• There are no items in your cart

AWWA C151/A21.51 : 2017

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

DUCTILE-IRON PIPE, CENTRIFUGALLY CAST

Available format(s)

Hardcopy , PDF

Superseded date

17-05-2024

Superseded by

AWWA C151/A21.51:2023

Language(s)

English

Published date

01-06-2017

€127.42
Excluding VAT

Foreword
I Introduction
II Special Issues
III Use of This Standard
IV Major Revisions
V Comments
Standard
1 General
2 References
3 Definitions
4 Requirements
5 Verification
6 Delivery
Appendix
A - Pipe Thickness Required for Different Tap Sizes

Specifies 3-in. through 64-in. (80-mm through 1,600-mm) ductile-iron pipe, centrifugally cast, for potable water, raw water, wastewater, and reclaimed water systems with push-on joints or mechanical joints.

DevelopmentNote
Supersedes WW P 401 (07/2004)
DocumentType
Standard
ISBN
9781625762191
Pages
60
PublisherName
American Water Works Association
Status
Superseded
SupersededBy
Supersedes

AWWA C502 : 2014 DRY-BARREL FIRE HYDRANTS
FM 1610 : 2016 DUCTILE IRON PIPE AND FITTINGS, FLEXIBLE FITTINGS AND COUPLINGS
ASTM A 377 : 2003 Standard Index of Specifications for Ductile-Iron Pressure Pipe
AWWA C503 : 2014 WET-BARREL FIRE HYDRANTS
ASTM A 377 : 2003 : R2008 : EDT 1 Standard Index of Specifications for Ductile-Iron Pressure Pipe
ASTM F 1476 : 2007 Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications
ICC 2009 INT. RESI.CODE & COMM.-I1 : 2009 2009 INTERNATIONAL RESIDENTIAL CODE & COMMENTARY - VOLUME 2: CHAPTERS 12 TO 44
UNI CEN ISO/TS 24817 : 2011 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COMPOSITE REPAIRS FOR PIPEWORK - QUALIFICATION AND DESIGN, INSTALLATION, TESTING AND INSPECTION
AWWA C111/A21.11 : 2017 RUBBER-GASKET JOINTS FOR DUCTILE-IRON PRESSURE PIPE AND FITTINGS
ASCE/CI 36 15 : 2015 STANDARD DESIGN AND CONSTRUCTION GUIDELINES FOR MICROTUNNELING
ASTM F 1548 : 2001 Standard Specification for the Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications
ASTM A 716 : 2008 Standard Specification for Ductile Iron Culvert Pipe
ASTM F 1548 : 2001 : R2012 Standard Specification for Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications
ISO/TS 24817:2006 Petroleum, petrochemical and natural gas industries Composite repairs for pipework Qualification and design, installation, testing and inspection
ASME B31.1 : 2016 POWER PIPING
ASME PCC 2 : 2015 REPAIR OF PRESSURE EQUIPMENT AND PIPING
ASME B31.3:2016 PROCESS PIPING
AWWA C606 : 2015 GROOVED AND SHOULDERED JOINTS
ISO 24817:2017 Petroleum, petrochemical and natural gas industries — Composite repairs for pipework — Qualification and design, installation, testing and inspection
NFPA 14 : 2016 INSTALLATION OF STANDPIPE AND HOSE SYSTEMS
ASTM A 716 : 2008 : R2014 Standard Specification for Ductile Iron Culvert Pipe
BS EN ISO 24817:2017 Petroleum, petrochemical and natural gas industries. Composite repairs for pipework. Qualification and design, installation, testing and inspection
ASTM F 1548 : 2001 : R2006 Standard Specification for the Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications
API 2610:2005 DESIGN, CONSTRUCTION, OPERATION, MAINTENANCE, AND INSPECTION OF TERMINAL AND TANK FACILITIES
