• Shopping Cart
    There are no items in your cart

ASTM F 468 : 2023

Current

Current

The latest, up-to-date edition.

Standard Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

12-07-2023

€61.92
Excluding VAT

Committee
F 16
DocumentType
Standard
Pages
15
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

1.1This specification covers the requirements for commercial wrought nonferrous bolts, hex cap screws, and studs 0.250 to 1.500 in., socket head cap screws (including socket head cap, button head and flat countersunk head configurations) with nominal thread 0.06 (size 0) through 1.500 in. and low head socket cap screws with nominal thread 0.112 (size 4) through 0.625 (5/8) in. inclusive in diameter manufactured from a number of alloys in common use and intended for general service applications.

1.2Applicable nuts for use with bolts, cap screws, and studs covered by this specification are covered by Specification F467.

1.2.1The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard.

Note 1:A complete metric companion to Specification F468 has been developed—F468M; therefore no metric equivalents are presented in this specification.

1.3This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM B 746/B746M : 2022 : EDT 1 Standard Specification for Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches
ASTM C 1802 : 2023 Standard Specification for Design, Testing, Manufacture, Selection, and Installation of Horizontal Fabricated Metal Access Hatches for Utility, Water, and Wastewater Structures
ASTM F 1508 : 1996 : R2021 Standard Specification for Angle Style, Pressure Relief Valves for Steam, Gas, and Liquid Services
ASTM F 1155 : 2010 : R2019 Standard Practice for Selection and Application of Piping System Materials
ASTM B 745/B745M : 2015 : R2021 Standard Specification for Corrugated Aluminum Pipe for Sewers and Drains
ASTM F 1718 : 2001 : R2019 Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps
ASTM F 467 : 2013 : R2018 Standard Specification for Nonferrous Nuts for General Use
ASTM F 1370 : 1992 : R2019 : EDT 1 Standard Specification for Pressure-Reducing Valves for Water Systems, Shipboard
ASTM B 746/B746M : 2022 Standard Specification for Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches
ASTM F 998 : 2012 : R2022 Standard Specification for Centrifugal Pump, Shipboard Use

ASTM E 18 : 2024 Standard Test Methods for Rockwell Hardness of Metallic Materials
ASTM F 467 : 2024 Standard Specification for Nonferrous Nuts for General Use
ASTM E 8/E8M : 2024 Standard Test Methods for Tension Testing of Metallic Materials
ASTM E 92 : 2023 Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials
ASTM B 211/B211M : 2023 Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire
ASTM E 18 : 2022 Standard Test Methods for Rockwell Hardness of Metallic Materials
ASTM B 574 : 2023 Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Molybdenum-Chromium, Low-Carbon Nickel-Molybdenum-Chromium-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten Alloy Rod and Bar
ASTM B 211/B211M : 2019 Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire
ASTM E 478 : 2024 Standard Test Methods for Chemical Analysis of Copper Alloys
ASTM E 165/E165M : 2023 Standard Practice for Liquid Penetrant Testing for General Industry
ASTM B 574 : 2018 Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Molybdenum-Chromium, Low-Carbon Nickel-Molybdenum-Chromium-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten Alloy Rod
ASTM D 3951 : 2018 Standard Practice for Commercial Packaging
ASTM E 92 : 2017 Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials
ASTM D 3951 : 2018 : R2023 Standard Practice for Commercial Packaging
ASTM E 8/E8M : 2022 Standard Test Methods for Tension Testing of Metallic Materials
ASTM E 478 : 2008 : R2017 Standard Test Methods for Chemical Analysis of Copper Alloys
ASTM F 606/F606M : 2024 Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets
ASTM F 1470 : 2019 Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection
ASTM F 1470 : 2024 Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection
ASTM F 606/F606M : 2021 Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets
ASTM F 788 : 2020 Standard Specification for Surface Discontinuities of Bolts, Screws, Studs, and Rivets, Inch and Metric Series
ASTM E 165/E165M : 2018 Standard Practice for Liquid Penetrant Testing for General Industry

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.