ASTM G 46 : 1994 : R2018
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Guide for Examination and Evaluation of Pitting Corrosion
Available format(s)
Hardcopy , PDF
Superseded date
11-11-2021
Superseded by
ASTM G 46 : 1994 : R2013
ASTM G 46 : 1994 : R1999
ASTM G 46 : 1994 : R2005
ASTM G 46 : 2021
Language(s)
English
Published date
06-11-2018
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 03.02, 2015 Defines the selection of procedures that can be used in the identification and examination of pits and in the evaluation of pitting corrosion to evaluate the extent of its effect.
| Committee |
G 01
|
| DocumentType |
Guide
|
| Pages |
8
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This guide covers the selection of procedures that can be used in the identification and examination of pits and in the evaluation of pitting (See Terminology G15) corrosion to determine the extent of its effect.
1.2This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.3This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM G 184 : 2006 | Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using Rotating Cage |
| ASTM G 33 : 1999 : R2010 | Standard Practice for Recording Data from Atmospheric Corrosion Tests of Metallic-Coated Steel Specimens |
| ASTM G 107 : 1995 : R2008 | Standard Guide for Formats for Collection and Compilation of Corrosion Data for Metals for Computerized Database Input |
| ASTM G 87 : 2002 | Standard Practice for Conducting Moist SO<sub>2</sub> Tests |
| BS ISO 16784-2 : 2006 | CORROSION OF METALS AND ALLOYS - CORROSION AND FOULING IN INDUSTRIAL COOLING WATER SYSTEMS - PART 2: EVALUATION OF THE PERFORMANCE OF COOLING WATER TREATMENT PROGRAMMES USING A PILOT-SCALE TEST RIG |
| ASTM G 185 : 2006 : R2012 | Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using the Rotating Cylinder Electrode |
| ASTM G 184 : 2006 : R2012 | Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using Rotating Cage |
| ASTM D 6208 : 2007 : R2014 | Standard Test Method for Repassivation Potential of Aluminum and Its Alloys by Galvanostatic Measurement |
| NACE 11106 : 2006 | MONITORING AND ADJUSTMENT OF COOLING WATER TREATMENT OPERATING PARAMETERS |
| ASTM F 2111 : 2001 : REV A | Standard Practice for Measuring Intergranular Attack or End Grain Pitting on Metals Caused by Aircraft Chemical Processes |
| ASTM G 52 : 2000 | Standard Practice for Exposing and Evaluating Metals and Alloys in Surface Seawater |
| ASTM G 162 : 1999 | Standard Practice for Conducting and Evaluating Laboratory Corrosions Tests in Soils |
| ASTM G 184 : 2006 : R2016 | Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using Rotating Cage |
| ASTM G 202 : 2012 : R2016 | Standard Test Method for Using Atmospheric Pressure Rotating Cage |
| ASTM G 199:2009 | Standard Guide for Electrochemical Noise Measurement |
| ASTM G 202 : 2012 | Standard Test Method for Using Atmospheric Pressure Rotating Cage |
| ASTM G 157 : 1998 : R2018 | Standard Guide for Evaluating Corrosion Properties of Wrought Iron- and Nickel-Based Corrosion Resistant Alloys for Chemical Process Industries |
| ASTM G 107 : 1995 : R2002 | Standard Guide for Formats for Collection and Compilation of Corrosion Data for Metals for Computerized Database Input |
| ASTM F 1110 : 2009 | Standard Test Method for Sandwich Corrosion Test |
| ASTM G 50 : 2010 | Standard Practice for Conducting Atmospheric Corrosion Tests on Metals |
