ASTM G 122 : 1996
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Evaluating the Effectiveness of Cleaning Agents
11-11-2014
10-10-1996
CONTAINED IN VOL. 14.04, 2015 Defines a procedure for evaluating the capability of cleaning agents and processes to remove contamination to the desired level.
| Committee |
G 04
|
| DocumentType |
Test Method
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
1.1 This test method covers a procedure for evaluating the capability of cleaning agents and processes to remove contamination to the desired level.
1.2 The test coupons provide a relatively rough surface to which contamination can easily adhere.
1.3 The capability of a particular cleaning agent depends upon the method by which it is used and the characteristics of the article being cleaned, such as size, shape, and material. Final evaluation of the cleaning agent should include testing of actual products and production process.
1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in Note 2.
| ASTM D 6361/D6361M : 1998 : R2010 : EDT 1 | Standard Guide for Selecting Cleaning Agents and Processes |
| BS EN ISO 14644-13:2017 | Cleanrooms and associated controlled environments Cleaning of surfaces to achieve defined levels of cleanliness in terms of particle and chemical classifications |
| ASTM G 93 : 2003 : EDT 1 | Standard Practice for Cleaning Methods and Cleanliness Levels for Material and Equipment Used in Oxygen-Enriched Environments |
| ASTM G 127 : 2015 : REDLINE | Standard Guide for the Selection of Cleaning Agents for Oxygen-Enriched Systems |
| ASTM G 93 : 2003 : R2011 | Standard Practice for Cleaning Methods and Cleanliness Levels for Material and Equipment Used in Oxygen-Enriched Environments |
| BS EN ISO 15001:2011 | Anaesthetic and respiratory equipment. Compatibility with oxygen |
| DEFSTAN 68-278/2(2016) : 2016 | CLEANING PROCEDURES & STANDARDS FOR NAVAL OXYGEN SYSTEM COMPONENTS |
| BS ISO 15001 : 2003 AMD 15145 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - COMPATIBILITY WITH OXYGEN |
| ASTM G 131 : 1996 : R2008 | Standard Practice for Cleaning of Materials and Components by Ultrasonic Techniques |
| EN ISO 14644-13:2017 | Cleanrooms and associated controlled environments - Part 13: Cleaning of surfaces to achieve defined levels of cleanliness in terms of particle and chemical classifications (ISO 14644-13:2017) |
| ASTM G 131 : 1996 : R2016 | Standard Practice for Cleaning of Materials and Components by Ultrasonic Techniques |
| I.S. EN ISO 15001:2011 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - COMPATIBILITY WITH OXYGEN (ISO 15001:2010) |
| UNI EN ISO 15001 : 2012 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - COMPATIBILITY WITH OXYGEN |
| ASTM D 6361 : 1998 | Standard Guide for Selecting Cleaning Agents and Processes |
| DIN EN ISO 14644-13:2016-03 (Draft) | CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - PART 13: CLEANING OF SURFACES TO ACHIEVE DEFINED LEVELS OF CLEANLINESS IN TERMS OF PARTICLE AND CHEMICAL CLASSIFICATIONS (ISO 14644-13:2017) |
| ASTM G 131 : 1996 : R2016 : EDT 1 | Standard Practice for Cleaning of Materials and Components by Ultrasonic Techniques |
| DIN EN ISO 15001:2012-06 | Anaesthetic and respiratory equipment - Compatibility with oxygen (ISO 15001:2010) |
| ASTM G 131 : 1996 : R2002 | Standard Practice for Cleaning of Materials and Components by Ultrasonic Techniques |
| ISO 14644-13:2017 | Cleanrooms and associated controlled environments — Part 13: Cleaning of surfaces to achieve defined levels of cleanliness in terms of particle and chemical classifications |
| CSA Z15001 : 2012 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - COMPATIBILITY WITH OXYGEN |
| CAN/CSA-Z15001:12 (R2017) | Anaesthetic and respiratory equipment - Compatibility with oxygen (Adopted ISO 15001:2010, second edition, 2010-06-01, with Canadian deviations) |
| I.S. EN ISO 14644-13:2017 | CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - PART 13: CLEANING OF SURFACES TO ACHIEVE DEFINED LEVELS OF CLEANLINESS IN TERMS OF PARTICLE AND CHEMICAL CLASSIFICATIONS (ISO 14644-13:2017) |
| ISO 15001:2010 | Anaesthetic and respiratory equipment Compatibility with oxygen |
| EN ISO 15001:2011 | Anaesthetic and respiratory equipment - Compatibility with oxygen (ISO 15001:2010) |
| SAE ARP1176A | Oxygen System and Component Cleaning |
| ASTM F 3127 : 2016 | Standard Guide for Validating Cleaning Processes Used During the Manufacture of Medical Devices |
| ASTM D 6361/D6361M : 1998 : R2015 | Standard Guide for Selecting Cleaning Agents and Processes |
| ASTM G 126 : 2016 : REDLINE | Standard Terminology Relating to the Compatibility and Sensitivity of Materials in Oxygen Enriched Atmospheres |
| ASTM G 131 : 1996 | Standard Practice for Cleaning of Materials and Components by Ultrasonic Techniques |
| UNE-EN ISO 15001:2012 | Anaesthetic and respiratory equipment - Compatibility with oxygen (ISO 15001:2010) |
| ASTM E 177 : 2014 : REDLINE | Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods |
| ASME B46.1 : 2009 | SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.