ASTM G 190 : 2015
Current
Current
The latest, up-to-date edition.
Standard Guide for Developing and Selecting Wear Tests (Withdrawn 2021)
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
12-11-2019
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 03.02, 2015 Defines general information for the development and selection of a wear test for an intended application.
| Committee |
G 02
|
| DocumentType |
Guide
|
| Pages |
5
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This guide covers general information for the development and selection of a wear test for an intended application.
| ASTM E 2789 : 2010 | Standard Guide for Fretting Fatigue Testing |
| ASTM E 2789 : 2010 : R2015 | Standard Guide for Fretting Fatigue Testing |
| ASTM D 2266 : 2001 | Standard Test Method for Wear Preventive Characteristics of Lubricating Grease (Four-Ball Method) |
| ASTM D 3704 : 1996 : R2012 | Standard Test Method for Wear Preventive Properties of Lubricating Greases Using the (Falex) Block on Ring Test Machine in Oscillating Motion |
| ASTM G 98 : 2017 : REDLINE | Standard Test Method for Galling Resistance of Materials |
| ASTM D 2670 : 1995 : R2016 | Standard Test Method for Measuring Wear Properties of Fluid Lubricants (Falex Pin and Vee Block Method) |
| ASTM D 3702 : 1994 : R2009 | Standard Test Method for Wear Rate and Coefficient of Friction of Materials in Self-Lubricated Rubbing Contact Using a Thrust Washer Testing Machine |
| ASTM G 40 : 2021 | Standard Terminology Relating to Wear and Erosion |
| ASTM G 32 : 2016 : REDLINE | Standard Test Method for Cavitation Erosion Using Vibratory Apparatus |
| ASTM G 65 : 2000 | Standard Test Method for Measuring Abrasion Using the Dry Sand/Rubber Wheel Apparatus |
| ASTM D 2266 : 2001 : R2015 | Standard Test Method for Wear Preventive Characteristics of Lubricating Grease (Four-Ball Method) |
| ASTM G 119 : 2009 : R2021 | Standard Guide for Determining Synergism Between Wear and Corrosion |
| ASTM D 4170 : 2010 | Standard Test Method for Fretting Wear Protection by Lubricating Greases |
| ASTM D 2714 : 1994 : R1998 | Standard Test Method for Calibration and Operation of the Falex Block-on-Ring Friction and Wear Testing Machine |
| ASTM G 181 : 2021 | Standard Test Method for Conducting Friction Tests of Piston Ring and Cylinder Liner Materials Under Lubricated Conditions |
| ASTM D 3704 : 1996 : R2001 | Standard Test Method for Wear Preventive Properties of Lubricating Greases Using the (Falex) Block on Ring Test Machine in Oscillating Motion |
| ASTM D 3704 : 1996 : R2017 | Standard Test Method for Wear Preventive Properties of Lubricating Greases Using the (Falex) Block on Ring Test Machine in Oscillating Motion |
| ASTM D 2670 : 1995 : R2004 | Standard Test Method for Measuring Wear Properties of Fluid Lubricants (Falex Pin and Vee Block Method) |
| ASTM D 2714 : 1994 : R2014 | Standard Test Method for Calibration and Operation of the Falex Block-on-Ring Friction and Wear Testing Machine |
| ASTM G 132 : 1996 | Standard Test Method for Pin Abrasion Testing |
| ASTM G 56 : 2010-05 | TEST METHOD FOR ABRASIVENESS OF INK-IMPREGNATED FABRIC PRINTER RIBBONS AND OTHER WEB MATERIALS |
| ASTM D 4170 : 1997 | Standard Test Method for Fretting Wear Protection by Lubricating Greases |
| ASTM D 3702 : 1994 : R1999 | Standard Test Method for Wear Rate and Coefficient of Friction of Materials in Self-Lubricated Rubbing Contact Using a Thrust Washer Testing Machine |
| ASTM D 4172 : 1994 : R2010 | Standard Test Method for Wear Preventive Characteristics of Lubricating Fluid (Four-Ball Method) |
| ASTM G 32 : 2016 : R2021 : EDT 1 | Standard Test Method for Cavitation Erosion Using Vibratory Apparatus |
| ASTM G 118 : 1996 | Standard Guide for Recommended Format of Wear Test Data Suitable for Databases |
| ASTM D 2266 : 2001 : R2008 | Standard Test Method for Wear Preventive Characteristics of Lubricating Grease (Four-Ball Method) |
| ASTM G 77 : 2017 : REDLINE | Standard Test Method for Ranking Resistance of Materials to Sliding Wear Using Block-on-Ring Wear Test |
| ASTM D 2714 : 1994 : R2003 | Standard Test Method for Calibration and Operation of the Falex Block-on-Ring Friction and Wear Testing Machine |