| ASTM G 71 : 1981 | GUIDE FOR CONDUCTING AND EVALUATING GALVANIC CORROSION TESTS IN ELECTROLYTES |
| ASME FFS 1 : 2007 | FITNESS-FOR-SERVICE |
| ASTM F 2111 : 2001 : REV A : R2017 | Standard Practice for Measuring Intergranular Attack or End Grain Pitting on Metals Caused by Aircraft Chemical Processes |
| BS EN ISO 16784-2:2008 | Corrosion of metals and alloys. Corrosion and fouling in industrial cooling water systems Evaluation of the performance of cooling water treatment programmes using a pilot-scale test rig |
| SAE AMS 2485 : 2016 | COATING, BLACK OXIDE |
| ASTM G 31 : 2012 : REV A | GUIDE FOR LABORATORY IMMERSION CORROSION TESTING OF METALS |
| ASTM G 71 : 1981 : R2014 | Standard Guide for Conducting and Evaluating Galvanic Corrosion Tests in Electrolytes |
| ASTM G 52 : 2000 : R2016 : EDT 1 | Standard Practice for Exposing and Evaluating Metals and Alloys in Surface Seawater |
| ASTM G 33 : 1999 | Standard Practice for Recording Data from Atmospheric Corrosion Tests of Metallic-Coated Steel Specimens |
| ASTM G 150 : 2013 | Standard Test Method for Electrochemical Critical Pitting Temperature Testing of Stainless Steels |
| ASTM G 71 : 1981 : R2003 | Standard Guide for Conducting and Evaluating Galvanic Corrosion Tests in Electrolytes |
| IEEE 1895:2014 | BELOW-GRADE INSPECTION AND ASSESSMENT OF CORROSION ON STEEL TRANSMISSION, DISTRIBUTION, AND SUBSTATION STRUCTURES |
| ASTM G 111 : 1997 : R2006 | Standard Guide for Corrosion Tests in High Temperature or High Pressure Environment, or Both |
| ASTM D 6208 : 2007 | Standard Test Method for Repassivation Potential of Aluminum and Its Alloys by Galvanostatic Measurement |
| ASTM G 162 : 1999 : R2010 | Standard Practice for Conducting and Evaluating Laboratory Corrosions Tests in Soils |
| ASTM G 71 : 1981 : R1998 : EDT 1 | Standard Guide for Conducting and Evaluating Galvanic Corrosion Tests in Electrolytes |
| ASTM G 52 : 2000 : R2011 | Standard Practice for Exposing and Evaluating Metals and Alloys in Surface Seawater |
| I.S. EN ISO 16784-2:2008 | CORROSION OF METALS AND ALLOYS - CORROSION AND FOULING IN INDUSTRIAL COOLING WATER SYSTEMS - PART 2: EVALUATION OF THE PERFORMANCE OF COOLING WATER TREATMENT PROGRAMMES USING A PILOT-SCALE TEST RIG |
| ASTM G 111 : 1997 : R2013 | Standard Guide for Corrosion Tests in High Temperature or High Pressure Environment, or Both |
| NACE RP 04 97 : 2004 | FIELD CORROSION EVALUATION USING METALLIC TEST SPECIMENS |
| ASTM C 1187 : 2015 : REDLINE | Standard Guide for Establishing Surveillance Test Program for Boron-Based Neutron Absorbing Material Systems for Use in Nuclear Fuel Storage Racks In a Pool Environment |
| ASTM F 2111 : 2001 : REV A : R2005 : EDT 1 | Standard Practice for Measuring Intergranular Attack or End Grain Pitting on Metals Caused by Aircraft Chemical Processes |
| ASTM G 189:2007 | Standard Guide for Laboratory Simulation of Corrosion Under Insulation |
| ASTM G 48 : 2011 : R2015 | Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution |
| ASTM G 33 : 1999 : R2020 | Standard Practice for Recording Data from Atmospheric Corrosion Tests of Metallic-Coated Steel Specimens |
| ASTM C 1617 : 2019 | Standard Practice for Quantitative Accelerated Laboratory Evaluation of Extraction Solutions Containing Ions Leached from Thermal Insulation on Aqueous Corrosion of Metals |
| ASTM G 170 : 2006 : R2020 : EDT 1 | Standard Guide for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors in the Laboratory |
