AWWA C111/A21.11 : 2017
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
RUBBER-GASKET JOINTS FOR DUCTILE-IRON PRESSURE PIPE AND FITTINGS
Hardcopy , PDF
English
01-04-2017
04-08-2023
Foreword
I Introduction
II Special Issues
III Use of This Standard
IV Major Revisions
V Comments
Standard
1 General
2 References
3 Definitions
4 Requirements
5 Verification
6 Delivery
Appendixes
A - Mechanical-Joint Bolts, Gaskets,
and Installation
B - Push-on Joint Design, Gaskets,
Lubricant, and Installation
C - Flanged-Joint Bolts, Gaskets,
and Installation
D - Effects of Chloramines on Ductile-Iron Pipe
Gaskets and Elastomers
Specifies rubber-gasket joints of the following types for ductile-iron pressure pipe and ductile-iron and gray-iron fittings, valves, hydrants, and other appurtenances for potable water, wastewater, and reclaimed water supply service.
| DevelopmentNote |
Supersedes WW P 401 (07/2004)
|
| DocumentType |
Standard
|
| ISBN |
978-1-58321-210-8
|
| Pages |
56
|
| PublisherName |
American Water Works Association
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| ANSI A21.52 : 1991 | DUCTILE IRON PIPE, CENTRIFUGALLY CAST, GAS |
| AWWA C502 : 2014 | DRY-BARREL FIRE HYDRANTS |
| FM 1610 : 2016 | DUCTILE IRON PIPE AND FITTINGS, FLEXIBLE FITTINGS AND COUPLINGS |
| ASTM A 377 : 2003 : R2014 | Standard Index of Specifications for Ductile-Iron Pressure Pipe |
| ANSI/AWWA C115/A21.15 : 2011 | FLANGED DUCTILE-IRON PIPE WITH DUCTILE-IRON OR GRAY-IRON THREADED FLANGES |
| AWWA M44 : 2016 | DISTRIBUTION VALVES: SELECTION, INSTALLATION, FIELD TESTING, AND MAINTENANCE |
| ASTM A 377 : 2003 | Standard Index of Specifications for Ductile-Iron Pressure Pipe |
| AWWA C503 : 2014 | WET-BARREL FIRE HYDRANTS |
| AWWA C223 : 2013 | FABRICATED STEEL AND STAINLESS STEEL-TAPPING SLEEVES |
| MSS SP 128 : 2012 | DUCTILE IRON GATE VALVES |
| MSS SP 124 : 2016 | FABRICATED TAPPING SLEEVES |
| ASTM A 377 : 2003 : R2008 : EDT 1 | Standard Index of Specifications for Ductile-Iron Pressure Pipe |
| AWWA C500 : 2009 | METAL-SEATED GATE VALVES FOR WATER SUPPLY SERVICE |
| ASTM A 746 : 2009 : R2014 | Standard Specification for Ductile Iron Gravity Sewer Pipe |
| FM 1615 : 2009 | CAST IRON PIPE, FITTINGS AND COUPLINGS |
| AWWA C515 : 2015 | REDUCED-WALL, RESILIENT-SEATED GATE VALVES FOR WATER SUPPLY SERVICE |
| AWWA C504 : 2015 | RUBBER-SEATED BUTTERFLY VALVES |
| ASTM C 966 : 1998 | Standard Guide for Installing Asbestos-Cement Nonpressure Pipe |
| ASME B31.1 : 2016 | POWER PIPING |
| ASME B31.8 : 2016 | Gas Transmission and Distribution Piping Systems |
| ASME B31.3:2016 | PROCESS PIPING |
| AWWA C110/A21.10 : 2012 | DUCTILE-IRON AND GRAY-IRON FITTINGS |
| ASTM C 966 : 1998 : R2003 : EDT 1 | Standard Guide for Installing Asbestos-Cement Nonpressure Pipe |
