ASTM F 562 : 2013 : REDLINE
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Wrought 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy for Surgical Implant Applications (UNS R30035)
11-02-2022
English
01-03-2013
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 13.01, 2015 Covers requirements of wrought 35cobalt-35nickel-20chromium-10molybdenum alloy (UNS R30035) in the form of bar and wire, used for the manufacture of surgical implants.
| Committee |
F 04
|
| DocumentType |
Redline
|
| Pages |
8
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
1.1This specification covers requirements of wrought 35cobalt-35nickel-20chromium-10molybdenum alloy (UNS R30035) in the form of bar and wire, used for the manufacture of surgical implants. This alloy depends on combinations of work strengthening and aging to attain a variety of combinations of strength and ductility.
1.2The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
| ASTM F 2068 : 2015 : REDLINE | Standard Specification for Femoral Prostheses—Metallic Implants |
| CSA ISO 10993-12 : 98(R2002) | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - SAMPLE PREPARATION AND REFERENCE MATERIALS |
| ASTM F 1357 : 2014 : REDLINE | Standard Specification for Articulating Total Wrist Implants |
| ASTM F 2665 : 2009 : R2014 | Standard Specification for Total Ankle Replacement Prosthesis |
| NBR 15752-1 : 2015 | IMPLANTS FOR ORTHOPEDICS - SHOULDER PROSTHESIS - PART 1: SPECIFICATIONS |
| NBR 15719 : 2016 | IMPLANTS FOR ORTHOPEDICS - HIP JOINT PROSTHESES - SPECIFICATION FOR ACETABULAR PROSTHESES |
| AAMI ISO 27186 : 2010 | ACTIVE IMPLANTABLE MEDICAL DEVICES - FOUR-POLE CONNECTOR SYSTEM FOR IMPLANTABLE CARDIAC RHYTHM MANAGEMENT DEVICES - DIMENSIONAL AND TEST REQUIREMENTS |
| ASTM F 2527 : 2016 : REDLINE | Standard Specification for Wrought Seamless and Welded and Drawn Cobalt Alloy Small Diameter Tubing for Surgical Implants (UNS R30003, UNS R30008, UNS R30035, UNS R30605, and UNS R31537) |
| 08/30191626 DC : DRAFT OCT 2008 | BS ISO 27186 - ACTIVE IMPLANTABLE MEDICAL DEVICES - FOUR-POLE CONNECTOR SYSTEM FOR IMPLANTABLE CARDIAC RHYTHM MANAGEMENT DEVICES - DIMENSIONAL AND TEST REQUIREMENTS |
| BS ISO 27186:2010 | Active implantable medical devices. Four-pole connector system for implantable cardiac rhythm management devices. Dimensional and test requirements |
| ASTM F 1672 : 2014 : REDLINE | Standard Specification for Resurfacing Patellar Prosthesis |
| ASTM F 981 : 2004 | Standard Practice for Assessment of Compatibility of Biomaterials for Surgical Implants with Respect to Effect of Materials on Muscle and Bone |
| ASTM F 982 : 1986 : R2002 | Standard Specification for Disclosure of Characteristics of Surgically Implanted Clamps for Carotid Occlusion |
| ASTM F 2665 : 2009 | Standard Specification for Total Ankle Replacement Prosthesis |
| ASTM F 2027 : 2016 : REDLINE | Standard Guide for Characterization and Testing of Raw or Starting Materials for Tissue-Engineered Medical Products |
| ASTM F 763 : 2004 | Standard Practice for Short-Term Screening of Implant Materials |
| ASTM F 981 : 2004 : R2016 | Standard Practice for Assessment of Compatibility of Biomaterials for Surgical Implants with Respect to Effect of Materials on Muscle and Insertion into Bone |
| ASTM F 961 : 2014 : REDLINE | Standard Specification for 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Forgings for Surgical Implants (UNS R30035) |
| ISO 27186:2010 | Active implantable medical devices Four-pole connector system for implantable cardiac rhythm management devices - Dimensional and test requirements |
| ASTM F 763 : 2004 : R2010 | Standard Practice for Short-Term Screening of Implant Materials |
| ASTM F 982 : 1986 : R2008 | Standard Specification for Disclosure of Characteristics of Surgically Implanted Clamps for Carotid Occlusion (Withdrawn 2017) |
| ASTM F 982 : 1986 : R1998 | Standard Specification for Disclosure of Characteristics of Surgically Implanted Clamps for Carotid Occlusion |
| ASTM F 763 : 2004 : R2016 | Standard Practice for Short-Term Screening of Implant Materials |
| ASTM F 1542 : 1994 : R2000 | Standard Specification for the Requirements and Disclosure of Self-Closing Aneurysm Clips (Withdrawn 2009) |
| ASTM F 981 : 2004 : R2010 | Standard Practice for Assessment of Compatibility of Biomaterials for Surgical Implants with Respect to Effect of Materials on Muscle and Bone |
| ASTM F 2180 : 2017 : REDLINE | Standard Specification for Metallic Implantable Strands and Cables |
| ASTM F 2091 : 2015 : REDLINE | Standard Specification for Acetabular Prostheses |
| ASTM F 2083 : 2012 : REDLINE | Standard Specification for Knee Replacement Prosthesis |
| SAE AMS 2269 : 2006 | CHEMICAL CHECK ANALYSIS LIMITS, NICKEL, NICKEL ALLOYS, AND COBALT ALLOYS |
| SAE AMS2630C | Inspection, Ultrasonic Product Over 0.5 Inch (12.7 mm) Thick |
| SAE AMS 2632 : 1995 | INSPECTION, ULTRASONIC, OF THIN MATERIALS 0.5 INCH (12.77 MM) AND UNDER IN CROSS-SECTIONAL THICKNESS |
| ISO 5832-6:1997 | Implants for surgery Metallic materials Part 6: Wrought cobalt-nickel-chromium-molybdenum alloy |
| ISO 6892:1998 | Metallic materials Tensile testing at ambient temperature |
| IEEE/ASTM SI_10-2010 | American National Standard for Metric Practice |
| ISO 9001:2015 | Quality management systems — Requirements |
| ASTM E 354 : 2014 : REDLINE | Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys |
| ASTM E 8/E8M : 2016-09 | TEST METHODS FOR TENSION TESTING OF METALLIC MATERIALS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.