• Shopping Cart
    There are no items in your cart

ASTM G 152 : 2013 : R2021

Current

Current

The latest, up-to-date edition.

Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

12-07-2021

€56.53
Excluding VAT

Committee
G 03
DocumentType
Standard Practice
Pages
10
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

1.1This practice covers the basic principles and operating procedures for using open flame carbon-arc light and water apparatus intended to reproduce the weathering effects that occur when materials are exposed to sunlight (either direct or through window glass) and moisture as rain or dew in actual use. This practice is limited to the procedures for obtaining, measuring, and controlling conditions of exposure. A number of exposure procedures are listed in an appendix; however, this practice does not specify the exposure conditions best suited for the material to be tested.

Note 1:Practice G151 describes performance criteria for all exposure devices that use laboratory light sources. This practice replaces Practice G23, which describes very specific designs for devices used for carbon-arc exposures. The apparatus described in Practice G23 is covered by this practice.

1.2Test specimens are exposed to filtered open flame carbon arc light under controlled environmental conditions. Different filters are described.

1.3Specimen preparation and evaluation of the results are covered in methods or specifications for specific materials. General guidance is given in Practice G151 and ISO 4892-1. More specific information about methods for determining the change in properties after exposure and reporting these results is described in Practice D5870.

1.4The values stated in SI units are to be regarded as the standard.

1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.5.1Should any ozone be generated from the operation of the light source, it shall be carried away from the test specimens and operating personnel by an exhaust system.

1.6This practice is technically similar to ISO 4892-4.

1.7This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM A 742/A742M : 2023 Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe
ASTM F 668 : 2017 : R2022 Standard Specification for Polyvinyl Chloride (PVC), Polyolefin and Other Polymer-Coated Steel Chain Link Fence Fabric
ASTM F 1665 : 2008 : R2022 Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence
ASTM D 3794 : 2022 Standard Guide for Testing Coil Coatings
ASTM D 3361/D3361M : 2022 Standard Practice for Unfiltered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings
ASTM G 178 : 2016 : R2023 Standard Practice for Determining the Activation Spectrum of a Material (Wavelength Sensitivity to an Exposure Source) Using the Sharp Cut-On Filter or Spectrographic Technique
ASTM G 141 : 2009 : R2021 Standard Guide for Addressing Variability in Exposure Testing of Nonmetallic Materials
ASTM F 1664 : 2008 : R2022 Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Tension Wire Used with Chain-Link Fence
ASTM D 822/D822M : 2013 : R2018 Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings
ASTM D 3794 : 2018 Standard Guide for Testing Coil Coatings
ASTM C 1442 : 2014 : R2021 Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus
ASTM G 178 : 2016 Standard Practice for Determining the Activation Spectrum of a Material (Wavelength Sensitivity to an Exposure Source) Using the Sharp Cut-On Filter or Spectrographic Technique
ASTM G 141 : 2009 : R2013 Standard Guide for Addressing Variability in Exposure Testing of Nonmetallic Materials
ASTM D 1499 : 2013 : R2021 Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Plastics
ASTM G 147 : 2017 Standard Practice for Conditioning and Handling of Nonmetallic Materials for Natural and Artificial Weathering Tests
ASTM D 750 : 2012 : R2021 Standard Practice for Rubber Deterioration Using Artificial Weathering Apparatus
ASTM D 3815/D3815M : 2005 : R2019 Standard Practice for Accelerated Weathering of Pressure-Sensitive Tapes by Open-Flame Carbon-Arc Exposure Apparatus
ASTM D 3361/D3361M : 2013 : R2018 Standard Practice for Unfiltered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings
ASTM E 2136 : 2004 : R2013 Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—Durability (Withdrawn 2022)
ASTM D 5031/D5031M : 2013 : R2018 Standard Practice for Enclosed Carbon-Arc Exposure Tests of Paint and Related Coatings
ASTM C 1530/C1530M : 2004 : R2019 Standard Specification for Non-Asbestos Fiber-Cement Roofing Shakes, Shingles, and Slates with Designed Varying Profiles and Thicknesses
ASTM G 156 : 2017 Standard Practice for Selecting and Characterizing Weathering Reference Materials
ASTM F 1665 : 2008 : R2018 Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence
ASTM D 3451 : 2006 : R2017 Standard Guide for Testing Coating Powders and Powder Coatings
ASTM A 742/A742M : 2020 Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe
ASTM D 6577 : 2015 : R2019 Standard Guide for Testing Industrial Protective Coatings
ASTM F 668 : 2017 Standard Specification for Polyvinyl Chloride (PVC), Polyolefin and Other Polymer-Coated Steel Chain Link Fence Fabric
ASTM F 1664 : 2008 : R2018 Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Tension Wire Used with Chain-Link Fence
ASTM G 151 : 2019 Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources

ASTM G 113 : 2024 Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials
ASTM E 691 : 2020 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E 691 : 2023 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E 691 : 2022 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM D 5870 : 2022 Standard Practice for Calculating Property Retention Index of Plastics
ASTM E 691 : 2021 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM G 113 : 2016 Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials
ASTM G 113 : 2022 Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials
ASTM D 5870 : 2016 Standard Practice for Calculating Property Retention Index of Plastics

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.