ASTM G 59 : 1997
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements
Available format(s)
Hardcopy , PDF
Superseded date
11-11-2014
Superseded by
Language(s)
English
Published date
31-12-2010
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 03.02, 2015 Gives an experimental procedure for polarization resistance measurements which can be used for the calibration of equipment and verification of experimental technique.
| Committee |
G 01
|
| DocumentType |
Test Method
|
| Pages |
3
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
1.1 This test method describes an experimental procedure for polarization resistance measurements which can be used for the calibration of equipment and verification of experimental technique. The test method can provide reproducible corrosion potentials and potentiodynamic polarization resistance measurements.
1.2 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| UNI/TS 11479 : 2013 | NON-DESTRUCTIVE TESTING - TECHNIQUES OF INVESTIGATION ON THE STATE OF CONSERVATION OF STEEL LIGHTING COLUMNS |
| ASTM G 102 : 1989 : R2004 : EDT 1 | Standard Practice for Calculation of Corrosion Rates and Related Information from Electrochemical Measurements |
| I.S. EN 62561-7:2012 | LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 7: REQUIREMENTS FOR EARTHING ENHANCING COMPOUNDS (IEC 62561-7:2011 (MOD)) |
| NACE RP 05 02 : 2002 | PIPELINE EXTERNAL CORROSION DIRECT ASSESSMENT METHODOLOGY |
| ASTM G 96 : 1990 : R1996 : EDT 1 | Standard Guide for On-Line Monitoring of Corrosion in Plant Equipment (Electrical and Electrochemical Methods) |
| MIL-PRF-32577 Base Document:2017 | Coating System, Nonskid, Metallic Thermal Spray Application |
| ASTM G 185 : 2006 : R2012 | Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using the Rotating Cylinder Electrode |
| UNE-EN 62561-7:2012 | Lightning Protection System Components (LPSC) - Part 7: Requirements for earthing enhancing compounds |
| ASTM G 127 : 2015 : REDLINE | Standard Guide for the Selection of Cleaning Agents for Oxygen-Enriched Systems |
| ASTM G 102 : 1989 : R2010 | Standard Practice for Calculation of Corrosion Rates and Related Information from Electrochemical Measurements |
| ASTM G 199:2009 | Standard Guide for Electrochemical Noise Measurement |
| NACE SP 05 02 : 2010 | PIPELINE EXTERNAL CORROSION DIRECT ASSESSMENT METHODOLOGY |
| BS EN 62561-7:2012 | Lightning Protection System Components (LPSC) Requirements for earthing enhancing compounds |
| ASTM G 106 : 1989 : R2015 | Standard Practice for Verification of Algorithm and Equipment for Electrochemical Impedance Measurements |
| ASTM G 111 : 1997 : R2006 | Standard Guide for Corrosion Tests in High Temperature or High Pressure Environment, or Both |
| ASTM D 2776 : 1979 : EDT 1 | Standard Test Methods for Corrosivity of Water in the Absence of Heat Transfer (Electrical Methods) |
| ASTM G 100 : 1989 : R1999 | Standard Test Method for Conducting Cyclic Galvanostaircase Polarization |
| ASTM G 111 : 1997 : R2013 | Standard Guide for Corrosion Tests in High Temperature or High Pressure Environment, or Both |
| ASTM G 189:2007 | Standard Guide for Laboratory Simulation of Corrosion Under Insulation |
| ASTM G 215 : 2017 : REDLINE | Standard Guide for Electrode Potential Measurement |
| ASTM G 96 : 1990 : R2018 | Standard Guide for Online Monitoring of Corrosion in Plant Equipment (Electrical and Electrochemical Methods) |
| ASTM G 215 : 2017 | Standard Guide for Electrode Potential Measurement |
| ASTM B 733 : 2015 | Standard Specification for Autocatalytic (Electroless) Nickel-Phosphorus Coatings on Metal |
| ASTM G 170 : 2006 : R2020 : EDT 1 | Standard Guide for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors in the Laboratory |
| ASTM G 180 : 2013 : R2019 | Standard Test Method for Corrosion Inhibiting Admixtures for Steel in Concrete by Polarization Resistance in Cementitious Slurries |
| ASTM F 3268 : 2018 : REV A | Standard Guide for <emph type="bdit">in vitro</emph> Degradation Testing of Absorbable Metals |
| ASTM G 208 : 2012 : R2020 | Standard Practice for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors Using Jet Impingement Apparatus |
| ASTM G 189 : 2007 : R2021 : EDT 1 | Standard Guide for Laboratory Simulation of Corrosion Under Insulation |
| ASTM G 199 : 2009 : R2020 : EDT 1 | Standard Guide for Electrochemical Noise Measurement |
| ASTM G 127 : 2015 | Standard Guide for the Selection of Cleaning Agents for Oxygen-Enriched Systems |
| ASTM G 185 : 2006 : R2020 : EDT 1 | Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using the Rotating Cylinder Electrode |
| ASTM F 3044 : 2020 | Standard Test Method for Evaluating the Potential for Galvanic Corrosion for Medical Implants |
| UNE 112072:2011 | Laboratory measurement of corrosion speed using the polarization resistance technique. |
