ASTM G 78 : 2015 : REDLINE
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Guide for Crevice Corrosion Testing of Iron-Base and Nickel-Base Stainless Alloys in Seawater and Other Chloride-Containing Aqueous Environments
28-11-2020
English
01-06-2015
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 03.02, 2017 Specifies information for conducting crevice-corrosion tests and identifies factors that may affect results and influence conclusions.
| Committee |
G 01
|
| DocumentType |
Redline
|
| Pages |
8
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
1.1This guide covers information for conducting crevice-corrosion tests and identifies factors that may affect results and influence conclusions.
1.2These procedures can be used to identify conditions most likely to result in crevice corrosion and provide a basis for assessing the relative resistance of various alloys to crevice corrosion under certain specified conditions.
1.3The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For a specific warning statement, see 7.1.
| ASTM G 107 : 1995 : R2008 | Standard Guide for Formats for Collection and Compilation of Corrosion Data for Metals for Computerized Database Input |
| ASTM G 52 : 2000 | Standard Practice for Exposing and Evaluating Metals and Alloys in Surface Seawater |
| ASTM G 192 :2008 | Standard Test Method for Determining the Crevice Repassivation Potential of Corrosion-Resistant Alloys Using a Potentiodynamic-Galvanostatic-Potentiostatic Technique |
| ASTM G 107 : 1995 : R2002 | Standard Guide for Formats for Collection and Compilation of Corrosion Data for Metals for Computerized Database Input |
| ASTM G 107 :1995 | Standard Guide for Formats for Collection and Compilation of Corrosion Data for Metals for Computerized Database Input |
| ASTM G 52 : 2000 : R2016 : EDT 1 | Standard Practice for Exposing and Evaluating Metals and Alloys in Surface Seawater |
| ASTM G 111 : 1997 : R2006 | Standard Guide for Corrosion Tests in High Temperature or High Pressure Environment, or Both |
| ASTM G 52 : 2000 : R2011 | Standard Practice for Exposing and Evaluating Metals and Alloys in Surface Seawater |
| API TR 17TR8 : 2018 | HIGH-PRESSURE HIGH-TEMPERATURE DESIGN GUIDELINES |
| ASTM G 111 : 1997 : R2013 | Standard Guide for Corrosion Tests in High Temperature or High Pressure Environment, or Both |
| NACE RP 04 97 : 2004 | FIELD CORROSION EVALUATION USING METALLIC TEST SPECIMENS |
| ASTM G 4 : 2001 : R2008 | Standard Guide for Conducting Corrosion Tests in Field Applications |
| ASTM G 31 : 2012 | GUIDE FOR LABORATORY IMMERSION CORROSION TESTING OF METALS |
| NACE TM 01 69 : 2012 | Standard Guide for Laboratory Immersion Corrosion Testing of Metals |
| ASTM G 111 : 1997 : R2018 | Standard Guide for Corrosion Tests in High Temperature or High Pressure Environment, or Both |
| ASTM G 192 : 2008 : R2014 | Standard Test Method for Determining the Crevice Repassivation Potential of Corrosion-Resistant Alloys Using a Potentiodynamic-Galvanostatic-Potentiostatic Technique |
| ASTM G 111 : 1997 | Standard Guide for Corrosion Tests in High Temperature or High Pressure Environment, or Both |
| NACE RP 06 90 : 2004 | STANDARD FORMAT FOR COLLECTION AND COMPILATION OF DATA FOR COMPUTERIZED MATERIAL CORROSION RESISTANCE DATABASE INPUT |
| ASTM G 52 : 2000 : R2006 | Standard Practice for Exposing and Evaluating Metals and Alloys in Surface Seawater |
| NACE SP 06 90 : 2009 | STANDARD FORMAT FOR COLLECTION AND COMPILATION OF DATA FOR COMPUTERIZED MATERIAL CORROSION RESISTANCE DATABASE INPUT |
| ASTM G 4 : 2001 | Standard Guide for Conducting Corrosion Tests in Field Applications |
| ASTM G 1 : 2003 | Standard Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens |
| ASTM G 31 : 2012 : REV A | GUIDE FOR LABORATORY IMMERSION CORROSION TESTING OF METALS |
| 03/314809 DC : DRAFT SEP 2003 | EN ISO 13680 - PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS |
| ASTM G 4 : 2001 : R2014 | Standard Guide for Conducting Corrosion Tests in Field Applications (Withdrawn 2023) |
| ASTM G 107 : 1995 : R2015 | Standard Guide for Formats for Collection and Compilation of Corrosion Data for Metals for Computerized Database Input |
| ASTM G 1 : 2003 : R2017 : EDT 1 | Standard Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens |
| ASTM G 1 : 2003 : R2011 | Standard Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens |
| ASTM G 46 : 1994 : R2018 | Standard Guide for Examination and Evaluation of Pitting Corrosion |
| ASTM G 4 : 2001 | Standard Guide for Conducting Corrosion Tests in Field Applications |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.