| ASTM D 6208 : 2007 : R2020 | Standard Test Method for Repassivation Potential of Aluminum and Its Alloys by Galvanostatic Measurement |
| ASTM G 71 : 1981 : R2019 | Standard Guide for Conducting and Evaluating Galvanic Corrosion Tests in Electrolytes |
| ASTM G 16 : 2013 : R2019 | Standard Guide for Applying Statistics to Analysis of Corrosion Data |
| ASTM F 3268 : 2018 : REV A | Standard Guide for <emph type="bdit">in vitro</emph> Degradation Testing of Absorbable Metals |
| ASTM G 202 : 2012 : R2020 | Standard Test Method for Using Atmospheric Pressure Rotating Cage |
| ASTM G 52 : 2020 | Standard Practice for Exposing and Evaluating Metals and Alloys in Surface Seawater |
| ASTM C 1187 : 2020 : REV A | Standard Guide for Establishing Surveillance Test Program for Boron-based Neutron Absorbing Material Systems for Use in Nuclear Fuel Storage Racks in Pool Environment |
| ASTM G 189 : 2007 : R2021 : EDT 1 | Standard Guide for Laboratory Simulation of Corrosion Under Insulation |
| ASTM G 78 : 2020 | Standard Guide for Crevice Corrosion Testing of Iron-Base and Nickel-Base Stainless Alloys in Seawater and Other Chloride-Containing Aqueous Environments |
| ASTM F 1110 : 2009 : R2020 | Standard Test Method for Sandwich Corrosion Test |
| ASTM G 107 : 1995 : R2020 : EDT 1 | Standard Guide for Formats for Collection and Compilation of Corrosion Data for Metals for Computerized Database Input |
| ASTM G 50 : 2020 | Standard Practice for Conducting Atmospheric Corrosion Tests on Metals |
| ASTM F 3044 : 2020 | Standard Test Method for Evaluating the Potential for Galvanic Corrosion for Medical Implants |
| ASTM G 162 : 2018 | Standard Practice for Conducting and Evaluating Laboratory Corrosion Tests in Soils |
| ASTM G 31 : 2021 | Standard Guide for Laboratory Immersion Corrosion Testing of Metals |
| ASTM G 208 : 2012 : R2020 | Standard Practice for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors Using Jet Impingement Apparatus |
| ASTM G 199 : 2009 : R2020 : EDT 1 | Standard Guide for Electrochemical Noise Measurement |
| ASTM G 184 : 2006 : R2020 : EDT 1 | Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using Rotating Cage |
| ASTM G 48 : 2011 : R2020 : EDT 1 | Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution |
| ASTM G 185 : 2006 : R2020 : EDT 1 | Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using the Rotating Cylinder Electrode |
| ASTM G 161 : 2000 : R2018 | Standard Guide for Corrosion-Related Failure Analysis |
| ASTM G 189 : 2007 : R2013 | Standard Guide for Laboratory Simulation of Corrosion Under Insulation |
| ASTM G 1 : 2003 : R2011 | Standard Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens |
| NACE TM 01 69 : 2012 | Standard Guide for Laboratory Immersion Corrosion Testing of Metals |
| NACE RP 07 75 : 2005 | PREPARATION, INSTALLATION, ANALYSIS, AND INTERPRETATION OF CORROSION COUPONS IN OILFIELD OPERATIONS |
| ASTM G 48 : 2011 | : Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution |
| ASTM G 199 : 2009 : R2014 | Standard Guide for Electrochemical Noise Measurement |
| ASTM G 161 : 2000 : R2013 | Standard Guide for Corrosion-Related Failure Analysis |
| ASTM G 31 : 2012 | GUIDE FOR LABORATORY IMMERSION CORROSION TESTING OF METALS |
| ASTM G 157 : 1998 | Standard Guide for Evaluating the Corrosion Properties of Wrought Iron- and Nickel-Based Corrosion Resistant Alloys for the Chemical Process Industries |
