ASTM F 2212 : 2008 : EDT 1 | Standard Guide for Characterization of Type I Collagen as Starting Material for Surgical Implants and Substrates for Tissue Engineered Medical Products (TEMPs) |
ASTM F 2312 : 2003 | Standard Terminology Relating to Tissue Engineered Medical Products |
ASTM F 2450 : 2010 | Standard Guide for Assessing Microstructure of Polymeric Scaffolds for Use in Tissue Engineered Medical Products |
ASTM F 1983 : 1999 | Standard Practice for Assessment of Compatibiltiy of Absorbable/Resorbable Biomaterials for Implant Applications |
ASTM F 1980 : 2002 | Standard Guide for Accelerated Aging of Sterile Medical Device Packages |
ASTM F 2883 : 2011 | Standard Guide for Characterization of Ceramic and Mineral Based Scaffolds used for Tissue-Engineered Medical Products (TEMPs) and as Device for Surgical Implant Applications (Withdrawn 2020) |
ASTM F 1249 : 2001 | Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor |
ASTM D 1042 : 2012 | Standard Test Method for Linear Dimensional Changes of Plastics Caused by Exposure to Heat and Moisture |
ASTM F 1635 : 2004 : REV A | Standard Test Method for <i>in Vitro</i> Degradation Testing of Hydrolytically Degradable Polymer Resins and Fabricated Forms for Surgical Implants |
ASTM D 6579 : 2000 | Standard Practice for Molecular Weight Averages and Molecular Weight Distribution of Hydrocarbon and Terpene Resins by Size-Exclusion Chromatography |
ASTM F 1249 : 2013 | Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor |
ASTM D 4404 : 2010 | Standard Test Method for Determination of Pore Volume and Pore Volume Distribution of Soil and Rock by Mercury Intrusion Porosimetry |
ASTM D 4603 : 2003 : R2011 : EDT 1 | Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.