| ASTM D 2714 : 1994 : R2009 | Standard Test Method for Calibration and Operation of the Falex Block-on-Ring Friction and Wear Testing Machine |
| ASTM F 732 : 2017 : REDLINE | Standard Test Method for Wear Testing of Polymeric Materials Used in Total Joint Prostheses |
| ASTM D 3702 : 1994 : R2019 | Standard Test Method for Wear Rate and Coefficient of Friction of Materials in Self-Lubricated Rubbing Contact Using a Thrust Washer Testing Machine |
| ASTM D 4170 : 2016 | Standard Test Method for Fretting Wear Protection by Lubricating Greases |
| ASTM D 2714 : 1994 : R2019 | Standard Test Method for Calibration and Operation of the Falex Block-on-Ring Friction and Wear Testing Machine |
| ASTM G 119 : 1993 : R1998 | Standard Guide for Determining Synergism Between Wear and Corrosion |
| ASTM G 40 : 2021 : REV A | Standard Terminology Relating to Wear and Erosion |
| ASTM D 4172 : 2018 | Standard Test Method for Wear Preventive Characteristics of Lubricating Fluid (Four-Ball Method) |
| ASTM G 117 : 1998 | Standard Guide for Calculating and Reporting Measures of Precision Using Data from Interlaboratory Wear or Erosion Tests |
| ASTM D 4172 : 1994 : R2004 | Standard Test Method for Wear Preventive Characteristics of Lubricating Fluid (Four-Ball Method) |
| ASTM G 134 : 1995 : R2001 : EDT 1 | Standard Test Method for Erosion of Solid Materials by a Cavitating Liquid Jet |
| ASTM D 4172 : 1994 : R2016 | Standard Test Method for Wear Preventive Characteristics of Lubricating Fluid (Four-Ball Method) |
| ASTM G 99 : 2017 : REDLINE | Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus |
| ASTM D 4172 : 1994 : R2004 : EDT 1 | Standard Test Method for Wear Preventive Characteristics of Lubricating Fluid (Four-Ball Method) |
| ASTM D 3704 : 1996 : R2006 | Standard Test Method for Wear Preventive Properties of Lubricating Greases Using the (Falex) Block on Ring Test Machine in Oscillating Motion |
| ASTM G 133 : 1995 | Standard Test Method for Linearly Reciprocating Ball-on-Flat Sliding Wear |
| ASTM D 4172 : 1994 : R1999 | Standard Test Method for Wear Preventive Characteristics of Lubricating Fluid (Four-Ball Method) |
| ASTM D 3702 : 1994 : R2014 | Standard Test Method for Wear Rate and Coefficient of Friction of Materials in Self-Lubricated Rubbing Contact Using a Thrust Washer Testing Machine |
| ASTM G 75 : 2015 : REDLINE | Standard Test Method for Determination of Slurry Abrasivity (Miller Number) and Slurry Abrasion Response of Materials (SAR Number) |
| ASTM G 76 : 2013-07 | TEST METHOD FOR CONDUCTING EROSION TESTS BY SOLID PARTICLE IMPINGEMENT USING GAS JETS |
| ASTM G 119 : 2009 : R2016 | Standard Guide for Determining Synergism Between Wear and Corrosion |
| ASTM D 2670 : 1995 : R2010 | Standard Test Method for Measuring Wear Properties of Fluid Lubricants (Falex Pin and Vee Block Method) |
| ASTM G 83 : 1996 | Standard Test Method for Wear Testing with a Crossed-Cylinder Apparatus (Withdrawn 2005) |
| ASTM G 181 : 2011 : R2017 | Standard Test Method for Conducting Friction Tests of Piston Ring and Cylinder Liner Materials Under Lubricated Conditions |
| ASTM G 32 : 2016 | Standard Test Method for Cavitation Erosion Using Vibratory Apparatus |
| ASTM G 105 : 2016 | Standard Test Method for Conducting Wet Sand/Rubber Wheel Abrasion Tests |
| ASTM D 3702 : 1994 : R2004 | Standard Test Method for Wear Rate and Coefficient of Friction of Materials in Self-Lubricated Rubbing Contact Using a Thrust Washer Testing Machine |
| ASTM G 40 : 2017 | Standard Terminology Relating to Wear and Erosion |
| ASTM D 2266 : 1991 : R1996 | Standard Test Method for Wear Preventive Characteristics of Lubricating Grease (Four-Ball Method) |
| ASTM D 3704 : 1996 | Standard Test Method for Wear Preventive Properties of Lubricating Greases Using the (Falex) Block on Ring Test Machine in Oscillating Motion |
| ASTM D 2670 : 2019 | Standard Test Method for Measuring Wear Properties of Fluid Lubricants (Falex Pin and Vee Block Method) |
| ASTM D 2670 : 1995 : R1999 | Standard Test Method for Measuring Wear Properties of Fluid Lubricants (Falex Pin and Vee Block Method) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.