ICC IRC CODE AND COMMENTARY VOLUME 2 : 2015 IRC® Code and Commentary, Volume 2
ICC IMC Code and Commentary : 2015 IMC® Code and Commentary
ICC 2012 INTERNATIONAL RESI. CODE : 2012 INTERNATIONAL RESIDENTIAL CODE FOR ONE- AND TWO-FAMILY DWELLINGS
ICC 2012 INTERNATIONAL PLUMBING CODE : 2012 INTERNATIONAL PLUMBING CODE (INCLUDES IPSDC)
DD CEN ISO/TS 24817:2011 Petroleum, petrochemical and natural gas industries. Composite repairs for pipework. Qualification and design, installation, testing and inspection
ANSI/AWWA C115/A21.15 : 2011 FLANGED DUCTILE-IRON PIPE WITH DUCTILE-IRON OR GRAY-IRON THREADED FLANGES
AWWA M41 : 3 Ductile-Iron Pipe and Fittings, Third Edition
14/30256269 DC : 0 BS EN ISO 24817 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COMPOSITE REPAIRS FOR PIPEWORK - QUALIFICATION AND DESIGN, INSTALLATION, TESTING AND INSPECTION
DD ISO/TS 24817 : 2006 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COMPOSITE REPAIRS FOR PIPEWORK - QUALIFICATION AND DESIGN, INSTALLATION, TESTING AND INSPECTION
CSA B242 : 2005 GROOVE- AND SHOULDER-TYPE MECHANICAL PIPE COUPLINGS
ASTM F 1476 : 2007 : R2013 Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications
ASCE 36 01 : 2001 STANDARD CONSTRUCTION GUIDELINES FOR MICROTUNNELING
ASTM A 377 : 2003 : R2014 Standard Index of Specifications for Ductile-Iron Pressure Pipe
API 2610 : 2005 : R2010 DESIGN, CONSTRUCTION, OPERATION, MAINTENANCE, AND INSPECTION OF TERMINAL AND TANK FACILITIES
MSS SP 67 : 2017 BUTTERFLY VALVES
AWWA C150/A21.50 : 2014 THICKNESS DESIGN OF DUCTILE-IRON PIPE
CSA B242 : 2005 : R2016 GROOVE- AND SHOULDER-TYPE MECHANICAL PIPE COUPLINGS
ASTM B 1000 : 2015 Standard Practices for Casting Preparation and Test Procedure of Porcelain Enamel-lined Pipe, Fittings, and Valves for Use in the Municipal Wastewater, Sewage, and Water Treatment Industry
S.R. CEN ISO TS 24817:2011 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COMPOSITE REPAIRS FOR PIPEWORK - QUALIFICATION AND DESIGN, INSTALLATION, TESTING AND INSPECTION
CEN ISO/TS 24817:2011 Petroleum, petrochemical and natural gas industries - Composite repairs for pipework - Qualification and design, installation, testing and inspection (ISO/TS 24817:2006)
ICC 2012 INTERNATIONAL MECH. CODE : 2012 INTERNATIONAL MECHANICAL CODE
ANSI/AWWA C606:2022 Grooved and Shouldered Joints
ASME B31.3 SPANISH : 2010 PROCESS PIPING

ASTM D 3282 : 2015 : REDLINE Standard Practice for Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes
NSF 61 : 2016 DRINKING WATER SYSTEM COMPONENTS - HEALTH EFFECTS
AWWA C104/A21.4 : 2016 CEMENT - MORTAR LINING FOR DUCTILE-IRON PIPE AND FITTINGS EFFECTIVE
AWWA C600 : 2010 INSTALLATION OF DUCTILE-IRON MAINS AND THEIR APPURTENANCES
AWWA C150/A21.50 : 2014 THICKNESS DESIGN OF DUCTILE-IRON PIPE
AWWA C111/A21.11 : 2017 RUBBER-GASKET JOINTS FOR DUCTILE-IRON PRESSURE PIPE AND FITTINGS
ASTM E 8 : 2004 Standard Test Methods for Tension Testing of Metallic Materials
AASHTO T 99 : 2015 METHOD OF TEST FOR MOISTURE-DENSITY RELATIONS OF SOILS USING A 2.5-KG (5.5-LB) RAMMER AND A 305-MM (12-IN.) DROP
AWWA C800 : 2014 UNDERGROUND SERVICE LINE VALVES AND FITTINGS

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.