| MSS SP 60 : 2017 | CONNECTING FLANGE JOINT BETWEEN TAPPING SLEEVES AND TAPPING VALVES |
| ASTM C 966 : 1998 : R2003 | Standard Guide for Installing Asbestos-Cement Nonpressure Pipe |
| MSS SP 136 : 2014 | DUCTILE IRON SWING CHECK VALVES |
| ASTM C 966 : 1998 : R2008 | Standard Guide for Installing Asbestos-Cement Nonpressure Pipe |
| ASTM C 966 : 1998 : R2014 | Standard Guide for Installing Asbestos-Cement Nonpressure Pipe (Withdrawn 2019) |
| ICC IPC CODE & COMMENTARY : 2015 | IPC® Code and Commentary |
| ICC 2012 INTERNATIONAL PLUMBING CODE : 2012 | INTERNATIONAL PLUMBING CODE (INCLUDES IPSDC) |
| AWWA C605 : 2013 | UNDERGROUND INSTALLATION OF POLYVINYL CHLORIDE (PVC) AND MOLECULARLY ORIENTED POLYVINYL CHLORIDE (PVCO) PRESSURE PIPE AND FITTINGS |
| AWWA M41 : 3 | Ductile-Iron Pipe and Fittings, Third Edition |
| AWWA C151/A21.51 : 2017 | DUCTILE-IRON PIPE, CENTRIFUGALLY CAST |
| AWWA C509 : 2015 | RESILIENT-SEATED GATE VALVES FOR WATER SUPPLY SERVICE |
| AWWA C517 : 2016 | RESILIENT-SEATED CAST-IRON ECCENTRIC PLUG VALVES |
| MSS SP 116 : 2014 | SERVICE-LINE VALVES AND FITTINGS FOR DRINKING WATER SYSTEMS |
| ASTM A 746 : 2009 | Standard Specification for Ductile Iron Gravity Sewer Pipe |
| AWWA M28 : 2014 | REHABILITATION OF WATER MAINS |
| MSS SP 113 : 2017 | CONNECTING JOINTS BETWEEN TAPPING MACHINES AND TAPPING VALVES |
| AWWA C153/A21.53 : 2011 | DUCTILE-IRON COMPACT FITTINGS |
| ASME B31.5 : 2016 | REFRIGERATION PIPING AND HEAT TRANSFER COMPONENTS |
| AGA Z22302 : 2002 ADDENDA A 03 | NATIONAL FUEL GAS CODE |
| ASME B31.3 SPANISH : 2010 | PROCESS PIPING |
| ASME B18.2.1 : 2012 | SQUARE, HEX, HEAVY HEX, AND ASKEW HEAD BOLTS AND HEX, HEAVY HEX, HEX FLANGE, LOBED HEAD, AND LAG SCREWS (INCH SERIES) |
| AWWA C153/A21.53 : 2011 | DUCTILE-IRON COMPACT FITTINGS |
| NSF 61 : 2016 | DRINKING WATER SYSTEM COMPONENTS - HEALTH EFFECTS |
| AWWA C207 : 2013 | STEEL PIPE FLANGES FOR WATERWORKS SERVICE, SIZES 4 IN. THROUGH 144 IN. (100 MM THROUGH 3,600 MM) |
| ANSI/AWWA C115/A21.15 : 2011 | FLANGED DUCTILE-IRON PIPE WITH DUCTILE-IRON OR GRAY-IRON THREADED FLANGES |
| ASTM D 1149 : 2016-02 | TEST METHODS FOR RUBBER DETERIORATION - CRACKING IN AN OZONE CONTROLLED ENVIRONMENT |
| AWWA C151/A21.51 : 2017 | DUCTILE-IRON PIPE, CENTRIFUGALLY CAST |
| AWWA C600 : 2010 | INSTALLATION OF DUCTILE-IRON MAINS AND THEIR APPURTENANCES |
| ASME B16.1 : 2015 | Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250 |
| AWWA C110/A21.10 : 2012 | DUCTILE-IRON AND GRAY-IRON FITTINGS |
| ASME B16.5 : 2017 | PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD |
| ASME B18.2.2 : 2015 | NUTS FOR GENERAL APPLICATIONS: MACHINE SCREW NUTS, HEX, SQUARE, HEX FLANGE, AND COUPLING NUTS (INCH SERIES) |
| AWWA C651 : 2014 | DISINFECTING WATER MAINS |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.