ASTM F 538 : 2021
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Terminology Relating to Characteristics and Performance of Tires
Available format(s)
Hardcopy , PDF
Superseded date
24-05-2024
Superseded by
Language(s)
English
Published date
04-05-2021
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
F 09
|
| DocumentType |
Reference Material
|
| Pages |
11
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This terminology primarily covers definitions for technical terms that occur in ASTM Committee F09 standards on the characteristics and performance of tires.
1.2Definitions for terms that may also be used in other technologies, such as vehicle behavior, are worded to cover both areas.
1.3When any definition in this terminology (that does not have the limiting phrase) is quoted out of context, editorially insert the limiting phrase in a tire after the dash following the term. This will properly limit the field of application of the term and definition.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM F 762/F762M : 2008 : R2020 : EDT 1 | Standard Test Method for Determining Change in Groove (or Void) Depth With Distance Traveled for Passenger Car Tires |
| ASTM F 1502 : 2005 : R2016 | Standard Test Method for Static Measurements on Tires for Passenger Cars, Light Trucks, and Medium Duty Vehicles |
| ASTM F 724 : 1994 : REV A : R2016 | Standard Test Method for Outdoor Evaluation of Tire Sidewall Component Cracking Resistance |
| ASTM F 2871 : 2016 | Standard Specification for 245/70R19.5 136/134M Radial Truck Standard Reference Test Tire |
| ASTM F 2838 : 2017 | Standard Practice for Accelerated Laboratory Aging of Radial Passenger Car and Light Truck Tires through Load Range E for the Laboratory Generation of Belt Separation |
| ASTM F 1805 : 2020 | Standard Test Method for Single Wheel Driving Traction in a Straight Line on Snow- and Ice-Covered Surfaces |
| ASTM F 2869 : 2010 : R2016 | Standard Practice for Radial Light Truck Tires to Establish Equivalent Test Severity Between a 1.707-m (67.23-in.) Diameter Rotating Roadwheel and a Flat Surface |
| ASTM F 1112 : 2006 : REV A : R2018 : EDT 1 | Standard Test Method for Static Testing of Tubeless Pneumatic Tires for Rate of Loss of Inflation Pressure |
| ASTM F 1649 : 2020 | Standard Test Methods for Evaluating Wet Braking Traction Performance of Passenger Car Tires on Vehicles Equipped with Anti-Lock Braking Systems |
| ASTM F 870 : 1994 : R2016 | Standard Practice for Tread Footprints of Passenger Car Tires Groove Area Fraction and Dimensional Measurements |
| ASTM F 2493 : 2020 | Standard Specification for P225/60R16 97S Radial Standard Reference Test Tire |
| ASTM F 2663 : 2015 | Standard Test Method for Bead Unseating of Tubeless Passenger and Light Truck Tires |
| ASTM F 1572 : 2008 : R2015 | Standard Test Methods for Tire Performance Testing on Snow and Ice Surfaces |
| ASTM F 1016 : 2007 : R2020 | Standard Practice for Linear Tire Treadwear Data Analysis |
| ASTM F 811 : 2002 : R2016 | Standard Practice for Accelerometer Use in Vehicles for Tire Testing |
| ASTM F 2870 : 2019 | Standard Specification for 315/70R22.5 154/150L Radial Truck Standard Reference Test Tire |
| ASTM F 421 : 2015 : R2021 | Standard Test Method for Measuring Groove and Void Depth in Passenger Car Tires |
| ASTM F 408 : 1999 : R2015 | Standard Test Method for Tires for Wet Traction in Straight-Ahead Braking, Using a Towed Trailer |
| ASTM F 1426 : 2020 | Standard Practice for Identifying Tire Tread Surface Irregular Wear Patterns Resulting from Tire Use |
