![header thumbnail](/images/publishers\astm_cover.gif)
ASTM F 3187 : 2016
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
![header thumbnail](/images/publishers\astm_cover.gif)
Standard Guide for Directed Energy Deposition of Metals
Hardcopy , PDF
05-02-2024
English
04-11-2016
CONTAINED IN VOL. 10.04, 2016 Pertains to serve as a guide for defining the technology application space and limits, DED system set-up considerations, machine operation, process documentation, work practices, and available system and process monitoring technologies.
Committee |
F 42
|
DocumentType |
Guide
|
Pages |
22
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy |
1.1Directed Energy Deposition (DED) is used for repair, rapid prototyping and low volume part fabrication. This document is intended to serve as a guide for defining the technology application space and limits, DED system set-up considerations, machine operation, process documentation, work practices, and available system and process monitoring technologies.
1.2DED is an additive manufacturing process in which focused thermal energy is used to fuse materials by melting as they are being deposited.
1.3DED Systems comprise multiple categories of machines using laser beam (LB), electron beam (EB), or arc plasma energy sources. Feedstock typically comprises either powder or wire. Deposition typically occurs either under inert gas (arc systems or laser) or in vacuum (EB systems). Although these are the predominant methods employed in practice, the use of other energy sources, feedstocks and atmospheres may also fall into this category.
1.4The values stated in SI units are to be regarded as standard. All units of measure included in this guide are accepted for use with the SI.
1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
ASTM E 1316 : 2022 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM D 6128 : 1997 | Standard Test Method for Shear Testing of Bulk Solids Using the Jenike Shear Cell |
ASTM D 6128 : 2022 | Standard Test Method for Shear Testing of Bulk Solids Using the Jenike Shear Tester |
ASTM C 1145 : 2019 | Standard Terminology of Advanced Ceramics |
ASTM E 11 : 2020 | Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves |
AWS A5.14/A5.14M : 2011 | SPECIFICATION FOR NICKEL AND NICKEL-ALLOY BARE WELDING ELECTRODES AND RODS |
ASTM F 2971 : 2013 | Standard Practice for Reporting Data for Test Specimens Prepared by Additive Manufacturing |
ASTM E 1316 : 2011 : REV B | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2015 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2009 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2008 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM C 1145 : 1998 | Standard Terminology of Advanced Ceramics |
ASTM E 1316 : 2010 : REV C | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2020 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2017 | Standard Terminology for Nondestructive Examinations |
ASTM C 1145 : 2006 | Standard Terminology of Advanced Ceramics |
ASTM E 1316 : 2013 : REV C | Standard Terminology for Nondestructive Examinations |
ASTM D 6128 : 2006 | Standard Test Method for Shear Testing of Bulk Solids Using the Jenike Shear Cell |
ASTM E 1316 : 2000 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM D 6128 : 2014 | Standard Test Method for Shear Testing of Bulk Solids Using the Jenike Shear Cell |
ASTM E 1316 : 2019 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1515 : 2014 | Standard Test Method for Minimum Explosible Concentration of Combustible Dusts |
ASTM F 2971 : 2013 : R2021 | Standard Practice for Reporting Data for Test Specimens Prepared by Additive Manufacturing |
ASTM E 1515 : 2014 : R2022 | Standard Test Method for Minimum Explosible Concentration of Combustible Dusts |
ASTM B 214 : 2022 | Standard Test Method for Sieve Analysis of Metal Powders |
ASTM E 1316 : 2014 | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2013 : REV B | Standard Terminology for Nondestructive Examinations |
ASTM C 1145 : 2005 | Standard Terminology of Advanced Ceramics |
AWS A5.16/A5.16M : 2013 | SPECIFICATION FOR TITANIUM AND TITANIUM-ALLOY WELDING ELECTRODES AND RODS |
ASTM E 1316 : 2018 | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2011 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2007 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1515 : 2007 | Standard Test Method for Minimum Explosible Concentration of Combustible Dusts |
