ASTM F 2291 : 2018
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Design of Amusement Rides and Devices
Hardcopy , PDF
20-06-2019
English
01-08-2018
Important note : Users cannot be edited or removed once added to your Multi user PDF.This practice establishes criteria for the design of amusement rides, devices and major modifications to amusement rides and devices manufactured after the effective date of publication
| Committee |
F 24
|
| DocumentType |
Standard Practice
|
| Pages |
65
|
| ProductNote |
THIS STANDARD ALSO REFERS TO STP-1330, NDS 2005, ANSI/AISC 360-05, ANSI B93.114M, ANSI B77.1, ANSI Y32.10, ASCE 7, ASCE 16, ASCE/SEI 7-05, ASME B15.1, ASME A17.1, ANSI/AWS D1.1/D1.1M, MIL 17, NFPA/JIC T2.25.1M, NFPA/T2.24.1, SAE 100R4, SAE J518, SAE J833, SAE J1926, SAE HS 4000, SIA 260, SIA 261, UL 508A, USDA-72, ASM Atlas of Fatigue Curves.
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This practice establishes criteria for the design of amusement rides, devices and major modifications to amusement rides and devices manufactured after the effective date of publication except as noted in 1.2.
1.2This practice shall not apply to:
1.2.1Patron directed amusement rides or devices (for example, go karts, bumper cars, bumper boats),
1.2.2Artificial climbing walls,
1.2.3Air-supported structures,
1.2.4dry slides,
1.2.5coin operated rides,
1.2.6Amusement rides or devices that involve the purposeful immersion of the patron's body partially or totally in the water and involves more than incidental patron water contact (for example, pools, water slides, lazy rivers, interactive aquatic play devices),
1.2.7Amusement rides and devices whose design criteria are specifically addressed in another ASTM standard,
1.2.8Portions of an amusement ride or device unaffected by a major modification,
1.2.9Upgrades to electrical wiring, electrical motors and electrical components of amusement rides and devices provided the original design and safety criteria are maintained or enhanced, and
1.2.10Pre-existing designs manufactured after the effective date of publication of this practice if the design is service proven or previously compliant and the manufacturer provides:
1.2.10.1A historical summary of the amusement ride, device or major modification, and
1.2.10.2A statement that the design is service proven or previously compliant as specified by Section 3.
1.2.10.3Amusement rides and devices, and major modifications to amusement rides and devices may qualify as “previously compliant” for five years following the date of publication of this practice. Thereafter, amusement rides and devices, and major modifications to amusement rides and devices must qualify as “service proven” or meet the requirements of this practice.
1.3This practice includes an annex (mandatory), which provides additional information (for example, rationale, background, interpretations, drawings, commentary, and so forth) to improve the user's understanding and application of the criteria presented in this practice. The annex information shall be interpreted as mandatory design criteria.
1.4This practice includes an appendix (non-mandatory), which provides additional information (for example, rationale, background, interpretations, drawings, commentary, and so forth.) to improve the user's understanding and application of the criteria presented in this practice. The appendix information shall not be interpreted as mandatory design criteria.
1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM F 1159 : 2016 | Standard Practice for Design of Amusement Rides and Devices that are Outside the Purview of Other F24 Design Standards |
| ASTM F 2970 : 2017 | Standard Practice for Design, Manufacture, Installation, Operation, Maintenance, Inspection and Major Modification of Trampoline Courts |
| ASTM F 3054 : 2018 | Standard Practice for Operations of Amusement Railway Rides, Devices, and Facilities |
| ASTM F 3158 : 2016 | Standard Practice for Patron Transportation Conveyors Used with a Water Related Amusement Ride or Device |
| ASTM F 3214 : 2018 | Standard Practice for Characterization of Fire Properties of Materials Specified for Vehicles Associated with Amusement Rides and Devices |
| ASTM F 2374 : 2019 | Standard Practice for Design, Manufacture, Operation, and Maintenance of Inflatable Amusement Devices |
| ASTM F 2783 : 2017 | Standard Practice for Design, Manufacture, Operation, Maintenance, and Inspection of Amusement Rides and Devices, in Canada |
| ASTM F 2007 : 2018 | Standard Practice for Design, Manufacture, and Operation of Concession Go-Karts and Facilities |
| ASTM F 2375 : 2009 : R2017 | Standard Practice for Design, Manufacture, Installation and Testing of Climbing Nets and Netting/Mesh used in Amusement Rides, Devices, Play Areas and Attractions |
| ASTM F 2960 : 2016 | Standard Practice for Permanent Amusement Railway Ride Tracks and Related Devices |
| ASTM F 2959 : 2018 | Standard Practice for Aerial Adventure Courses |
| ASTM F 3133 : 2018 | Standard Practice for Classification, Design, Manufacture, Construction, Maintenance, and Operation of Stationary Wave Systems |
| ASTM F 1193 : 2018 : REV A | Standard Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.