ASTM F 2548 : 2012 : R2018
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Expanded Metal Fence Systems for Security Purposes
Hardcopy , PDF
06-06-2020
English
01-03-2018
CONTAINED IN VOL. 01.06, 2018 Specifies selection and installation of expanded metal fence systems for applications on new or retrofit fences for commercial, industrial, governmental or institutional facilities as applicable to homeland security, or where the possibility of malevolent incursion is significant.
Committee |
F 14
|
DocumentType |
Standard
|
Pages |
5
|
ProductNote |
Reconfirmed 2018
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This specification covers selection and installation of expanded metal fence systems for applications on new or retrofit fences for commercial, industrial, governmental or institutional facilities as applicable to homeland security, or where the possibility of malevolent incursion is significant. See Fig. 1 for typical examples of expanded metal fence applications. This type of fence system is not recommended for residential or public recreational facilities such as pools, schools, and kindergartens.
FIG. 1Expanded Metal Fencing Applications
1.2This specification is intended to guide those responsible for or concerned with the design and installation of an expanded metal fence system capable of denying or delaying unwanted access into or out of an area.
1.3No recommendation is made or implied here as to the merits of the product from any particular manufacturer. Choice of component selection for the expanded metal system should be made by the writer of the project specification based on their own perception of the product’s merit and the consequence of a malevolent incursion.
1.4The values stated in inch-pound units are to be regarded as standard. Any values given in parentheses are for information only.
1.5This specification does not purport to address all of the safety and security concerns, if any, associated with homeland security. It is the responsibility of the user of this standard to establish the required and appropriate level of security.
1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM F 2780 : 2009 : R2014 | Standard Guide for Design and Construction of Expanded Metal Security Fences and Barriers |
ASTM F 2814 : 2009 : R2015 | Standard Guide for Design and Construction of Ornamental Steel Picket Fence Systems for Security Purposes |
ASTM F 2780 : 2020 | Standard Guide for Design and Construction of Expanded Metal Security Fences and Barriers |
ASTM F 1267 : 2015-12 | SPECIFICATION FOR METAL, EXPANDED, STEEL |
ASTM F 1083 : 2008 | Standard Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures |
ASTM F 1083 : 2016 | Standard Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures |
ASTM F 1267 : 2001 | Standard Specification for Metal, Expanded, Steel |
ASTM F 1267 : 2012 | Standard Specification for Metal, Expanded, Steel |
ASTM F 1043 : 2014 | Standard Specification for Strength and Protective Coatings on Steel Industrial Fence Framework |
ASTM F 1043 : 2004 | Standard Specification for Strength and Protective Coatings on Metal Industrial Chain Link Fence Framework |
ASTM A 123/A123M : 2017 : REDLINE | Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products |
ASTM F 1267 : 1991 : R1997 | Standard Specification for Metal, Expanded, Steel |
ASTM F 1043 : 2010 | Standard Specification for Strength and Protective Coatings on Steel Industrial Chain Link Fence Framework |
ASTM F 1267 : 2006 | Standard Specification for Metal, Expanded, Steel |
ASTM F 1043 : 2017 : REV A | Standard Specification for Strength and Protective Coatings on Steel Industrial Fence Framework |
ASTM F 1083 : 2004 | Standard Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures |
ASTM F 1043 : 2000 | Standard Specification for Strength and Protective Coatings on Metal Industrial Chain Link Fence Framework |
ASTM F 1267 : 2007 | Standard Specification for Metal, Expanded, Steel |
ASTM F 1083 : 2018 | Standard Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures |
ASCE 7 05 : 2006 | MINIMUM DESIGN LOADS FOR BUILDINGS AND OTHER STRUCTURES |
ASTM F 1043 : 2016 | Standard Specification for Strength and Protective Coatings on Steel Industrial Fence Framework |
ASTM F 1043 : 2008 | Standard Specification for Strength and Protective Coatings on Steel Industrial Chain Link Fence Framework |
ASTM F 1043 : 2011 | Standard Specification for Strength and Protective Coatings on Steel Industrial Chain Link Fence Framework |
ASTM F 1043 : 2003 | Standard Specification for Strength and Protective Coatings on Metal Industrial Chain Link Fence Framework |
ASTM F 1043 : 2011 : REV A | Standard Specification for Strength and Protective Coatings on Steel Industrial Chain Link Fence Framework |
ASTM F 1083 : 1997 | Standard Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures |
ASTM F 1083 : 2006 | Standard Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures |
ASTM F 1083 : 2010 | Standard Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures |
ASTM F 1043 : 2018 | Standard Specification for Strength and Protective Coatings on Steel Industrial Fence Framework |
ASTM F 1043 : 2016 : REV A | Standard Specification for Strength and Protective Coatings on Steel Industrial Fence Framework |
ASTM F 1043 : 2013 | Standard Specification for Strength and Protective Coatings on Steel Industrial Fence Framework |
ASTM F 1083 : 2013 | Standard Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures |
ASTM F 1043 : 2017 | Standard Specification for Strength and Protective Coatings on Steel Industrial Fence Framework |
ASTM F 1083 : 2016-02 | SPECIFICATION FOR PIPE, STEEL, HOT-DIPPED ZINC-COATED (GALVANIZED) WELDED, FOR FENCE STRUCTURES |
ASTM F 1267 : 2015 | Standard Specification for Metal, Expanded, Steel |
ASTM F 1043 : 2012 | Standard Specification for Strength and Protective Coatings on Steel Industrial Fence Framework |
ASTM F 934 : 1996 | Standard Specification for Standard Colors for Polymer-Coated Chain Link Fence Materials |
ASTM F 1043 : 2006 | Standard Specification for Strength and Protective Coatings on Steel Industrial Chain Link Fence Framework |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.