ASTM F 2460 : 2011
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Special Requirements for Bumper Boats
Hardcopy , PDF
05-11-2019
English
01-03-2011
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
F 24
|
| DocumentType |
Standard Practice
|
| Pages |
2
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1 This practice establishes criteria for the design, manufacture, and operations of bumper boats. These are boats used to bump into each other intentionally as directed by drivers as a form of entertainment. Boats are fitted with an inflatable or impact attenuating device to allow for such bumping.
1.2 This practice follows Practices F1193 and F770 as the basic level of safety for bumper boats. These practices shall be followed for all bumper boats under this practice. This practice shall include all modifications, improvements, and deviations to design, quality, manufacture, construction, ownership, operation, inspection, and maintenance of a bumper boat
1.3 This practice does not apply to personal watercraft, human powered watercraft, or watercraft used for general purposes by private owners.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM F 2783 : 2017 | Standard Practice for Design, Manufacture, Operation, Maintenance, and Inspection of Amusement Rides and Devices, in Canada |
| ASTM F 1193 : 2003 | Standard Practice for An Amusement Ride and Device Manufacturer Quality Assurance Program |
| ASTM F 1193 : 2016 | Standard Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices |
| ASTM F 1159 : 1997 : REV A | Standard Practice for the Design and Manufacture of Amusement Rides and Devices |
| ASTM F 1159 : 2015 | Standard Practice for Design of Amusement Rides and Devices that are Outside the Purview of Other F24 Design Standards |
| ASTM F 1159 : 2003 : REV A | Standard Practice for Design and Manufacture of Patron Directed, Artificial Climbing Walls, Dry Slide, Coin Operated and Purposeful Water Immersion Amusement Rides and Devices and Air-Supported Structures |
| ASTM F 1193 : 2014 | Standard Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices |
| ASTM F 1193 : 2006 | Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices |
| ASTM F 1193 : 2018 : REV A | Standard Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices |
| ASTM F 1193 : 2004 : REV B | Standard Practice for Amusement Ride and Device Manufacturer Quality Assurance Program and Manufacturing Requirements |
| ASTM F 1159 : 2002 | Standard Practice for the Design and Manufacture of Amusement Rides and Devices |
| ASTM F 1193 : 2003 : REV A | Standard Practice for Amusement Ride and Device Manufacturer Quality Assurance Program and Manufacturing Requirements |
| ASTM F 1193 : 2005 | Standard Practice for Amusement Ride and Device Manufacturer Quality Assurance Program and Manufacturing Requirements |
| ASTM F 1159 : 2011 | Standard Practice for Design and Manufacture of Patron Directed, Artificial Climbing Walls, Dry Slide, Coin Operated and Purposeful Water Immersion Amusement Rides and Devices and Air-Supported Structures |
| ASTM F 1193 : 2004 | Standard Practice for Amusement Ride and Device Manufacturer Quality Assurance Program and Manufacturing Requirements |
| ASTM F 1159 : 2016 | Standard Practice for Design of Amusement Rides and Devices that are Outside the Purview of Other F24 Design Standards |
| ASTM F 1193 : 2015 | Standard Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices |
| ASTM F 1193 : 1997 | Standard Practice for An Amusement Ride and Device Manufacturer Quality Assurance Program |
| ASTM F 1193 : 2004 : REV A | Standard Practice for Amusement Ride and Device Manufacturer Quality Assurance Program and Manufacturing Requirements |
| ASTM F 1159 : 2003 | Standard Practice for the Design and Manufacture of Amusement Rides and Devices |
| ASTM F 1159 : 2014 | Standard Practice for Design of Amusement Rides and Devices that are Outside the Purview of Other F24 Design Standards |
| ASTM F 1193 : 2018 | Standard Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices |
| ASTM F 1159 : 2015 : REV A | Standard Practice for Design of Amusement Rides and Devices that are Outside the Purview of Other F24 Design Standards |
| ASTM F 1159 : 2015 : REV B | Standard Practice for Design of Amusement Rides and Devices that are Outside the Purview of Other F24 Design Standards |
| ASTM F 1193 : 2017 | Standard Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.