ASTM G 215 : 2017
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Guide for Electrode Potential Measurement
Available format(s)
Hardcopy , PDF
Superseded date
24-05-2024
Superseded by
Language(s)
English
Published date
01-01-2017
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
G 01
|
| DocumentType |
Guide
|
| Pages |
7
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This guide provides guidance on the measurement of electrode potentials in laboratory and field studies both for corrosion potentials and polarized potentials.
1.2The values stated in SI units are to be regarded as standard. Any other units of measurements included in this standard are present because of their wide usage and acceptance.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM F 3268 : 2018 : REV A | Standard Guide for <emph type="bdit">in vitro</emph> Degradation Testing of Absorbable Metals |
| ASTM D 8370 : 2022 | Standard Test Method for Field Measurement of Electrochemical Impedance on Coatings and Linings |
| ASTM G 200 : 2020 | Standard Test Method for Measurement of Oxidation-Reduction Potential (ORP) of Soil |
| ASTM G 220 : 2020 | Standard Practice for Replacing Saturated Calomel Reference Electrode (SCE) for Measuring Electrode Potentials |
| ASTM G 108 : 2023 | Standard Test Methods for Electrochemical Reactivation (EPR) for Detecting Sensitization of AISI Type 304 and 304L Stainless Steels |
| ASTM G 51 : 2023 | Standard Test Method for Measuring pH of Soil for Use in Corrosion Evaluations |
| ASTM G 162 : 2023 | Standard Practice for Conducting and Evaluating Laboratory Corrosion Tests in Soils |
| ASTM G 218 : 2019 | Standard Guide for External Corrosion Protection of Ductile Iron Pipe Utilizing Polyethylene Encasement Supplemented by Cathodic Protection |
| ASTM F 2129 : 2008 | Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices |
| ASTM G 3 : 2014 : R2024 | Standard Practice for Conventions Applicable to Electrochemical Measurements in Corrosion Testing |
| ASTM F 746 : 2004 : R2014 | Standard Test Method for Pitting or Crevice Corrosion of Metallic Surgical Implant Materials |
| ASTM C 876 : 2022 : REV B | Standard Test Method for Corrosion Potentials of Uncoated Reinforcing Steel in Concrete |
| ASTM F 2129 : 2003 | Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices |
| ASTM F 3044 : 2020 | Standard Test Method for Evaluating the Potential for Galvanic Corrosion for Medical Implants |
| ASTM G 59 : 1997 | Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements |
| ASTM G 71 : 1981 : R1998 : EDT 1 | Standard Guide for Conducting and Evaluating Galvanic Corrosion Tests in Electrolytes |
| ASTM G 193 : 2020 : REV A | Standard Terminology and Acronyms Relating to Corrosion |
| ASTM F 2129 : 2004 | Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices |
| ASTM C 876 : 2022 : REV A | Standard Test Method for Corrosion Potentials of Uncoated Reinforcing Steel in Concrete |
| ASTM F 2129 : 2015 | Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices |
| ASTM F 2129 : 2006 | Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices |
| ASTM G 59 : 1997 : R2020 | Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements |
| ASTM G 97 : 2018 : R2022 | Standard Test Method for Laboratory Evaluation of Magnesium Sacrificial Anode Test Specimens for Underground Applications |
| ASTM G 106 : 1989 : R2015 | Standard Practice for Verification of Algorithm and Equipment for Electrochemical Impedance Measurements |
| ASTM C 876 : 2015 | Standard Test Method for Corrosion Potentials of Uncoated Reinforcing Steel in Concrete |
| ASTM F 3044 : 2014 | Test Method for Standard Test Method for Evaluating the Potential for Galvanic Corrosion for Medical Implants |
| ASTM C 876 : 2022 | Standard Test Method for Corrosion Potentials of Uncoated Reinforcing Steel in Concrete |
| ASTM G 5 : 1994 | Standard Reference Test Method for Making Potentiostatic and Potentiodynamic Anodic Polarization Measurements |
| ASTM G 102 : 1989 : R2015 : EDT 1 | Standard Practice for Calculation of Corrosion Rates and Related Information from Electrochemical Measurements |
| ASTM G 193 : 2022 | Standard Terminology and Acronyms Relating to Corrosion |
| ASTM F 2129 : 2017 : REV B | Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices |
| ASTM F 2129 : 2001 | Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices |
| ASTM G 97 : 1997 | Standard Test Method for Laboratory Evaluation of Magnesium Sacrificial Anode Test Specimens for Underground Applications |
| ASTM F 2129 : 2019 | Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices |
| ASTM F 2129 : 2017 : REV A | Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices |
| ASTM F 2129 : 2019 : REV A | Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices |
| ASTM G 5 : 1994 : R1999 | Standard Reference Test Method for Making Potentiostatic and Potentiodynamic Anodic Polarization Measurements |
| ASTM G 102 : 2023 | Standard Practice for Calculation of Corrosion Rates and Related Information from Electrochemical Measurements |
| ASTM G 5 : 2014 : EDT 1 | Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements |
| ASTM F 746 : 2004 : R2021 | Standard Test Method for Pitting or Crevice Corrosion of Metallic Surgical Implant Materials |
| ASTM G 106 : 1989 : R2023 | Standard Practice for Verification of Algorithm and Equipment for Electrochemical Impedance Measurements |
| ASTM F 2129 : 2017 | Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices |
| ASTM G 3 : 2014 : R2019 | Standard Practice for Conventions Applicable to Electrochemical Measurements in Corrosion Testing |
| ASTM G 59 : 2023 | Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements |
| ASTM G 5 : 2014 : R2021 | Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements |
| ASTM G 193 : 2020 | Standard Terminology and Acronyms Relating to Corrosion |
| ASTM G 193 : 2021 | Standard Terminology and Acronyms Relating to Corrosion |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.