| ASTM G 87 : 2002 : R2013 | Standard Practice for Conducting Moist SO<inf>2</inf> Tests |
| SAE J2800_200706 | Laboratory Corrosion/Fatigue Testing of Vehicle Suspension Coil Springs |
| ASTM G 157 : 1998 : R2005 | Standard Guide for Evaluating the Corrosion Properties of Wrought Iron- and Nickel-Based Corrosion Resistant Alloys for the Chemical Process Industries |
| ASTM G 161 : 2000 | Standard Guide for Corrosion-Related Failure Analysis |
| ASTM G 217 : 2016 | Standard Guide for Corrosion Monitoring in Laboratories and Plants with Coupled Multielectrode Array Sensor Method |
| ASTM G 170 :2006 | Standard Guide for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors in the Laboratory |
| ASTM G 208 : 2012 : R2016 | Standard Practice for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors Using Jet Impingement Apparatus |
| ASTM F 1110 : 2009 : R2014 | Standard Test Method for Sandwich Corrosion Test |
| NASA MSFC SPEC 1870 : 2005 | GUIDELINES FOR EVALUATION OF CORROSION INHIBITING PRESERVATIVES |
| UNI EN ISO 16784-2 : 2008 | CORROSION OF METALS AND ALLOYS - CORROSION AND FOULING IN INDUSTRIAL COOLING WATER SYSTEMS - PART 2: EVALUATION OF THE PERFORMANCE OF COOLING WATER TREATMENT PROGRAMMES USING A PILOT-SCALE TEST RIG |
| ASTM G 109 : 2007 : R2013 | Standard Test Method for Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments |
| SAE CRP-4 : 1992 | RECOMMENDED METHODS FOR CONDUCTING CORROSION TESTS IN GASOLINE/METHANOL FUEL MIXTURES |
| ASTM F 2111 : 2001 | Standard Practice for Measuring Intergranular Attack or End Grain Pitting on Metals Caused by Aircraft Chemical Processes |
| ASTM G 185 : 2006 : R2016 | Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using the Rotating Cylinder Electrode |
| ASTM G 33 : 1999 : R2004 | Standard Practice for Recording Data from Atmospheric Corrosion Tests of Metallic-Coated Steel Specimens |
| ASTM G 78 : 2015 : REDLINE | Standard Guide for Crevice Corrosion Testing of Iron-Base and Nickel-Base Stainless Alloys in Seawater and Other Chloride-Containing Aqueous Environments |
| ASTM G 208 : 2012 | Standard Practice for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors Using Jet Impingement Apparatus |
| NACE TM 04 99 : 2009 | IMMERSION CORROSION TESTING OF CERAMIC MATERIALS |
| ASTM G 170 : 2006 : R2012 | Standard Guide for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors in the Laboratory |
| ASTM G 111 : 1997 | Standard Guide for Corrosion Tests in High Temperature or High Pressure Environment, or Both |
| ASTM G 71 : 1981 : R2009 | Standard Guide for Conducting and Evaluating Galvanic Corrosion Tests in Electrolytes |
| ASTM G 87 : 2002 : R2018 | Standard Practice for Conducting Moist SO<inf>2</inf> Tests |
| NACE 24238 : 2009 | MONITORING AND ADJUSTMENT OF COOLING WATER TREATMENT OPERATING PARAMETERS |
| NACE RP 06 90 : 2004 | STANDARD FORMAT FOR COLLECTION AND COMPILATION OF DATA FOR COMPUTERIZED MATERIAL CORROSION RESISTANCE DATABASE INPUT |
| API 579-1 : 2016 | FITNESS-FOR-SERVICE |
| ASTM G 1 : 2003 : R2017 : EDT 1 | Standard Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens |
| ASTM G 157 : 1998 : R2013 | Standard Guide for Evaluating Corrosion Properties of Wrought Iron- and Nickel-Based Corrosion Resistant Alloys for Chemical Process Industries |
| API STD 17F : 2017 | SUBSEA PRODUCTION CONTROL SYSTEMS |
