ASTM F 2461 : 2020 : REV A
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Manufacture, Construction, Operation, and Maintenance of Aquatic Play Equipment
Hardcopy , PDF
04-08-2023
English
18-11-2020
Committee |
F 24
|
DocumentType |
Standard Practice
|
Pages |
13
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This practice covers information for manufacture, construction, operations and maintenance of aquatic play equipment and provides safety performance standards for various types of public aquatic play components and aquatic play composite structures.
1.2Inclusions:
1.2.1Climbable and climb-resistant aquatic play components, composite aquatic play structures, user controls, water sprays, fountains, and slides that occur on wet decks and wading, swimming or leisure pools. The play components specified herein occur for use in aquatic play areas.
1.2.2Play equipment, fall zones, use zones for wet decks, wading pools, swimming pools and leisure pools.
1.2.3This standard is intended to apply to Aquatic Play Equipment that is located in and around re- circulated and potable water recreational facilities. Such facilities include but are not limited to amusement parks, theme parks, water parks, family entertainment centers, municipal swimming pools and municipal parks.
1.2.4Waterslides 6 ft in height or smaller.
1.3Exclusions:
1.3.1Playground equipment that does not have an entry or an exit onto or into a wet deck, wading pool, swimming pool or aquatic recreation pool.
1.3.2Home playground or home pool equipment or play equipment as scoped in Consumer Safety Performance Specification F1148-17 and ANSI/NSPI-5.
1.3.3Waterslides as scoped in Practice F2376-17a.
1.3.4Flotation devices used on water slides or in swimming pools.
1.3.5Swimming pools as specified by ANSI/NSPI-1 or ANSI/IAF-9.
1.3.6Products or facility elements specifically designed to provide access to and from pools for people with disabilities.
1.3.7Water rides such as log flumes, raft rides, inner tube rides, waterslides or other attractions where the participant sits in a vehicle or is physically propelled or moved by or with water.
1.3.8Sports equipment, fitness equipment, and diving equipment.
1.4Compliance:
1.4.1Where water is indirectly or directly added or applied to Consumer Safety Performance Specification F1487-17 play equipment, the equipment shall comply with this standard. Where a requirement for compliance to a section of the Consumer Safety Performance Specification F1487-17 standard is required by this standard, the section number is preceded with the standard's designation.
1.4.2Soft contained play structures with aquatic play components shall comply with Safety Performance Specification F1918-12 except as modified by this standard.
1.4.3Aquatic play components and composite play structures represented, as complying with this safety performance standard shall meet all applicable requirements specified herein. Anyone representing compliance with this standard shall keep such essential records as are necessary to document any claim that the requirements within this standard have been met.
1.5This standard includes the following sections:
Scope | Section 1 |
Referenced Documents | Section 2 |
Terminology | Section 3 |
Manufacturing and Materials | Section 4 |
Design | Section 5 |
Performance Requirements | Section 6 |
Operator Responsibilities | Section 7 |
Manufacturer/Designer | Section 8 |
Installer Responsibilities | Section 9 |
1.6The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. (The conversion factor from inch-pound to metric units is 1 in. = 25.4 mm, and 1 lb = 4.4482 N.)
1.7This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.8This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM F 2783 : 2020 | Standard Practice for Design, Manufacture, Operation, Maintenance, and Inspection of Amusement Rides and Devices, in Canada |
ASTM F 1292 : 2018 : EDT 1 | Standard Specification for Impact Attenuation of Surfacing Materials Within the Use Zone of Playground Equipment |
ASTM F 770 : 2019 | Standard Practice for Ownership, Operation, Maintenance, and Inspection of Amusement Rides and Devices |
ASTM F 770 : 2021 : REV A | Standard Practice for Ownership, Operation, Maintenance, and Inspection of Amusement Rides and Devices |
ASTM F 1487 : 2017 | Standard Consumer Safety Performance Specification for Playground Equipment for Public Use |
ASTM F 770 : 2021 | Standard Practice for Ownership, Operation, Maintenance, and Inspection of Amusement Rides and Devices |
ASTM F 1918 : 2012 : R2017 | Standard Safety Performance Specification for Soft Contained Play Equipment |
ASTM F 1292 : 2022 | Standard Specification for Impact Attenuation of Surfacing Materials Within the Use Zone of Playground Equipment |
ASTM F 2291 : 2022 | Standard Practice for Design of Amusement Rides and Devices |
ASTM F 2376 : 2021 : REV A | Standard Practice for Classification, Design, Manufacture, Construction, and Operation of Water Slide Systems |
ASTM F 1148 : 2000 | Standard Consumer Safety Performance Specification for Home Playground Equipment |
ASTM F 1193 : 2018 : REV A | Standard Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices |
ASTM F 1148 : 2021 | Standard Consumer Safety Performance Specification for Home Playground Equipment |
ASTM F 2376 : 2022 | Standard Practice for Classification, Design, Manufacture, Construction, and Operation of Water Slide Systems |
ASTM F 1193 : 2022 | Standard Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices |
ASTM F 2376 : 2021 | Standard Practice for Classification, Design, Manufacture, Construction, and Operation of Water Slide Systems |
ASTM F 1148 : 2022 | Standard Consumer Safety Performance Specification for Home Playground Equipment |
ASTM F 2291 : 2022 : REV A | Standard Practice for Design of Amusement Rides and Devices |
ASTM F 1918 : 2021 | Standard Safety Performance Specification for Soft Contained Play Equipment |
ASTM F 1487 : 1998 | Standard Consumer Safety Performance Specification for Playground Equipment for Public Use |
ASTM F 1193 : 2023 | Standard Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices |
ASTM F 770 : 2022 | Standard Practice for Ownership, Operation, Maintenance, and Inspection of Amusement Rides and Devices |
ASTM F 770 : 2023 | Standard Practice for Ownership, Operation, Maintenance, and Inspection of Amusement Rides and Devices |
ASTM F 2291 : 2019 | Standard Practice for Design of Amusement Rides and Devices |
ASTM F 2376 : 2017 : REV A | Standard Practice for Classification, Design, Manufacture, Construction, and Operation of Water Slide Systems |
ASTM F 1487 : 2021 | Standard Consumer Safety Performance Specification for Playground Equipment for Public Use |
ASTM F 2291 : 2023 | Standard Practice for Design of Amusement Rides and Devices |
ASTM F 1148 : 2020 | Standard Consumer Safety Performance Specification for Home Playground Equipment |
ASTM F 2291 : 2020 | Standard Practice for Design of Amusement Rides and Devices |
ASTM F 2291 : 2021 | Standard Practice for Design of Amusement Rides and Devices |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.