ASTM G 195 : 2022
Current
The latest, up-to-date edition.
Standard Guide for Conducting Wear Tests Using a Rotary Platform Abraser
Hardcopy , PDF
English
08-06-2022
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
G 02
|
| DocumentType |
Guide
|
| Pages |
11
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This guide covers and is intended to assist in establishing procedures for conducting wear tests of rigid or flexible materials utilizing the rotary platform abraser.
1.2The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.2.1Exception—Non-SI units are used when stating rotational speed.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM F 510/F510M : 2020 | Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method |
| ASTM D 1044 : 2019 | Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion by the Taber Abraser |
| ASTM F 2984 : 2013 : R2019 | Standard Specification for Segmental Panel System for the Grout-in-Place-Liner (GIPL) Rehabilitation Method of Existing Man-Entry Size Sewers, Culverts, and Conduits (Withdrawn 2024) |
| ASTM D 4060 : 2019 | Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser |
| ASTM C 1353/C1353M : 2020 : EDT 1 | Standard Test Method for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic Using a Rotary Platform Abraser |
| ASTM C 1803 : 2020 | Standard Guide for Abrasion Resistance of Mortar Surfaces Using a Rotary Platform Abraser |
| ASTM C 501 : 2021 | Standard Test Method for Relative Resistance to Wear of Unglazed Ceramic Tile by the Taber Abraser |
| ASTM D 3389 : 2021 | Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader) |
| ASTM D 7255 : 2022 | Standard Test Method for Abrasion Resistance of Leather (Rotary Platform, Abraser Method) |
| ASTM D 3489 : 2017 | Standard Test Methods for Microcellular Urethane Materials |
| ASTM F 1978 : 2018 | Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser |
| ASTM D 7932 : 2017 | Standard Specification for Printed, Pressure-Sensitive Adhesive Labels for Use in Extreme Distribution Environments |
| ASTM F 2051 : 2000 : R2014 | Standard Specification for Implantable Saline Filled Breast Prosthesis |
| ASTM C 957/C957M : 2017 | Standard Specification for High-Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Integral Wearing Surface |
| ASTM F 2068 : 2015 | Standard Specification for Femoral Prostheses—Metallic Implants (Withdrawn 2023) |
| ASTM D 3794 : 2022 | Standard Guide for Testing Coil Coatings |
| ASTM B 893 : 1998 : R2018 | Standard Specification for Hard-Coat Anodizing of Magnesium for Engineering Applications |
| ASTM C 957/C957M : 2017 : R2024 | Standard Specification for High-Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane with Integral Wearing Surface |
| ASTM D 5324 : 2016 : R2022 | Standard Guide for Testing Water-Borne Architectural Coatings |
| ASTM D 3451 : 2024 | Standard Guide for Testing Coating Powders and Powder Coatings |
| ASTM D 3794 : 2018 | Standard Guide for Testing Coil Coatings |
| ASTM B 893 : 2023 | Standard Specification for Hard-Coat Anodizing of Magnesium for Engineering Applications |
| ASTM F 1978 : 2022 | Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser |
| ASTM D 1044 : 2024 | Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion by the Taber Abraser |
| ASTM D 3451 : 2006 : R2017 | Standard Guide for Testing Coating Powders and Powder Coatings |
| ASTM D 7255 : 2022 : EDT 1 | Standard Test Method for Abrasion Resistance of Leather (Rotary Platform, Abraser Method) |
| ASTM G 40 : 2021 : REV A | Standard Terminology Relating to Wear and Erosion |
| ASTM D 5035 : 2011 : R2024 | Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method) |
| ASTM D 3884 : 2022 | Standard Guide for Abrasion Resistance of Textile Fabrics (Rotary Platform Abrader Method) |
| ASTM G 40 : 2022 | Standard Terminology Relating to Wear and Erosion |
| ASTM D 3730 : 2017 | Standard Guide for Testing High-Performance Interior Architectural Wall Coatings |
| ASTM G 40 : 2022 : REV A | Standard Terminology Relating to Wear and Erosion |
| ASTM D 3884 : 2009 : R2017 | Standard Guide for Abrasion Resistance of Textile Fabrics (Rotary Platform, Double-Head Method) |
| ASTM D 7255 : 2022 | Standard Test Method for Abrasion Resistance of Leather (Rotary Platform, Abraser Method) |
| ASTM F 2051 : 2000 : R2022 | Standard Specification for Implantable Saline-Filled Breast Prostheses |
| ASTM D 3489 : 2023 | Standard Test Methods for Microcellular Urethane Materials |
| ASTM D 5324 : 2016 | Standard Guide for Testing Water-Borne Architectural Coatings |
| ASTM D 5035 : 2011 : R2019 | Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method) |
| ASTM D 3730 : 2017 : R2022 | Standard Guide for Testing High-Performance Interior Architectural Wall Coatings |
| ASTM F 1978 : 2018 | Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.