| ASTM G 189 : 2007 : R2013 | Standard Guide for Laboratory Simulation of Corrosion Under Insulation |
| ASTM G 100 : 1989 : R2004 | Standard Test Method for Conducting Cyclic Galvanostaircase Polarization |
| ASTM G 199 : 2009 : R2014 | Standard Guide for Electrochemical Noise Measurement |
| ASTM G 100 : 1989 : R2010 : EDT 1 | Standard Test Method for Conducting Cyclic Galvanostaircase Polarization |
| 15/30326969 DC : 0 | BS EN 62561-7 ED. 2 - LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 7: REQUIREMENTS FOR EARTHING ENHANCING COMPOUNDS |
| ASTM B 733 : 2015 : REDLINE | Standard Specification for Autocatalytic (Electroless) Nickel-Phosphorus Coatings on Metal |
| ASTM G 96 : 1990 : R2001 : EDT 1 | Standard Guide for On-Line Monitoring of Corrosion in Plant Equipment (Electrical and Electrochemical Methods) |
| ASTM G 106 : 1989 : R1999 | Standard Practice for Verification of Algorithm and Equipment for Electrochemical Impedance Measurements |
| ASTM G 102 : 1989 : R2015 : EDT 1 | Standard Practice for Calculation of Corrosion Rates and Related Information from Electrochemical Measurements |
| ASTM G 96 : 1990 : R2013 | Standard Guide for Online Monitoring of Corrosion in Plant Equipment (Electrical and Electrochemical Methods) |
| ASTM G 170 :2006 | Standard Guide for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors in the Laboratory |
| ASTM G 208 : 2012 : R2016 | Standard Practice for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors Using Jet Impingement Apparatus |
| ASTM G 119 : 2009 | Standard Guide for Determining Synergism Between Wear and Corrosion |
| ASTM G 185 : 2006 : R2016 | Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using the Rotating Cylinder Electrode |
| ASTM G 208 : 2012 | Standard Practice for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors Using Jet Impingement Apparatus |
| NACE TM 04 99 : 2009 | IMMERSION CORROSION TESTING OF CERAMIC MATERIALS |
| ASTM G 170 : 2006 : R2012 | Standard Guide for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors in the Laboratory |
| ASTM G 111 : 1997 | Standard Guide for Corrosion Tests in High Temperature or High Pressure Environment, or Both |
| ASTM G 119 : 2009 : R2016 | Standard Guide for Determining Synergism Between Wear and Corrosion |
| ASTM G 102 : 1989 : R1999 | Standard Practice for Calculation of Corrosion Rates and Related Information from Electrochemical Measurements |
| ASTM G 96 : 1990 : R2008 | Standard Guide for Online Monitoring of Corrosion in Plant Equipment (Electrical and Electrochemical Methods) |
| NACE 31014 : 0 | FIELD MONITORING OF CORROSION RATES IN OIL AND GAS PRODUCTION ENVIRONMENTS USING ELECTROCHEMICAL TECHNIQUES |
| ASTM G 106 : 1989 : R2010 | Standard Practice for Verification of Algorithm and Equipment for Electrochemical Impedance Measurements |
| CEI EN 62561-7 : 2012 | LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 7: REQUIREMENTS FOR EARTHING ENHANCING COMPOUNDS |
| EN IEC 62561-7:2018 | Lightning protection system components (LPSC) - Part 7: Requirements for earthing enhancing compounds |
| ASTM G 111 : 1997 : R2018 | Standard Guide for Corrosion Tests in High Temperature or High Pressure Environment, or Both |
| AASHTO T 373M/T 373 : 2017 | METHOD OF TEST FOR COMPARATIVE QUALITATIVE CORROSION CHARACTERIZATION OF STEEL BARS USED FOR CONCRETE REINFORCEMENT (LINEAR POLARIZATION RESISTANCE AND POTENTIODYNAMIC POLARIZATION TESTS) |
| I.S. EN IEC 62561-7:2018 | LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 7: REQUIREMENTS FOR EARTHING ENHANCING COMPOUNDS |
| ASTM G 100 : 1989 : R2015 | Standard Test Method for Conducting Cyclic Galvanostaircase Polarization |
| ASTM F 3268 : 2018 | Standard Guide for <emph type="bdit">in vitro</emph> Degradation Testing of Absorbable Metals |
| ASTM B 994/B994M : 2015 | Standard Specification for Nickel-Cobalt Alloy Coating |
| NACE 21413 : 2017 | PREDICTION OF INTERNAL CORROSION IN OILFIELD SYSTEMS FROM SYSTEM CONDITIONS |
| ASTM G 185 :2006 | Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using the Rotating Cylinder Electrode |
| ASTM G 106 : 1989 : R2004 | Standard Practice for Verification of Algorithm and Equipment for Electrochemical Impedance Measurements |
| ASTM F 3044 : 2014 | Test Method for Standard Test Method for Evaluating the Potential for Galvanic Corrosion for Medical Implants |
| ASTM G 180 : 2013 : REDLINE | TEST METHOD FOR CORROSION INHIBITING ADMIXTURES FOR STEEL IN CONCRETE BY POLARIZATION RESISTANCE IN CEMENTITIOUS SLURRIES |
| IEC 62561-7:2018 | Lightning protection system components (LPSC) - Part 7: Requirements for earthing enhancing compounds |
| EN 62561-7:2012 | Lightning Protection System Components (LPSC) - Part 7: Requirements for earthing enhancing compounds |
| ASTM G 3 : 2014 | Standard Practice for Conventions Applicable to Electrochemical Measurements in Corrosion Testing |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.