| ASTM F 1923 : 1998 : R2014 | Standard Test Method for Tires, Pneumatic, Low Speed, Off Highway |
| ASTM F 2779 : 2010 : R2016 | Standard Practice for Commercial Radial Truck-Bus Tires to Establish Equivalent Test Severity Between a 1.707-m (67.23-in.) Diameter Roadwheel and a Flat Surface |
| ASTM F 377 : 2003 : R2015 | Standard Practice for Calibration of Braking/Tractive Measuring Devices for Testing Tires |
| ASTM D 6700 : 2019 | Standard Guide for Use of Scrap Tires as Tire-Derived Fuel |
| ASTM F 1922 : 1998 : R2014 | Standard Test Method for Tires, Pneumatic, Vehicular, Highway |
| ASTM F 559 : 2005 : R2017 | Standard Test Method for Measuring Length of Road Test Courses Using a Fifth Wheel |
| ASTM F 1971 : 2012 : R2018 | Standard Test Method for Electrical Resistance of Tires Under Load On the Test Bench |
| ASTM F 2872 : 2019 | Standard Specification for 225/75R16C 116/114S M+S Radial Light Truck Standard Reference Test Tire |
| ASTM F 457 : 2004 : R2017 | Standard Test Method for Speed and Distance Calibration of Fifth Wheel Equipped With Either Analog or Digital Instrumentation |
| ASTM E 1136 : 2019 | Standard Specification for P195/75R14 Radial Standard Reference Test Tire |
| ASTM E 867 : 2006 : R2020 | Standard Terminology Relating to Vehicle-Pavement Systems |
| ASTM F 551/F551M : 2016 | Standard Practice for Using a 1.707-m [67.23-in.] Diameter Laboratory Test Roadwheel in Testing Tires |
| ASTM F 1035 : 2003 : R2015 | Standard Practice for Use of Rubber-Cord Pie Disk to Demonstrate the Discernment Capability of a Tire X-ray Imaging System |
| ASTM F 1806 : 2014 | Standard Practice for Tire Testing Operations–Basic Concepts and Terminology for Reference Tire Use |
| ASTM F 1650 : 2021 | Standard Practice for Evaluating Tire Traction Performance Data Under Varying Test Conditions |
| ASTM F 1364 : 2003 : R2015 | Standard Practice for Use of a Calibration Device to Demonstrate the Inspection Capability of an Interferometric Laser Imaging Nondestructive Tire Inspection System |
| ASTM F 2803 : 2009 : R2015 | Standard Test Method for Evaluating Rim Slip Performance of Tires and Wheels |
| ASTM F 1923 : 2021 | Standard Test Method for Tires, Pneumatic, Low Speed, Off Highway |
| ASTM F 414 : 2021 | Standard Test Method for Energy Absorbed by a Tire When Deformed by Slow-Moving Plunger |
| ASTM F 1922 : 2021 | Standard Test Method for Tires, Pneumatic, Vehicular, Highway |
| ASTM F 1806 : 2021 | Standard Practice for Tire Testing Operations–Basic Concepts and Terminology for Reference Tire Use |
| ASTM F 2803 : 2021 | Standard Test Method for Evaluating Rim Slip Performance of Tires and Wheels |
| ASTM F 1572 : 2021 | Standard Test Methods for Tire Performance Testing on Snow and Ice Surfaces |
| ASTM F 1046 : 2021 | Standard Guide for Preparing Artificially Worn Passenger and Light Truck Tires for Testing |
| ASTM F 3015 : 2021 | Standard Test Method for Accelerated Laboratory Roadwheel Generation of Belt Separation in Radial Passenger Car and Light Truck Tires through Load Range E |
| ASTM F 408 : 2021 | Standard Test Method for Tires for Wet Traction in Straight-Ahead Braking, Using a Towed Trailer |
| ASTM F 2663 : 2021 : REV A | Standard Test Method for Bead Unseating of Tubeless Passenger and Light Truck Tires |
| ASTM F 414 : 2015 | Standard Test Method for Energy Absorbed by a Tire When Deformed by Slow-Moving Plunger |
| ASTM D 6270 : 2020 | Standard Practice for Use of Scrap Tires in Civil Engineering Applications |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.