| ASTM G 109 : 2007 | Standard Test Method for Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments |
| NACE 31014 : 0 | FIELD MONITORING OF CORROSION RATES IN OIL AND GAS PRODUCTION ENVIRONMENTS USING ELECTROCHEMICAL TECHNIQUES |
| ISO 16784-2:2006 | Corrosion of metals and alloys — Corrosion and fouling in industrial cooling water systems — Part 2: Evaluation of the performance of cooling water treatment programmes using a pilot-scale test rig |
| EN ISO 16784-2:2008 | Corrosion of metals and alloys - Corrosion and fouling in industrial cooling water systems - Part 2: Evaluation of the performance of cooling water treatment programmes using a pilot-scale test rig (ISO 16784-2:2006) |
| ASTM G 162 : 1999 : R2004 | Standard Practice for Conducting and Evaluating Laboratory Corrosions Tests in Soils |
| ASTM G 33 : 1999 : R2015 | Standard Practice for Recording Data from Atmospheric Corrosion Tests of Metallic-Coated Steel Specimens |
| ASTM G 87 : 2002 : R2007 | Standard Practice for Conducting Moist SO<sub>2</sub> Tests |
| ASTM G 52 : 2000 : R2006 | Standard Practice for Exposing and Evaluating Metals and Alloys in Surface Seawater |
| DIN EN ISO 16784-2:2008-07 | Corrosion of metals and alloys - Corrosion and fouling in industrial cooling water systems - Part 2: Evaluation of the performance of cooling water treatment programmes using a pilot-scale test rig (ISO 16784-2:2006) |
| NACE SP 06 90 : 2009 | STANDARD FORMAT FOR COLLECTION AND COMPILATION OF DATA FOR COMPUTERIZED MATERIAL CORROSION RESISTANCE DATABASE INPUT |
| NACE SP 04 15 : 2015 | BELOW-GRADE INSPECTION AND ASSESSMENT OF CORROSION ON STEEL TRANSMISSION, DISTRIBUTION, AND SUBSTATION STRUCTURES |
| ASTM G 4 : 2001 | Standard Guide for Conducting Corrosion Tests in Field Applications |
| ASTM G 1 : 2003 | Standard Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens |
| ASTM F 2111 : 2001 : REV A : R2011 | Standard Practice for Measuring Intergranular Attack or End Grain Pitting on Metals Caused by Aircraft Chemical Processes |
| ASTM G 4 : 2001 : R2008 | Standard Guide for Conducting Corrosion Tests in Field Applications |
| ASTM G 161 : 2000 : R2006 | Standard Guide for Corrosion-Related Failure Analysis |
| ASTM G 111 : 1997 : R2018 | Standard Guide for Corrosion Tests in High Temperature or High Pressure Environment, or Both |
| API TR 17TR8 : 2018 | HIGH-PRESSURE HIGH-TEMPERATURE DESIGN GUIDELINES |
| ASTM F 3268 : 2018 | Standard Guide for <emph type="bdit">in vitro</emph> Degradation Testing of Absorbable Metals |
| ASTM G 4 : 2001 : R2014 | Standard Guide for Conducting Corrosion Tests in Field Applications (Withdrawn 2023) |
| ASTM G 107 : 1995 : R2015 | Standard Guide for Formats for Collection and Compilation of Corrosion Data for Metals for Computerized Database Input |
| ASTM G 185 :2006 | Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using the Rotating Cylinder Electrode |
| ASTM G 107 :1995 | Standard Guide for Formats for Collection and Compilation of Corrosion Data for Metals for Computerized Database Input |
| ASTM G 50 : 2010 : R2015 | Standard Practice for Conducting Atmospheric Corrosion Tests on Metals |
| ASTM F 3044 : 2014 | Test Method for Standard Test Method for Evaluating the Potential for Galvanic Corrosion for Medical Implants |
| NACE RP0173:1973 | COLLECTION AND IDENTIFICATION OF CORROSION PRODUCTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.