ASTM E 1316 : 2015 | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2019 : REV B | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2021 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2013 : REV D | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2000 | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2019 | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2001 | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2003 | Standard Terminology for Nondestructive Examinations |
ASTM C 1145 : 2003 | Standard Terminology of Advanced Ceramics |
ASTM E 1316 : 2018 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 11 : 2022 | Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves |
AWS A5.01M/A5.01 : 2013 | WELDING CONSUMABLES - PROCUREMENT OF FILLER METALS AND FLUXES |
ASTM E 1515 : 2014 : REDLINE | Standard Test Method for Minimum Explosible Concentration of Combustible Dusts |
ASTM E 1515 : 2003 | Standard Test Method for Minimum Explosible Concentration of Combustible Dusts |
ASTM D 6128 : 2016 : REDLINE | Standard Test Method for Shear Testing of Bulk Solids Using the Jenike Shear Tester |
ASTM D 6128 : 2000 | Standard Test Method for Shear Testing of Bulk Solids Using the Jenike Shear Cell |
ASTM E 1316 : 2006 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2016 | Standard Terminology for Nondestructive Examinations |
ASTM B 214 : 2016 : REDLINE | Standard Test Method for Sieve Analysis of Metal Powders |
ASTM E 1316 : 2021 : REV D | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2002 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2014 : EDT 1 | Standard Terminology for Nondestructive Examinations |
ASTM B 214 : 2016 | Standard Test Method for Sieve Analysis of Metal Powders |
ASTM E 1316 : 2010 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2022 | Standard Terminology for Nondestructive Examinations |
ASTM C 1145 : 2006 : R2013 | Standard Terminology of Advanced Ceramics |
ASTM E 1316 : 2013 | Standard Terminology for Nondestructive Examinations |
ASTM F 327 : 2008 : R2022 | Standard Practice for Sampling Gas Blow Down Systems and Components for Particulate Contamination by Automatic Particle Monitor Method |
ASTM E 1316 : 2021 : REV B | Standard Terminology for Nondestructive Examinations |
ASTM E 11 : 2017 : REDLINE | Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves |
ASTM C 1145 : 2002 | Standard Terminology of Advanced Ceramics |
ASTM F 327 : 2008 : R2015 | Standard Practice for Sampling Gas Blow Down Systems and Components for Particulate Contamination by Automatic Particle Monitor Method |
AWS A5.02/A5.02M : 2007 | SPECIFICATION FOR FILLER METAL STANDARD SIZES, PACKAGING, AND PHYSICAL ATTRIBUTES |
ASTM E 1316 : 2017 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2016 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2009 | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2002 | Standard Terminology for Nondestructive Examinations |
ASTM C 1145 : 2002 : REV A | Standard Terminology of Advanced Ceramics |
ASTM E 1316 : 2004 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2007 : REV C | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2010 : REV B | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2013 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2023 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM C 1145 : 2001 | Standard Terminology of Advanced Ceramics |
ASTM E 1316 : 2021 | Standard Terminology for Nondestructive Examinations |
ASTM C 1145 : 2006 : R2013 : EDT 1 | Standard Terminology of Advanced Ceramics |
ASTM E 1316 : 2007 : REV B | Standard Terminology for Nondestructive Examinations |
ASTM E 1515 : 2000 | Standard Test Method for Minimum Explosible Concentration of Combustible Dusts |
ASTM D 6128 : 2016 | Standard Test Method for Shear Testing of Bulk Solids Using the Jenike Shear Tester |
ASTM E 1316 : 2005 | Standard Terminology for Nondestructive Testing |
ASTM E 1316 : 2004 | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2021 : REV C | Standard Terminology for Nondestructive Examinations |
AWS A3.0M/A3.0 : 2010 | STANDARD WELDING TERMS AND DEFINITIONS INCLUDING TERMS FOR ADHESIVE BONDING, BRAZING, SOLDERING, THERMAL CUTTING, AND THERMAL SPRAYING |
ASTM E 1316 : 2007 | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2023 | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2023 : REV B | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2012 | Standard Terminology for Nondestructive Examinations |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.